aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64
AgeCommit message (Collapse)Author
2005-08-24[PATCH] Export pcibios_bus_to_resourceKeith Owens
pcibios_bus_to_resource is exported on all architectures except ia64 and sparc. Add exports for the two missing architectures. Needed when Yenta socket support is compiled as a module. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23[IA64] Fix simulator boot (for real this time).Peter Chubb
Thanks to Stephane, we've now worked out the real cause of the `Linux will not boot on simulator' problem. Turns out it's a stack overflow because the stack pointer wasn't being initialised properly in boot_head.S (it was being initialised to the lowest instead of the highest address of the stack, so the first push started to overwrite data in the BSS). Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23[IA64] backout incorrect fix for simulator boot issueTony Luck
Earlier fix in 4aec0fb12267718c750475f3404337ad13caa8f5 just masked the real problem. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23Pull prarit-bus-sysdata into release branchTony Luck
2005-08-18[IA64] Simulator bootloader fails with gcc 4Ian Wienand
After building a fresh tree with gcc 4 I can't boot the simulator as the bootloader loader dies with loading /home/ianw/kerntest/kerncomp//build/sim_defconfig/vmlinux... failed to read phdr After some investigation I believe this is do with differences between the alignment of variables on the stack between gcc 3 and 4 and the ski simulator. If you trace through with the simulator you can see that the disk_stat structure value returned from the SSC_WAIT_COMPLETION call seems to be only half loaded. I guess it doesn't like the alignment of the input. Signed-off-by: Ian Wienand <ianw@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17[IA64] Updated tiger defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64] Updated zx1 defconfigPeter Chubb
Just `make oldconfig' doesn't help for the zx1 defconfig --- because we need the MPT Fusion drivers, which are picked up as not selected. Tested on HP ZX2000 and ZX2600. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64] Refresh arch/ia64/configs/sn2_defconfig.Greg Edwards
Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64] Initialize some spinlocksKeith Owens
Some IA64 spinlocks are not being initialized, make it so. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64]: SN fix bus->sysdata pointer and memory cleanupsPrarit Bhargava
The main issue is that bus_fixup calls may potentially call functions that require a valid bus->sysdata pointer. Since this is the case, we must set the bus->sysdata pointer before calling the bus_fixup functions. The remaining changes are simple fixes to make sure memory is cleaned up in the function. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16Auto-update from upstreamTony Luck
2005-08-16[PATCH] fix for ia64 sched-domains codeJohn Hawkes
Fix for ia64 sched domain building triggered by cpuset code. Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Dinakar Guniguntala <dino@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-15[IA64] update CONFIG_PCI descriptionChristoph Hellwig
The current one doesn't even make sense anymore on i386 where it apparently came from. Follow-up wordsmithing by Matthew Wilcox and Tony Luck. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-10[IA64] fix perfmon context loadstephane.eranian@hp.com
The PFM_LOAD_CONTEXT may fail silently and cause a session to remain reserved even though it should not. This can happen when the commands succeeds in reserving the session but fails when it actually tries to attach to the load_pid. In that case, the command has failed but will return 0. More importantly, the session will remain reserved. This patch fixes the problem. Signed-off-by: <stephane.eranian@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-08[IA64] fix nohalt boot optionKen Chen
this changeset broke the "nohalt" kernel boot option. 8df5a500a3e97f7811cdce0f553ca1917ccd4220 default_idle() is looking at new variable can_do_pal_halt. However, that variable did not get cleared upon "nohalt" boot option. Result is that "nohalt" option is ignored until perfmon is exercised. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-01[PATCH] remove sys_set_zone_reclaim()Ingo Molnar
This removes sys_set_zone_reclaim() for now. While i'm sure Martin is trying to solve a real problem, we must not hard-code an incomplete and insufficient approach into a syscall, because syscalls are pretty much for eternity. I am quite strongly convinced that this syscall must not hit v2.6.13 in its current form. Firstly, the syscall lacks basic syscall design: e.g. it allows the global setting of VM policy for unprivileged users. (!) [ Imagine an Oracle installation and a SAP installation on the same NUMA box fighting over the 'optimal' setting for this flag. What will they do? Will they try to set the flag to their own preferred value every second or so? ] Secondly, it was added based on a single datapoint from Martin: http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2 where Martin characterizes the numbers the following way: ' Run-to-run variability for "make -j" is huge, so these numbers aren't terribly useful except to see that with reclaim the benchmark still finishes in a reasonable amount of time. ' in other words: the fundamental problem has likely not been solved, only a tendential move into the right direction has been observed, and a handful of numbers were picked out of a set of hugely variable results, without