aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64
AgeCommit message (Collapse)Author
2005-05-05[PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.cAnton Blanchard
While looking at code generated by gcc4.0 I noticed some functions still had frame pointers, even after we stopped ppc64 from defining CONFIG_FRAME_POINTER. It turns out kernel/Makefile hardwires -fno-omit-frame-pointer on when compiling schedule.c. Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures that dont require frame pointers in sched.c code. (akpm: blame me for the name) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
2005-05-04[IA64-SGI] move nodepda pointer out of pdaDean Nelson
Remove the p_nodepda and p_subnodepda pointers from the pda_s structure. And then define a new per-cpu pointer to the nodepda and export it so that it can be accessed by kernel modules. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] Update arch/ia64/configs/tiger_defconfigTony Luck
Kristen did most of the checking, bring this up to -rc2. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] Fix two warnings introduced by perfmon patches.Tony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] another perfmon fix (take2)stephane eranian
- pfm_context_load(): change return value from EINVAL to EBUSY when context is already loaded. - pfm_check_task_state(): pass test if context state is MASKED. It is safe to give access on PFM_CTX_MASKED because the PMU state (PMD) is stable and saved in software state. This helps multiplexing programs such as the example given in libpfm-3.1. Signed-off-by: stephane eranian <eranian@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] perfmon & PAL_HALT againStephane Eranian
The pmu_active test is based on the values of PSR.up. THIS IS THE PROBLEM as it does not take into account the lazy restore logic which is as follow (simplified): context switch out: save PMDs clear psr.up release ownership context switch in: if (ctx->last_cpu == smp_processor_id() && ctx->cpu_activation == cpu_activation) { set psr.up return } restore PMD restore PMC ctx->last_cpu = smp_processor_id(); ctx->activation = ++cpu_activation; set psr.up The key here is that on context switch out, we clear psr.up and on context switch in we check if nobody else used the PMU on that processor since last time we came. In that case, we assume the PMD/PMC are ours and we simply reactivate. The Caliper problem is that between the moment we context switch out and the moment we come back, nobody effectively used the PMU BUT the processor went idle. Normally this would have no incidence but PAL_HALT does alter the PMU registers. In default_idle(), the test on psr.up is not strong enough to cover this case and we go into PAL which trashed the PMU resgisters. When we come back we falsely assume that this is our state yet it is corrupted. Very nasty indeed. To avoid the problem it is necessary to forbid going to PAL_HALT as soon as perfmon installs some valid state in the PMU registers. This happens with an application attaches a context to a thread or CPU. It is not enough to check the psr/dcr bits. Hence I propose the attached patch. It adds a callback in process.c to modify the condition to enter PAL on idle. Basically, now it is conditional to pal_halt=1 AND perfmon saying it is okay. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] altix: fix TIOCA dmamap list_addMark Maule
Correct a bug where tioca_dma_mapped() is putting tioca dma map structs on the wrong list. Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] SAL to OS callbacks cannot call sleepingKeith Owens
When SAL calls back into the OS, the OS code is running with preempt disabled so it cannot call sleeping functions. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] MCA recovery improvementsRuss Anderson
Jack Steiner uncovered some opportunities for improvement in the MCA recovery code. 1) Set bsp to save registers on the kernel stack. 2) Disable interrupts while in the MCA recovery code. 3) Change the way the user process is killed, to avoid a panic in schedule. Testing shows that these changes make the recovery code much more reliable with the 2.6.12 kernel. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] fix ia64 syscall auditingDavid Woodhouse
Attached is a patch against David's audit.17 kernel that adds checks for the TIF_SYSCALL_AUDIT thread flag to the ia64 system call and signal handling code paths. The patch enables auditing of system calls set up via fsys_bubble_down, as well as ensuring that audit_syscall_exit() is called on return from sigreturn. Neglecting to check for TIF_SYSCALL_AUDIT at these points results in incorrect information in audit_context, causing frequent system panics when system call auditing is enabled on an ia64 system. I have tested this patch and have seen no problems with it. [Original patch from Amy Griffis ported to current kernel by David Woodhouse] From: Amy Griffis <amy.griffis@hp.com> From: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] reduce cacheline bouncing in cpu_idle_waitZwane Mwaikambo
Andi noted that during normal runtime cpu_idle_map is bounced around a lot, and occassionally at a higher frequency than the timer interrupt wakeup which we normally exit pm_idle from. So switch to a percpu variable. I didn't move things to the slow path because it would involve adding scheduler code to wakeup the idle thread on the cpus we're waiting for. Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] Altix only: Fix for sn_dma_flushMike Habeck
