| Age | Commit message (Collapse) | Author |
|---|
|
Some IA64 machines map all cell-local memory above 4 GB (32 bit limit).
However, in most cases, the kernel needs some memory below that limit that is
DMA-capable. So in this machine configuration, the crashkernel will be reserved
above 4 GB.
For machines that use SWIOTLB implementation because they lack an I/O MMU
the low memory is required by the SWIOTLB implementation. In that case,
it doesn't make sense to reserve the crashkernel at all because it's unusable
for kdump.
A special case is the "hpzx1" machine vector. In theory, it has a I/O MMU, so
it can be booted above 4 GB. However, in the kdump case that is not possible
because of changeset 51b58e3e26ebfb8cd56825c4b396ed251f51dec9:
On HP zx1 machines, the 'machvec=dig' parameter is needed for the kdump
kernel to avoid problems with the HP sba iommu. The problem is that during
the boot of the kdump kernel, the iommu is re-initialized, so in-flight DMA
from improperly shutdown drivers causes an IOTLB miss which leads to an
MCA. With kdump, the idea is to get into the kdump kernel with as little
code as we can, so shutting down drivers properly is not an option.
The workaround is to add 'machvec=dig' to the kdump kernel boot parameters.
This makes the kdump kernel avoid using the sba iommu altogether, leaving
the IOTLB intact. Any ongoing DMA falls harmlessly outside the kdump
kernel. After the kdump kernel reboots, all devices will have been
shutdown properly and DMA stopped.
This patch pushes that functionality into the sba iommu initialization
code, so that users won't have to find the obscure documentation telling
them about 'machvec=dig'.
This means that also for hpzx1 it's not possible to boot when all
memory is above the 4 GB limit. So the only machine vectors that can handle
this case are "sn2" and "uv".
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch adds the basic IA64 machvec infrastructure to support
the SGI "UV" platform.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Races galore... General rule: as soon as it's in descriptor table,
it's over; another thread might have started IO on it/dup2() it
elsewhere/dup2() something *over* it/etc. fd_install() is the very
last step one should take - it's a point of no return.
Besides, the damn thing leaked on failure exits...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Replace TIF_RESTORE_SIGMASK with TS_RESTORE_SIGMASK and define
our own set_restore_sigmask() function. This saves the costly
SMP-safe set_bit operation, which we do not need for the sigmask
flag since TIF_SIGPENDING always has to be set too.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Fix indenting of switch statement to follow CodingStyle, and
pull out handling of call_data into an inlined function.
I confirmed that applying this fix doesn't affect assembled code.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch silences:
WARNING: vmlinux.o(.text+0x44672): Section mismatch in
reference from the function arch_register_cpu() to the
function .cpuinit.text:register_cpu()
Changes are based on codes in arch/x86/kernel/topology.c
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch removes following warning:
WARNING: vmlinux.o(.exit.text+0xb1): Section mismatch in
reference from the function palinfo_exit() to the variable
.cpuinit.data:palinfo_cpu_notifier
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch shuts up the following:
WARNING: vmlinux.o(.text+0x7102): Section mismatch in
reference from the function fixup_irqs() to the function
.devinit.text:ia64_disable_timer()
Removing ia64_disable_timer() is safe because there are no functions
calling it other than the fixup_irqs(),
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch kills:
WARNING: vmlinux.o(.text+0x1702): Section mismatch in
reference from the function acpi_register_ioapic() to the
function .devinit.text:iosapic_init()
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks.
Those low bits are scarce. Renumber TIF_RESTORE_SIGMASK to free one up.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Legacy HP ia64 platforms currently cannot provide
/proc/cpuinfo/physical_id due to legacy SAL/PAL implementations.
However, that physical topology information can be obtained
via ACPI.
Provide an interface that gives ACPI one last chance to provide
physical_id for these legacy platforms. This logic only comes
into play iff:
- ACPI actually provides slot information for the CPU
- we lack a valid socket_id
Otherwise, we don't do anything.
Since x86 uses the ACPI processor driver as well, we provide a nop
stub function for arch_fix_phys_package_id() in asm-x86/topology.h
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Commit 113134fcbca83619be4c68d0ca66db6093777b5d changed the flow of
control when calling PAL_LOGICAL_TO_PHYSICAL and SAL_PHYSICAL_ID_INFO.
