aboutsummaryrefslogtreecommitdiff
path: root/arch/m68knommu
AgeCommit message (Collapse)Author
2006-02-14[PATCH] hrtimer: round up relative start time on low-res archesIngo Molnar
CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that they simply return xtime in do_gettimeoffset(). In this corner-case we want to round up by resolution when starting a relative timer, to avoid short timeouts. This will go away with the GTOD framework. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07[PATCH] m68knommu: need pm_power_off in m68knommuGreg Ungerer
Need place holders for the power management power off and idle functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68knommu: task_stack_page()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] m68knommu: fix ram length of m5208evb boardGreg Ungerer
Adjust length of M5208EVB ram define. It should size up to 32MB after adding in the dBUG reserved 128k. Problem pointed out be Milton Miller <miltonm@bga.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] m68knommu: fix a5 reg corruption in signal handlersGreg Ungerer
This is a patch adapted from a posting by Andrea Tarani which was pointed out to me by Bernardo Innocenti. Thanks to both of them for their help and patience. The original posting is here: http://mailman.uclinux.org/pipermail/uclinux-dev/2005-July/033543.html The problem first manifest itself as busybox ping terminating with an "Illegal instruction". I reduced this to a test case and found that variable size arrays allocated on the stack could lead to stacks not aligned on 32 bit boundaries. For the Coldfire this proved fatal. Having been pointed out this patch by Bernardo, I applied it and it fixed the first test case. I then went back to busybox's ping. This still failed with "Illegal instruction", but in a different way. Before it depended on the size allocated for the ping buffer, now it happened every time. I also found it depended on optimisation level (gcc-3.4.0) -Os was okay but not -O2. After a lot of looking, it turned out that register a5 was being corrupted by the signal handler (after applying the patch). I re-worked the patch a bit to save/restore a5 and now all seems well. Patch submitted by Stuart Hughs <stuarth@freescale.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] m68knommu: fix mangled 'truct' in ptrace.cGreg Ungerer
Fix broken "truct" -> "struct" in arch_ptrace() parameter list. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] m68knommu: don't set gcc optimizer flagsGreg Ungerer
Don't specify compiler optimization flags in the m68knommu Makefile. Let the top level Makefile/config set it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] dump_thread() cleanupakpm@osdl.org
) From: Adrian Bunk <bunk@stusta.de> - create one common dump_thread() prototype in kernel.h - dump_thread() is only used in fs/binfmt_aout.c and can therefore be removed on all architectures where CONFIG_BINFMT_AOUT is not available Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] tiny: Make *[ug]id16 support optionalMatt Mackall
Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] m68knommu: enable_irq/disable_irqChristoph Hellwig
mach_enable_irq/mach_disable_irq are never actually set, so let's remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: move some platform irq support out of irq.hGreg Ungerer
Move some of the m68knommu platform specific irq core support to its own header, irqnode.h. Having it in asm-m68knommu/irq.h causes some build pain, since it is included in a number of common code places (and not all the required definitions will be included at these places). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: add ColdFire 5208 configure supportGreg Ungerer
Added support for the new Freescale 5208 ColdFire processor. Also changed name "Motorola" to new company name "Freescale". Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: align param section and add 5208EVB linker supportGreg Ungerer
Align the param section. It can end up starting on an unalingned boundary depending on the size of ksymtab_strings. If it is unaligned things like modules will fail to load with unaligned access traps. Add linker scipt support for the M5208EVB board. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: handle non base address 0 memory of M5208EVB boardGreg Ungerer
The Freescale M5208EVB ColdFire eval board is one of the few that doesn't have its DRAM based at address 0. Handle this special case in the common ColdFire startup code. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: modify the ColdFire PIT timer for new 5208Greg Ungerer
Modified common ColdFire PIT timer code to support the 5208 as well. It uses a different set of mask and interrupt bits than other ColdFire processors. The defines for these bits have been moved in header files and set appropriately for the different processor varients. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: platform config code for 5208 ColdFireGreg Ungerer
Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: add ColdFire 5208 and M5208EVB build supportGreg Ungerer
Add build support for the new Freescale 5208 ColdFire processor, and its M5208EVB eval board. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: use the ColdFire PIT timer for new 5208Greg Ungerer
The Freescale 5208 ColdFire uses the common PIT timer code for its internal timer. Build it when configured for the 5208 processor. Add support for the internal register map of the 5208 ColdFire fmaily. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: add 5208 ColdFire platform MakefileGreg Ungerer
Add Freescale 5208 ColdFire platform Makefile. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: add ColdFire 5208 setup supportGreg Ungerer
Add setup support for the new Freescale 5208 ColdFire processor. (Also fixed a little typo in there, "UNKOWN" -> "UNKNOWN"). Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] consolidate sys_ptrace()Christoph Hellwig
The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] m68knommu: updated defconfigGreg Ungerer
Updated m68knommu defconfig. Part of changing the "Motorola" names to their new name "Freescale". Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] jiffies_64 cleanupThomas Gleixner
Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] unify sys_ptrace prototypeChristoph Hellwig
Make sure we always return, as all syscalls should. Also move the common prototype to <linux/syscalls.h> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] m68knommu: startup code for the Drangen Engine 68328 based boardGreg Ungerer