The following patch fixes a bug in the SGI Altix sn_dma_flush code. sn_dma_flush is broken in 2.6. The code isn't waiting for the DMA data to be flushed out of the PIC ASIC. This patch is based off the linux-ia64-test-2.6.12 tree Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] use common pxm functionAlex Williamson
This patch simplifies a couple places where we search for _PXM values in ACPI namespace. Thanks, Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] Altix only: Register Error InterruptColin Ngam
The following patch ensures that the correct error interrupt handling routine is initialized. This patch is based on the 2.6.12 ia64 release tree. Signed-off-by: Colin Ngam <cngam@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] convert AMO address found in XPC's reserved pageDean Nelson
This patch detects the existence of an uncached physical AMO address setup by EFI's XPBOOT (SGI) and converts it to an uncached virtual AMO address. Depends on a patch submitted on 23 March 2005 with the subject of: [PATCH 2/3] SGI Altix cross partition functionality (2nd revision) Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] SGI Altix cross partition functionality [3/3]Dean Nelson
This patch contains the cross partition pseudo-ethernet driver (XPNET) functional support module. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] SGI Altix cross partition functionality [2/3]Dean Nelson
This patch contains the communication module (XPC) for cross partition communication on a partitioned SGI Altix. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] manually apply changes to arch/ia64/sn/kernel/MakefileTony Luck
cg-patch couldn't apply the patch to Makefile, and my dumb script rushed on and ran cg-commit without this change. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] SGI Altix cross partition functionality (2ndDean Nelson
This patch contains the shim module (XP) which interfaces between the communication module (XPC) and the functional support modules (like XPNET). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[PATCH] move cnodeid_to_nasid_table out of pdaDean Nelson
Another step in the effort to eliminate the SN pda structure. This patch moves the cnodeid_to_nasid_table field out of the pda, making it a standalone per-cpu data item, and exports it so it can be accessed by kernel modules. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] Altix patch to add bricktype knowledge to tiocxBruce Losure
Here is a patch to enable the SGI tiocx bus driver to distingush between FPGA-attached h/w and non-FPGA-attached h/w. Signed-off-by: Bruce Losure <blosure@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64-SGI] Altix only: Remove hubdev SAL call Bruce Losure
Hi Tony, This patch against ia64-test-2.6.12 fixes a bug where the tiocx code was inadvertently un-doing some address modifications done in earlier fixup code. This patch just removes the offending code. Signed-off-by: Bruce Losure <blosure@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] use fc.i for fluch_icache_range()David Mosberger-Tang
This is a small patch to switch fluch_icache_range() to use fc.i instead of fc. This would save time on processors which can establish i-cache coherency without flushing the cache-line out to memory (not that any current processors do). On existing processors, fc.i behaves like fc. The only caveat is that very old assemblers may not know about fc.i yet. Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] fix typos caught by new assemblerDavid Mosberger-Tang
Patch below fixes 3 trivial typos which are caught by the new assembler (v2.169.90). Please apply. [Note: fix to memcpy that was also part of this patch was separately applied from patches by H.J. and Andreas ... so the delta here only has the other two fixes. -Tony] Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] Fix memcpy_mck.S for current binutilsAndreas Schwab
The current ia64 assembler complains about mismatching .proc/.endp pairs. (Same patch also sent by H.J. Lu) Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] Add config SCHED_SMTSuresh Siddha
Now that we have MC/MT detection patches in, appended patch allows us to configure MT scheduler optimizations. For now, we will this option off by default. There is some discussion going on lkml about setting up sched-domains which are absolutely needed (like for example, we shouldn't setup SMT domain for non MT processors). Once that patch goes in, we can enable this option by default. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
2005-05-01[PATCH] convert that currently tests _NSIG directly to use valid_signal()Jesper Juhl
Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] consolidate sys_shmatStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-29[PATCH] fix ia64 syscall auditingAmy Griffis
Attached is a patch against David's audit.17 kernel that adds checks for the TIF_SYSCALL_AUDIT thread flag to the ia64 system call and signal handling code paths.The patch enables auditing of system calls set up via fsys_bubble_down, as well as ensuring that audit_syscall_exit() is called on return from sigreturn. Neglecting to check for TIF_SYSCALL_AUDIT at these points results in incorrect information in audit_context, causing frequent system panics when system call auditing is enabled on an ia64 system. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29[AUDIT] Don't allow ptrace to fool auditing, log arch of audited syscalls.
