aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64/pci
AgeCommit message (Collapse)Author
2005-10-28Pull acpi-produce-consume into release branchTony Luck
2005-09-23[IA64] respect ACPI producer/consumer flag for PCI root bridgesBjorn Helgaas
Address space resources for ACPI devices have a producer/consumer flag. All devices "consume" the indicated address space. If the resource is marked as a "producer", the range is also passed on to child devices. We currently ignore this flag when setting up MMIO and I/O port windows for PCI root bridges, so we could mistakenly interpret a "consumed-only" range, like CSR space for the device itself, as a window that is routed to children. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-19[IA64] move ACPI IOSAPIC locality domain mapping from pci.c to acpi.cBjorn Helgaas
Move acpi_map_iosapics() from pci.c to acpi.c, since it doesn't have anything to do with PCI. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07[IA64] Minor cleanups - remove CONFIG_ACPI_DEALLOCATE_IRQKenji Kaneshige
The config option 'CONFIG_ACPI_DEALLOCATE_IRQ' is no longer needed. This patch removes it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-29Pull asm-segment into release branchTony Luck
2005-08-24[IA64] remove use of asm/segment.hKumar Gala
Removed IA64 architecture specific users of asm/segment.h The removal of asm-ia64/segment.h itself can wait until all of the kernel source has been purged of references. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24[PATCH] Export pcibios_bus_to_resourceKeith Owens
pcibios_bus_to_resource is exported on all architectures except ia64 and sparc. Add exports for the two missing architectures. Needed when Yenta socket support is compiled as a module. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[IA64] pcibus_to_node implementation for IA64Christoph Lameter
pcibus_to_node provides a way for the Linux kernel to identify to which node a certain pcibus connects to. Allocations of control structures for devices can then be made on the node where the pci bus is located to allow local access during interrupt and other device manipulation. This patch provides a new "node" field in the the pci_controller structure. The node field will be set based on ACPI information (thanks to Alex Williamson <alex.williamson@hp.com for that piece). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-27[PATCH] acpi bridge hotadd: Read bridge resources when fixing up the busRajesh Shah
Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources are tracked. This is required to properly support pci end device and bridge hotplug. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safeRajesh Shah
PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a new bridge. For root bridge hot-plug, the bridge and it's attached devices may not have been configured properly yet, so it's not safe to claim those resources at this time. This code goes away when we clean up the way pci resources are claimed (in pci_enable_device()), so this is only a stopgap fix. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridgesRajesh Shah
When checking if a PCI to PCI bridge should be enabled to decode memory and/or IO resources, we need to look at all device resources not just the first 6. This is needed to allow PCI bridges to pass down memory and IO accesses to child devices even when the bridge itself does not consume resources in its PCI BARs. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: ACPI based root bridge hot-addRajesh Shah
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21[IA64] remove "pci=routeirq" optionBjorn Helgaas
Remove "pci=routeirq" option for ia64. This was a workaround after ACPI IRQ routing was changed from "all at boot for everything in _PRT" to "do it when the device is enabled" in case there were drivers that didn't use pci_enable_device(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!