Specialized startup code for the 68328 based DragenEngine board. It doesn't easily fit into the common 68x328 startup code framework. It doesn't want any of the common hardware setup to be done here. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: common RAM based 68360 startup codeGreg Ungerer
Create common start code for all 68360 based platforms that are loaded and run directly from RAM (as opposed to running from flash/ROM). This replaces the old specific startup code for each board. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: common ROM/flash based 68360 startup codeGreg Ungerer
Create common start code for all 68360 based platforms that are loaded and run directly from ROM/flash (as opposed to running from RAM). This replaces the old specific startup code for each board. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds
2005-09-09kbuild: h8300,m68knommu,sh,sh64 use generic asm-offsets.h supportSam Ravnborg
h8300, m68knommu, sh and sh64 all used the name asm-offsets.h so minimal changes required. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-08[PATCH] m68knommu: extract common timer code for 68EZ328 processorGreg Ungerer
Rework the 68x328 configuration and setup code. All 68x328 varients share the same timer hardware. So extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: create common timer code for 68x328 processor varientsGreg Ungerer
Create common timer code for all 68x328 processor varients. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: register map setup for MOD5272 boardGreg Ungerer
The boot loader on the MOD5272 board doesn't set the register maping, so set it in the 5272 init code. There was code in there to support this, but we had never needed to use it before. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: add timer support for the 523x ColdFire processor familyGreg Ungerer
Add timer support for the ColdFire 523x processor family. (It uses the ColdFire PIT timer hardware, so we just build that in). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: extract common timer code for 68328 processorGreg Ungerer
Rework the 68x328 configuration and setup code. All 68x328 varient share the same timer hardware, so extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: create common config code for all 68VZ328 platformsGreg Ungerer
Create common 68VZ328 config code. It is essentially the same for all boards that use this, so no point having a version of it for each. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: remove DrangonEngine2 specific config codeGreg Ungerer
Remove DragonEngine2 specific config code. Use common 68VZ328 config code now. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: remove uCdimm specific config codeGreg Ungerer
Remove uCdimm specific config code. Use common 68VZ328 config code now. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: 523x ColdFire processor init/config MakefileGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] NTP: ntp-helper functionsjohn stultz
This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds
2005-09-02[PATCH] m68knommu: update defconfig for m68knommuGreg Ungerer
Updated defconfig for m68knommu arch. Patch originaly submitted by Jan Dittmer <jdittmer@ppp0.net> Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: new board support in linker scriptGreg Ungerer
. add support for the M5235EVB board . add support for the SOM5282 board . add support for the MOD5272 board . fix end of memory define for eLITE board Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: use THREAD_SIZE instead of hard coded sizeGreg Ungerer
Use the THREAD_SIZE define when manipulating the stack instead of hard coded values (for the 68328 and 68360 sub-architectures). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: new family (523x) and board config supportGreg Ungerer
New architecture and board configuration support for m68knommu. . add 523x ColdFire support . add support for SOM5282 and MOD5272 boards . break up the 527x to be separate 5271 and 5275. There is some subtle differences that (like RAM config) that need to be dealt with . add option to support selecting 4k kernel stack Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: 523x ColdFire processor support in arch MakefileGreg Ungerer
Add support for the 523x ColdFire family of processors Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: cleanup showstack()Greg Ungerer
Make show_stack() consistent with other architectures. Put the vector string names in the .rodata section. Patch originally submitted by Philippe De Muyter <phdm@macqel.be>. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: fix ColdFire startup code to properly handle non 0 based ramGreg Ungerer
Correctly determine the end of ram for ram setups that do not start at base address of 0. Add support for the MOD5272 board, which doesn not have a ram base of 0. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: new family (523x) and board setupGreg Ungerer
. setup for the new 523x ColdFire family . break up of 527x to be 5271 and 5275 . some white space cleanup Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: 523x ColdFire processor init codeGreg Ungerer
Low level initialization code for the 523x ColdFire processor family. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] convert signal handling of NODEFER to act like other Unix boxes.Steven Rostedt
It has been reported that the way Linux handles NODEFER for signals is not consistent with the way other Unix boxes handle it. I've written a program to test the behavior of how this flag affects signals and had several reports from people who ran this on various Unix boxes, confirming that Linux seems to be unique on the way this is handled. The way NODEFER affects signals on other Unix boxes is as follows: 1) If NODEFER is set, other signals in sa_mask are still blocked. 2) If NODEFER is set and the signal is in sa_mask, then the signal is still blocked. (Note: this is the behavior of all tested but Linux _and_ NetBSD 2.0 *). The way NODEFER affects signals on Linux: 1) If NODEFER is set, other signals are _not_ blocked regardless of sa_mask (Even NetBSD doesn't do this). 2) If NODEFER is set and the signal is in sa_mask, then the signal being handled is not blocked. The patch converts signal handling in all current Linux architectures to the way most Unix boxes work. Unix boxes that were tested: DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU 3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX. * NetBSD was the only other Unix to behave like Linux on point #2. The main concern was brought up by point #1 which even NetBSD isn't like Linux. So with this patch, we leave NetBSD as the lonely one that behaves differently here with #2. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 04:35:49 +0000