We were calling ptrace_notify() after auditing the syscall and arguments, but the debugger could have _changed_ them before the syscall was actually invoked. Reorder the calls to fix that. While we're touching ever call to audit_syscall_entry(), we also make it take an extra argument: the architecture of the syscall which was made, because some architectures allow more than one type of syscall. Also add an explicit success/failure flag to audit_syscall_exit(), for the benefit of architectures which return that in a condition register rather than only returning a single register. Change type of syscall return value to 'long' not 'int'. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-25From: jbarnes@sgi.comJesse Barnes
[IA64] fix ia64 Kconfig to allow CONFIG_PM on sn2 This probably should have been fixed when I fixed up the generic build for discontig+numa machines, but oh well. CONFIG_PM is allowable for generic builds but not for sn2 builds, which doesn't make much sense, and in fact breaks the build if recent ACPI bits are added to the tree. It looks like the only arch that needs to prevent CONFIG_PM stuff is the ski simulator (though those options could probably use some cleanup as well), so remove the big conditional and replace it with a simple test for IA64_HP_SIM instead. Signed-off-by: Jesse Barnes <jbarnes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] iosapic.c: typo ... s/spin_unlock_irq/spin_unlock/Kenji Kaneshige
vector sharing patch had a typo ... mismatched spin_lock() with a spin_unlock_irq(). Fix from Kenji Kaneshige. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] print "siblings" before {physical,core,thread} idTony Luck
Rohit and Suresh changed their mind about the order to print things in /proc/cpuinfo, but didn't include the change in the version of the patch they sent to me. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] vector sharing (Large I/O system support)Kenji Kaneshige
Current ia64 linux cannot handle greater than 184 interrupt sources because of the lack of vectors. The following patch enables ia64 linux to handle greater than 184 interrupt sources by allowing the same vector number to be shared by multiple IOSAPIC's RTEs. The design of this patch is besed on "Intel(R) Itanium(R) Processor Family Interrupt Architecture Guide". Even if you don't have a large I/O system, you can see the behavior of vector sharing by changing IOSAPIC_LAST_DEVICE_VECTOR to fewer value. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] multi-core/multi-thread identificationSuresh Siddha
Version 3 - rediffed to apply on top of Ashok's hotplug cpu patch. /proc/cpuinfo output in step with x86. This is an updated MC/MT identification patch based on the previous discussions on list. Add the Multi-core and Multi-threading detection for IPF. - Add new core and threading related fields in /proc/cpuinfo. Physical id Core id Thread id Siblings - setup the cpu_core_map and cpu_sibling_map appropriately - Handles Hot plug CPU Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Gordon Jin <gordon.jin@intel.com> Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] __copy_user breaks on unaligned srcKeith Owens
memcpy_mck.S::__copy_user breaks in the prefetch code under these conditions :- * src is unaligned and * dst is near the end of a page and * the page after dst is unmapped. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] Need to handle lfetch in "no_context" case.Tony Luck
Thanks to Mark for tracking down this one. Users of __copy_from_user_inatomic() will be sad if we don't handle lfetch faults for the "no_context" case. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Altix SN add support for slots in geoid_t locatorMark Goodwin
This patch against ia64-test-2.6.12 is needed for forthcoming Altix chipsets. It renames geoid_any_t to geoid_common_t and splits the 8bit 'slab' field into two 4bit fields for 'slab' and 'slot'. Similar changes in the Altix SAL will retain backward compatibility for old kernels. Signed-off-by: Mark Goodwin <markgw@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] fix syscall-optimization goofDavid Mosberger-Tang
Sadly, I goofed in this syscall-tuning patch: ChangeSet 1.1966.1.40 2005/01/22 13:31:05 davidm@hpl.hp.com [IA64] Improve ia64_leave_syscall() for McKinley-type cores. Optimize ia64_leave_syscall() a bit better for McKinley-type cores. The patch looks big, but that's mostly due to renaming r16/r17 to r2/r3. Good for a 13 cycle improvement. The problem is that the size of the physical stacked registers was loaded into the wrong register (r3 instead of r17). Since r17 by coincidence always had the value 1, this had the effect of turning rse_clear_invalid into a no-op. That poses the risk of leaking kernel state back to user-land and is hence not acceptable. The fix below is simple, but unfortunately it costs us about 28 cycles in syscall overhead. ;-( Unfortunately, there isn't much we can do about that since those registers have to be cleared one way or another. --david Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Shub2 BTE support - BTE recovery codeRuss Anderson
