aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/au1000
AgeCommit message (Collapse)Author
2008-04-28[MIPS] Pb1200/DBAu1200: move platform code to its proper placeSergei Shtylyov
Since both the IDE interface and SMC 91C111 Ethernet chip are on-board devices, not SOC devices, move the platform device registration form the common to the board specific code. While at it, remove semicolon (which didn't break compilation only by chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming: - change 'au1200_ide0_' variable name prefix to the mere 'ide_'; - change 'smc91x_' variable name prefix to 'smc91c111_' since that's the name of the chip used on the boards; - drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet on-board devices; - change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of the macros describing the Ethernet chip for consistency with the IDE macros; - change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is indeed a shift count) in the names of the macros describing the IDE interface. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Pb1200: do register SMC 91C111Sergei Shtylyov
Pb1200 does have SMC 91C111 Ethernet chip on board but the platform code did not register it, so one couldn't mount NFS... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] DBAu1200: fix bad SMC 91C111 resource sizeSergei Shtylyov
The on-board SMC 91C111 chip only decodes 16 bytes of memory (obviously, it can not decode a whole megabyte starting from address 0x19000300). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Alchemy: move UART platform code to its proper placeSergei Shtylyov
Move the code registering the Alchemy UART platform devices from drivers/serial/ to its proper place, into the Alchemy platform code. Fix the related Kconfig entry, while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Alchemy: kill useless #include's, #define's and extern'sSergei Shtylyov
Go thru the Alchemy code and hunt down every unneeded #include, #define, and extern (some of which refer to already long dead functions). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Alchemy: kill useless time variablesSergei Shtylyov
Since the commit 91a2fcc88634663e9e13dcdfad0e4a860e64aeee ([MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers) removed the Alchemy specific timer handler, 'r4k_offset' and 'r4k_cur' variables became practically useless, so get rid of them at last, renaming cal_r4off() function into calc_clock() and making it return CPU frequency. Also, make 'no_au1xxx_32khz' variable static... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Alchemy: don't unmask timer IRQ earlySergei Shtylyov
Defer the unmasking of the count/compare interrupt (IRQ5) till the clockevent driver initialization: - only enable the cascaded IRQs 0 thru 4 in arch_init_irq(); kill the ALLINTS macro -- this change is blessed by AMD as I saw it in their own patch; :-) - do not force IRQ5 enabled in plat_time_init() if PM is enabled and there's no 32 KHz crystal. Update the copyrights (taking into account my prior changes), also removing Pete Popov's old email... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-17Pb1200/DBAu1200: fix bad IDE resource sizeSergei Shtylyov
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-01[MIPS] XSS1500: Fix compilationFlorian Fainelli
This patch fixes the compilation of the Au1000 XSS1500 board setup and irqmap code. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Alchemy: work around clock misdetection on early Au1000Sergei Shtylyov
Work around the CPU clock miscalculation on Au1000DA/HA/HB due the sys_cpupll register being write-only, i.e. actually do what the comment before cal_r4off() function advertised for years but the code failed at. This is achieved by just giving user a chance to define the clock explicitly in the board config. via CONFIG_SOC_AU1000_FREQUENCY option, defaulting to 396 MHz if the option is not given... The patch is based on the AMD's big unpublished patch, the issue seems to be an undocumented errata (or feature :-)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12[MIPS] Alchemy: Fix ids in Alchemy db dma device tableWolfgang Ocker
0 is a valid device id (DSCR_CMD0_UART0_TX), so we can't use it to mark an empty entry in the device table. Use ~0 instead and search for id ~0 when looking for a free entry. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-06Remove inclusions of <linux/autoconf.h>Ralf Baechle
Nothing should ever include this file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Mike Frysinger" <vapier.adi@gmail.com> Acked-by: "Bryan Wu" <cooloney.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03arch/mips/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-29[MIPS] MTX-1: Add GPIO system buttonFlorian Fainelli
This patch adds support for the GPIO connected system button on the MTX-1 boards. Default configuration is updated accordingly. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] clean up au1xxx_irqmap.c include filesYoichi Yuasa
Clean up au1xxx_irqmap.c include files. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] remove unused mips_machtypeYoichi Yuasa
Removed unused mips_machtype. These are only set but not used. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] Converting most array size calculations to use ARRAY_SIZE().Alejandro Martinez Ruiz
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-27i2c-au1550: Convert to platform driverManuel Lauss