With the change, if a platform did not implement the latter, a useless
printk would appear in the boot log:
ia64_sal_pltid failed with -1
So let's check the return code and only printk on a true error, and do
not print anything in the unimplemented case. While we're in there,
clean up some stylistic issues too.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Enable the uncached allocator to allocate multiple pages of contiguous
uncached memory.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- remove unused 'irq' argument from pfm_do_interrupt_handler()
- remove pointless cast to void*
- add KERN_xxx prefix to printk()
- remove braces around singleton C statement
- in tioce_provider.c, start tioce_dma_consistent() and
tioce_error_intr_handler() function declarations in column 0
This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
There are many notify_die() and almost all take same style with
ia64_mca_spin(). This patch defines macros and replace them all,
to reduce lines and to improve readability.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
There are 3 hooks in MCA handler, but this DIE_MCA_MONARCH_PROCESS
event does not notified other than for the first monarch.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
While testing with CONFIG_VIRT_CPU_ACCOUNTING=y, I found that
I occasionally get very huge system time in some threads.
So I dug the issue and finally noticed that it was caused
because of an interrupt which interrupt in the following window:
> [arch/ia64/kernel/entry.S: (!CONFIG_PREEMPT && CONFIG_VIRT_CPU_ACCOUNTING)]
>
> ENTRY(ia64_leave_syscall)
> :
> (pUStk) rsm psr.i
> cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
> (pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
> .work_processed_syscall:
> adds r2=PT(LOADRS)+16,r12
> (pUStk) mov.m r22=ar.itc // fetch time at leave
> adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
> ;;
> <<< window: from here >>>
> (p6) ld4 r31=[r18] // load current_thread_info()->flags
> ld8 r19=[r2],PT(B6)-PT(LOADRS)
> adds r3=PT(AR_BSPSTORE)+16,r12
> ;;
> mov r16=ar.bsp
> ld8 r18=[r2],PT(R9)-PT(B6)
> (p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
> ;;
> ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)
> (p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
> (p6) br.cond.spnt .work_pending_syscall
> ;;
> ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
> ld8 r11=[r3],PT(CR_IIP)-PT(R11)
> (pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
> ;;
> invala
> <<< window: to here >>>
> rsm psr.i | psr.ic // turn off interrupts and interruption collection
If pUStk is true, it means we are going to return user mode, hence we fetch
ar.itc to get time at leave from system.
It seems that it is not possible to interrupt the window if pUStk is true,
because interrupts are disabled early. And also disabling interrupt makes
sense because it is safe for referring current_thread_info()->flags.
However interrupting the window while pUStk is true was possible.
The route was:
ia64_trace_syscall
-> .work_pending_syscall_end
-> .work_processed_syscall
Only in case entering the window from this route, interrupts are enabled
during in the window even if pUStk is true. I suppose interrupts must be
disabled here anyway if pUStk is true.
I'm not sure but afraid that what kind of bad effect were there, other
than crazy system time which I found.
FYI, there was a commit 6f6d75825dc49b082906b84537b4df28293c2977 that
points out a bug at same point(exit of ia64_trace_syscall) in 2006.
It can be said that there was an another bug.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
[IA64] kdump: Add crash_save_vmcoreinfo for INIT
[IA64] Fix NUMA configuration issue
[IA64] Itanium Spec updates
[IA64] Untangle sync_icache_dcache() page size determination
[IA64] arch/ia64/kernel/: use time_* macros
[IA64] remove redundant display of free swap space in show_mem()
[IA64] make IOMMU respect the segment boundary limits
[IA64] kprobes: kprobe-booster for ia64
[IA64] fix getpid and set_tid_address fast system calls for pid namespaces
[IA64] Replace explicit jiffies tests with time_* macros.
[IA64] use goto to jump out do/while_each_thread
[IA64] Fix unlock ordering in smp_callin
[IA64] pgd_offset() constfication.
[IA64] kdump: crash.c coding style fix
[IA64] kdump: add kdump_on_fatal_mca
[IA64] Minimize per_cpu reservations.
[IA64] Correct pernodesize calculation.
[IA64] Kernel parameter for max number of concurrent global TLB purges
[IA64] Multiple outstanding ptc.g instruction support
[IA64] Implement smp_call_function_mask for ia64
...
|
|
Conflicts:
arch/ia64/kernel/mca.c
|
|
Conflicts:
arch/ia64/mm/tlb.c
|
|
|
|
|
|
|
|
|
|
Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility. Thanks to Peter Zijlstra for fixing the lockdep
warning. Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch fixes the problem that kdump by INIT does not work if we use
makedumpfile. The problem is that after INIT is issued, 2nd kernel
starts and makedumpfile fails with the following error message.
/proc/vmcore doesn't contain vmcoreinfo.
'-x' or '-i' must be specified.
makedumpfile Failed.