patch 2: Shub2 BTE recovery code will be implemented in SAL. Define the SAL interface. Modify bte_error to call SAL for shub2. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Add new MMR definitions/Modify BTE initialiation&copy.Russ Anderson
patch 1: Add new MMR definitions. Modify BTE initialiation. Modify BTE copy. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] disable TIOCA GART TLB prefetchingMark Maule
Patch to disable SGI TIOCA GART TLB prefetching due to hw bug. Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] MAX_PGT_FREES_PER_PASS must be 'L' to avoid warningTony Luck
'min' is very picky about types of arguments, make it happy Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] sba_iommu bug fixesAlex Williamson
This fixes a couple of bugs in the zx1/sx1000 sba_iommu. These are all pretty low likelihood of hitting. The first problem is a simple off by one, deep in the sba_alloc_range() error path. Surrounding that was a lock ordering problem that could have potentially deadlocked with the order the locks are grabbed in sba_unmap_single(). I moved the resource locking into sba_search_bitmap() to prevent this. Finally, there's a potential race between unmapping pdir entries and marking incoming DMA pages clean. If you see any oddities, please let me know, but I've tested it pretty thoroughly here. Tony, please apply. Thanks, BTW, many of the options in this driver not on by default are becoming more and more broken. I'll be working on some patches to clean them out, but I wanted to get this bug fix out first. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] Percpu quicklist for combined allocator for pgd/pmd/pte.Robin Holt
This patch introduces using the quicklists for pgd, pmd, and pte levels by combining the alloc and free functions into a common set of routines. This greatly simplifies the reading of this header file. This patch is simple but necessary for large numa configurations. It simply ensures that only pages from the local node are added to a cpus quicklist. This prevents the trapping of pages on a remote nodes quicklist by starting a process, touching a large number of pages to fill pmd and pte entries, migrating to another node, and then unmapping or exiting. With those conditions, the pages get trapped and if the machine has more than 100 nodes of the same size, the calculation of the pgtable high water mark will be larger than any single node so page table cache flushing will never occur. I ran lmbench lat_proc fork and lat_proc exec on a zx1 with and without this patch and did not notice any change. On an sn2 machine, there was a slight improvement which is possibly due to pages from other nodes trapped on the test node before starting the run. I did not investigate further. This patch shrinks the quicklist based upon free memory on the node instead of the high/low water marks. I have written it to enable preemption periodically and recalculate the amount to shrink every time we have freed enough pages that the quicklist size should have grown. I rescan the nodes zones each pass because other processess may be draining node memory at the same time as we are adding. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI]Bruce Losure
Missed the "bk new" for this file in the last commit. Signed-off-by: Bruce Losure <blosure@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Altix: enable poweroffAaron J Young
This patch adds the necessary "hook" to allow SGI/SN machines to perform a system power off upon a 'init 0', 'halt -p', 'poweroff' or 'shutdown -h'. The "hook" is to set the pm_power_off callback to ia64_sn_power_down(). pm_power_off is checked in machine_power_off()/do_poweroff() and, if set, is executed. ia64_sn_power_down() is a function already present (but not used currently) in the sn kernel. ia64_sn_power_down() makes a SAL call to execute the power off. Signed-off-by: Aaron J Young <ayoung@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Bus driver for the CX port of SGI's TIO chip.Bruce Losure
This patch is to provide CX port infrastructure for SGI TIO-based h/w. Also a 'core services' driver for SGI FPGA-based h/w. Signed-off-by: Bruce Losure <blosure@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>