showing the variability data. How much variance is there run-to-run? I'd really suggest to first walk the walk and see what's needed to get stable & predictable kernel compilation numbers on that NUMA box, before adding random syscalls to tune a particular aspect of the VM ... which approach might not even matter once the whole picture has been analyzed and understood! The third, most important point is that the syscall exposes VM tuning internals in a completely unstructured way. What sense does it make to have a _GLOBAL_ per-node setting for 'should we go to another node for reclaim'? If then it might make sense to do this per-app, via numalib or so. The change is minimalistic in that it doesnt remove the syscall and the underlying infrastructure changes, only the user-visible changes. We could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka /proc/sys/vm/swappiness, but even that looks quite counterproductive when the generic approach is that we are trying to reduce the number of external factors in the VM balance picture. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[IA64] unwind.c uses wrong unat from switch_stackKeith Owens
unwind.c can read the wrong unat bits from switch_stack. sw->caller_unat is the value of ar.unat when the task was blocked. sw->ar_unat is the value of ar.unat after doing st8.spill for r4-7. IOW, ar_unat is caller_unat with 4 bits changed. unw_access_gr() uses sw->ar_unat for r4-7 (correct), but it also uses sw->ar_unat for other scratch registers (incorrect). sw->ar_unat should only be used for r4-7, everything else should use sw->caller_unat, unless modified by unwind info. Using sw->ar_unat risks picking up the 4 bits that were overwritten when r4-7 were saved. Also this line is wrong unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_UNAT); and should be unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_PFS); Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27[IA64] inotify: ia64 syscalls.Robert Love
Attached patch adds the inotify syscalls to ia64. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-26[PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIOSteven Rostedt
Here's the patch again to fix the code to handle if the values between MAX_USER_RT_PRIO and MAX_RT_PRIO are different. Without this patch, an SMP system will crash if the values are different. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] Don't export machine_restart, machine_halt, or machine_power_off.Eric W. Biederman
machine_restart, machine_halt and machine_power_off are machine specific hooks deep into the reboot logic, that modules have no business messing with. Usually code should be calling kernel_restart, kernel_halt, kernel_power_off, or emergency_restart. So don't export machine_restart, machine_halt, and machine_power_off so we can catch buggy users. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14[IA64] Fix undefined reference to can_cpei_retarget for simulatorIan Wienand
The simulator build doesn't turn on ACPI, so doesn't have a definition of can_cpei_retarget. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-13Auto merge with /home/aegl/GIT/linusTony Luck
2005-07-13[IA64] fix call of smp_processor_id() by XPC whileDean Nelson
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch replaces the two calls to smp_processor_id() by a single call to raw_smp_processor_id() since any CPU within the partition will do. Signed-off-by: Dean Nelson <dcn@sgi.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] Altix pcibus_to_node implementationChristoph Lameter
The Altix subarch does not provide node information via ACPI. Instead hooks are used to fixup pci structures. This patch determines the nodes for Altix PCI busses. Remote Bridges: --------------- Altix supports remote I/O nodes without memory or processors but with bridges. The TIOCA type of bridge is an AGP bridge and the PROM provides information about the closest node. That information will be returned by pcibus_to_node. The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a closest node id. pcibus_to_node will return -1 for devices on those bridges meaning that device control structures may be allocated on any node. Safeguard: ---------- Should the fixups result in invalid node information for a pci controller then a warning will be printed and pcibus_to_node will return -1. This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that dma_alloc_coherent will now use alloc_pages_node to allocate memory local to the node that the PCI device is connected to. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] improve flush_icache_range()Zoltan Menyhart
Check with PAL to see what the i-cache line size is for each level of the cache, and so use the correct stride when flushing the cache. Acked-by: David Mosberger Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12[IA64] remove CONFIG_IA64_SGI_SN_SIMGreg Edwards
This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing any kernel bootable on sn2 to also be booted in the simulator. Boot tested on Altix and HP rx2600. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-07-12[IA64] pcibus_to_node implementation for IA64Christoph Lameter
pcibus_to_node provides a way for the Linux kernel to identify to which node a certain pcibus connects to. Allocations of control structures for devices can then be made on the node where the pci bus is located to allow local access during interrupt and other device manipulation. This patch provides a new "node" field in the the pci_controller structure. The node field will be set based on ACPI information (thanks to Alex Williamson <alex.williamson@hp.com for that piece). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[ACPI] fix C1 patch for IA64Venkatesh Pallipadi