The cause of this problem is that kernel does not call
crash_save_vmcoreinfo. When kdump starts by panic or sysrq-trigger,
crash_save_vmcoreinfo is called by crash_kexec. But this function is not
called when kdump starts by INIT. The Attached patch fixes this.
This patch just adds crash_save_vmcoreinfo into machine_kdump_on_init so
that crash_save_vmcoreinfo can be called when kdump starts by INIT.
I tested this patch with linux-2.6.25-rc9 and I confirmed it worked.
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
There is a NUMA memory configuration issue in 2.6.24:
A 2-node machine of ours has got the following memory layout:
Node 0: 0 - 2 Gbytes
Node 0: 4 - 8 Gbytes
Node 1: 8 - 16 Gbytes
Node 0: 16 - 18 Gbytes
"efi_memmap_init()" merges the three last ranges into one.
"register_active_ranges()" is called as follows:
efi_memmap_walk(register_active_ranges, NULL);
i.e. once for the 4 - 18 Gbytes range. It picks up the node
number from the start address, and registers all the memory for
the node #0.
"register_active_ranges()" should be called as follows to
make sure there is no merged address range at its entry:
efi_memmap_walk(filter_memory, register_active_ranges);
"filter_memory()" is similar to "filter_rsvd_memory()",
but the reserved memory ranges are not filtered out.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The functions time_before, time_before_eq, time_after, and time_after_eq are
more robust for comparing jiffies against other values.
So use the time_after() & time_before() macros, defined at linux/jiffies.h,
which deal with wrapping correctly
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Add kprobe-booster support on ia64.
Kprobe-booster improves the performance of kprobes by eliminating single-step,
where possible. Currently, kprobe-booster is implemented on x86 and x86-64.
This is an ia64 port.
On ia64, kprobe-booster executes a copied bundle directly, instead of single
stepping. Bundles which have B or X unit and which may cause an exception
(including break) are not executed directly. And also, to prevent hitting
break exceptions on the copied bundle, only the hindmost kprobe is executed
directly if several kprobes share a bundle and are placed in different slots.
Note: set_brl_inst() is used for preparing an instruction buffer(it does not
modify any active code), so it does not need any atomic operation.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: bibo,mao <bibo.mao@intel.com>
Cc: Rusty Lynch <rusty.lynch@intel.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The sys_getpid() and sys_set_tid_address() behavior changed from
return current->tgid
to
struct pid *pid;
pid = current->pids[PIDTYPE_PID].pid;
return pid->numbers[pid->level].nr;
But the fast system calls on ia64 still operate the old way. Patch them
appropriately to let ia64 work with pid namespaces. Besides, this is one more
step in deprecating of pid and tgid on task_struct.
The fsys_getppid() is to be patched as well, but its logic is much
more complex now, so I will make it later.
One thing I'm not 100% sure is the trick with the IA64_UPID_SHIFT. On order
to access the pid->level's element of an array I have to perform the following
calculations
pid + sizeof(struct upid) * pid->level
The problem is that ia64 can only multiply float point registers, while all
the offsets I have in code are in rXX ones. Fortunately, the sizeof(struct
upid) is 32 bytes on ia64 (and is very unlikely to ever change), so the
calculations get simpler:
pid + pid->level << 5
So, I introduce the IA64_UPID_SHIFT and use the shl instruction. I also
looked at how gcc compiles the similar place and found that it makes it with
shift as well. Is this OK to do so?
Tested with ski emulator with 2.6.24 kernel, but fits 2.6.25-rc4 and
2.6.25-rc4-mm1 as well.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
do_each_thread/while_each_thread is a double loop, so
should use 'goto' rather than 'break' to break out
the loop.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
One should normally unlock in the reverse order of the lock calls,
and in this case there certainly is no reason not to.
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Fix indenting of switch statement to follow Documentation/CodingStyle.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
While it is convenient that we can invoke kdump by asserting INIT
via button on chassis etc., there are some situations that invoking
kdump on fatal MCA is not welcomed rather than rebooting fast without
dump.
This patch adds a new flag 'kdump_on_fatal_mca' that is independent
from 'kdump_on_init' currently available. Adding this flag enable
us to turning on/off of kdump depend on the event, INIT and/or fatal
MCA. Default for this flag is to take the dump.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This attached patch significantly shrinks boot memory allocation on ia64.
It does this by not allocating per_cpu areas for cpus that can never
exist.
In the case where acpi does not have any numa node description of the
cpus, I defaulted to assigning the first 32 round-robin on the known
nodes.. For the !CONFIG_ACPI I used for_each_possible_cpu().