Convert the i2c-au1550 bus driver to platform driver, and register a platform device for the Alchemy Db/Pb series of boards. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-07[MIPS] Alchemy: Fix use of __init code bug exposed by modpost warningSergei Shtylyov
WARNING: vmlinux.o(.text+0x1ca608): Section mismatch: reference to .init.text: add_wired_entry (between 'config_access' and 'config_read') by refactoring the code calling add_wired_entry() from config_access() to a separate function which is called from aau1x_pci_setup(). While at it: - make some unnecassarily global variables 'static'; - fix the letter case, whitespace, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-14[MIPS] Alchemy: fix off by two error in __fixup_bigphys_addr()Sergei Shtylyov
the PCI specific code in this function doesn't check for the address range being under the upper bound of the PCI memory window correctly -- fix this, somewhat beautifying the code around the check, while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-14[MIPS] Alchemy: fix PCI resource conflictSergei Shtylyov
... by getting the PCI resources back into the 32-bit range -- there's no need therefore for CONFIG_RESOURCES_64BIT either. This makes Alchemy PCI work again while currently the kernel skips the bus scan. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-06[MIPS] Alchemy: fix IRQ basesSergei Shtylyov
Do what the commits commits f3e8d1da389fe2e514e31f6e93c690c8e1243849 and 9d360ab4a7568a8d177280f651a8a772ae52b9b9 failed to achieve -- actually convert the Alchemy code to irq_cpu. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-06[MIPS] Alchemy: replace ffs() with __ffs()Sergei Shtylyov
Fix havoc wrought by commit 56f621c7f6f735311eed3f36858b402013023c18 -- au_ffs() and ffs() are equivalent, that patch should have just replaced one with another. Now replace ffs() with __ffs() which returns an unbiased bit number. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Only build r4k clocksource for systems that work ok with it.Ralf Baechle
In particular as-is it's not suited for multicore and mutiprocessors systems where there is on guarantee that the counter are synchronized or running from the same clock at all. This broke Sibyte and probably others since the "[MIPS] Handle R4000/R4400 mfc0 from count register." commit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-02[MIPS] mtx-1: Enable -Werror.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-02[MIPS] mtx-1: Remove unused mtx1_sys_btn.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-02[MIPS] Pb1200: Enable -Werror.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-02[MIPS] Pb1200: Fix warning.Ralf Baechle
arch/mips/au1000/pb1200/irqmap.c:101: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result And while at it a few coding style cleanups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-02[MIPS] Pb1200: Fix warning.Ralf Baechle
arch/mips/au1000/pb1200/board_setup.c:71: warning: unused variable 'pin_func' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] Alchemy: Register platform devicesFlorian Fainelli
This patch separates the platform devices registration for the MTX-1 specific devices: GPIO leds and watchdog. [Minor fixup and formatting change -- Ralf] Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] Alchemy: Convert from plat_timer_setup to plat_time_init.Ralf Baechle
The old plat_timer_setup hook is no longer getting called so the Alchemy time initialization was getting skipped. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] Alchemy: micro-optimizatize time code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] Alchemy: Nuke homebrew setup_irq(), it's broken and unnecessary.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18[MIPS] time: Move R4000 clockevent device code to separate configurable fileRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: replace last remaining instance of au_ffs with ffs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: Reformat PM code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: Fix build by conversion to irq_cpu.c.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-16[MIPS] Alchemy: Get rid of au1xxx_irq_map_t.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-16[MIPS] Alchemy: Get rid of au_ffs().Ralf Baechle
It was plain a bad idea ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-16[MIPS] Alchemy: cleanup interrupt code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-15add new prom.h for AU1x00Yoichi Yuasa
Add new prom.h for AU1x00. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15update AU1000 get_ethernet_addr()Yoichi Yuasa
Update AU1000 get_ethernet_addr(). Three functions were brought together in one. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11[MIPS] checkfiles: Fix "need space after that ','" errors.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Fix "no space between function name and open parenthesis" warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Implement clockevents for R4000-style cp0 count/compare interruptRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Deforest the function pointer jungle in the time code.Ralf Baechle
Hard to follow who is pointing what to where and why so it's simply getting in the way of the time code renovation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] ARC: Get rid of mips_machgroupRalf Baechle
This has not been any serious user of this ill conceived thing since the original invention in like '95. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-02 04:43:54 +0000