http://bugzilla.kernel.org/show_bug.cgi?id=4233 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[NET]: add a top-level Networking menu to *configSam Ravnborg
Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12[ACPI] Evaluate CPEI Processor Override flagAshok Raj
ACPI 3.0 added a Correctable Platform Error Interrupt (CPEI) Processor Overide flag to MADT.Platform_Interrupt_Source. Record the processor that was provided as hint from ACPI. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[IA64] assign_irq_vector() should not panicKenji Kaneshige
Current assign_irq_vector() will panic if interrupt vectors is running out. But I think how to handle the case of lack of interrupt vectors should be handled by the caller of this function. For example, some PCI devices can raise the interrupt signal via both MSI and I/O APIC. So even if the driver for these device fails to allocate a vector for MSI, the driver still has a chance to use I/O APIC based interrupt. But currently there is no chance for these driver to use I/O APIC based interrupt because kernel will panic when assign_irq_vector() fails to allocate interrupt vector. The following patch changes assign_irq_vector() for ia64 to return -ENOSPC on error instead of panic (as i386 and x86_64 versions do). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11[IA64] use msleep_interruptible() instead of schedule_timeoutNishanth Aravamudan
Description: Replace schedule_timeout() with msleep_interruptible() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11[IA64] remove linux/version.h include from arch/ia64Olaf Hering
changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-08[IA64] Fix a typo in arch/ia64/kernel/entry.SH. J. Lu
Both 2.4 and 2.6 kernels need this patch for the next binutils. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-07[IA64] - Disable tiocx driver on non-SN systemsJack Steiner
Disable the tiocx driver on non-SN systems. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] fix generic/up buildsTony Luck
Jesse Barnes provided the original version of this patch months ago, but other changes kept conflicting with it, so it got deferred. Greg Edwards dug it out of obscurity just over a week ago, and almost immediately another conflicting patch appeared (Bob Picco's memory-less nodes). I've resolved the conflicts and got it running again. CONFIG_SGI_TIOCX is set to "y" in defconfig, which causes a Tiger to not boot (oops in tiocx_init). But that can be resolved later ... get this in now before it gets stale again. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] memory-less-nodes repostbob.picco
I reworked how nodes with only CPUs are treated. The patch below seems simpler to me and has eliminated the complicated routine reassign_cpu_only_nodes. There isn't any longer the requirement to modify ACPI NUMA information which was in large part the complexity introduced in reassign_cpu_only_nodes. This patch will produce a different number of nodes. For example, reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node configuration to one memory+CPUs node configuration. This patch doesn't change the number of nodes which means the user will see three. Two nodes without memory and one node with all the memory. While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving any useful purpose. It is called once in find_pernode_space but the value isn't used to computer pernode space. Signed-off-by: bob.picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] Make ia64 die() preempt safe
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06Auto merge with /home/aegl/GIT/linusTony Luck
2005-07-06[IA64] restore_sigcontext is not preempt safeKeith Owens
restore_sigcontext calls ia64_set_local_fpu_owner() which requires that preempt be disabled. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver codePrarit Bhargava
This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver - new SN PROM version codePrarit Bhargava
This patch is a rewrite of the code to check the PROM version. The current code has some deficiences in the way PROM comparisons were made. The minimum value of PROM that will boot has also been changed to 4.04. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver: moving of header filesPrarit Bhargava
This patch moves header files out of the arch/ia64/sn directories and into include/asm-ia64/sn. These files were being included by other subsystems and should be under include/asm-ia64/sn. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver: SN IRQ FixesPrarit Bhargava
This patch fixes the SN IRQ code such that cpu affinity and Hotplug can modify IRQ values. The sn_irq_info structures are now locked using a RCU lock mechanism to avoid lock contention in the lost interrupt WAR code. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-05[PATCH] kprobes: fix namespace problem and sparc64 buildRusty Lynch
The following renames arch_init, a kprobes function for performing any architecture specific initialization, to arch_init_kprobes in order to cleanup the namespace. Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes build from the last return probe patch. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29[IA64] Update zx1_defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29[IA64] Update tiger_defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29Auto merge with /home/aegl/GIT/linusTony Luck