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The patch defines kernel parameter "nptcg=". The parameter overrides max number
of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
According to SDM2.2, Itanium supports multiple outstanding ptc.g instructions.
But current kernel function ia64_global_tlb_purge() uses a spinlock to serialize
ptc.g instructions issued by multiple processors. This serialization might have
scalability issue on a big SMP machine where many processors could purge TLB
in parallel.
The patch fixes this problem by issuing multiple ptc.g instructions in
ia64_global_tlb_purge(). It also adds support for the "PALO" table to get
a platform view of the max number of outstanding ptc.g instructions (which
may be different from the processor view found from PAL_VM_SUMMARY).
PALO specification can be found at: http://www.dig64.org/home/DIG64_PALO_R1_0.pdf
spinaphore implementation by Matthew Wilcox.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This interface provides more flexible functionality for smp
infrastructure ... e.g. KVM frequently needs to operate on
a subset of cpus.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Dynamic TR resource should be managed in the uniform way.
Add two interfaces for kernel:
ia64_itr_entry: Allocate a (pair of) TR for caller.
ia64_ptr_entry: Purge a (pair of ) TR by caller.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
We have duplicate code to access registers (access_uarea and regset
way). They just have different layout, so remove duplicate code.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
After we have regset support, we can use CORE_DUMP_USE_REGSET.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This is the 32-bit regset implementation under IA64. Basically register
read/write, which is derived from current ptrace register read/write.
This version added TLS support.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This is the 64-bit regset implementation under IA64. Basically register
read/write, which is derived from current ptrace register read/write.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch does:
- Remove outdated comments (which someday I marked with "?").
- Reassemble instructions to fit them in fewer bundles.
- If McKinley Errata 9 workaround is not needed, the workaround
bundles will be patched out with NOPs. However it also not
needed to have a totally NOP bundle (nop * 3) before branch.
As a result, this makes the code path 3 (or 2) bundles shorter
(and remove 1 unnecessary stop bit). It seems to be 1% faster.
(10sec loop test, with nojitter @ Madison 1.5GHz x 4)
Before:
CPU 0: 0.14 (usecs) (0 errors / 69598875 iterations)
CPU 1: 0.14 (usecs) (0 errors / 69630721 iterations)
CPU 2: 0.14 (usecs) (0 errors / 69607850 iterations)
CPU 3: 0.14 (usecs) (0 errors / 69619832 iterations)
After:
CPU 0: 0.14 (usecs) (0 errors / 70257728 iterations)
CPU 1: 0.14 (usecs) (0 errors / 70309498 iterations)
CPU 2: 0.14 (usecs) (0 errors / 70280639 iterations)
CPU 3: 0.14 (usecs) (0 errors / 70260682 iterations)
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
ia64 named their handler kprobes_fault_handler while all other
arches used kprobe_fault_handler. Change the function definition
and header declaration.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
When EFI_DEBUG is defined to a non-zero value in arch/ia64/kernel/efi.c,
the efi memory regions are displayed. This patch enhances the
display code in a few ways:
1. Use TB, GB and MB as well as KB as units.
Although this introduces rounding errors (KB doesn't as
size is always a multiple of 4Kb), it does make
things a lot more readable.
Also as the range is also shown, it is possible to note the exact size
if it is important. In my experience, the size field is mostly useful
for getting a general idea of the size of a region.
On the rx2620 that I use, there actually is an 8TB region (though not
backed by physical memory, and 8TB really is a lot more readable than
8589934592KB.
2. pad the size field with leading spaces to further improve readability
...
... ( 8MB)
... ( 928MB)
... ( 3MB)
...
vs
...
... (8MB)
... (928MB)
... (3MB)
...
3. Pad the attr field out to 64bits using leading zeros,
to further improve readability.
...
mem05: type= 2, attr=0x0000000000000008, range=[0x0000000004000000-0x000000000481f000) ( 8MB)
mem06: type= 7, attr=0x0000000000000008, range=[0x000000000481f000-0x000000003e876000) ( 928MB)
mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB)
mem08: type= 4, attr=0x0000000000000008, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB)
...
...
mem05: type= 2, attr=0x8, range=[0x0000000004000000-0x000000000481f000) ( 8MB)
mem06: type= 7, attr=0x8, range=[0x000000000481f000-0x000000003e876000) ( 928MB)
mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB)
mem08: type= 4, attr=0x8, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB)
...
4. Use %d instead of %u for the index field, as i is a signed int.
N.B: This code is not compiled unless EFI_DEBUG is non 0.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
__FUNCTION__ is gcc-specific, use __func__
Long lines have been kept where they exist, some small spacing changes
have been done.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
