aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)Author
2009-01-30MIPS: RB532: Add set_type() function to IRQ struct.Phil Sutter
Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources; add defines to make this clear when addressing them later in code. The mapped GPIOs support triggering on either level high or low. To achieve this, the set_type() function calls rb532_gpio_set_ilevel() for interrupts of the above mentioned group. As there is no way to alter the triggering characteristics of the other interrupts, accept level triggering on status high only. (This is just a guess; but as the system boots fine and interrupt-driven devices (e.g. serial console) work with no implications, it seems to be right.) To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the interrupt status bit of the corresponding GPIO pin). This is done inside rb532_disable_irq(). After applying these changes I could undo most of my former "fixes" to pata-rb532-cf. Particularly all interrupt handling can be done generically via set_irq_type() as it was before. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30MIPS: Fix a typo in watchpoint register structure.David Daney
This fixes the ptrace ABI for watch registers, and should allow 64bit kernels to use the watch register support. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30MIPS: TXx9: Add support for TX4939 internal RTCAtsushi Nemoto
Add platform support to use rtc-tx4939 driver. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30MIPS: Add return value checks to user_termio_to_kernel_termios()Ralf Baechle
And while at it, convert all functions from macros to inline functions for sanity. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30MIPS: atomic_*(): Change type of intermediate variables.Ralf Baechle
This shaves of 1912 bytes of an IP27 defconfig kernel and avoids unexpected overflow behaviour in atomic_sub_if_positive. Apply the same changes to the atomic64_* functions for consistency. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-14byteorder: make swab.h include asm/swab.h like a regular headerHarvey Harrison
Add swab.h to kbuild.asm and remove the individual entries from each arch, mark as unifdef as some arches have some kernel-only bits inside. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-11MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss
Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
2009-01-11MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss
Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss
Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: move calc_clock function.Manuel Lauss
Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: make cp0 counter clocksource/event usable as fallback.Manuel Lauss
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: remove cpu_table.Manuel Lauss
Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
2009-01-11MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss
There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: update core interrupt code.Manuel Lauss
This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
2009-01-11MIPS: Adjust the dma-common.c platform hooks.David Daney
We add a dev parameter to plat_unmap_dma_mem(), and hooks for plat_dma_supported() and plat_extra_sync_for_device() which should be nop changes for all existing targets. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Cavium OCTEON multiplier state preservation.David Daney
For OCTEON, implement a save and restore of the multiplier state across context switches. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.David Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.cDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON cop2/cvmseg state entries to processor.h.David Daney
Add in the cop2 and cvmseg state info to the known proc reg data for Cavium so that it can be tracked, saved, restored. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Modify core io.h macros to account for the Octeon Errata Core-301.David Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Hook Cavium OCTEON cache init into cache.cDavid Daney
Follow precedent of other boards, and hook-up the CPU specific cache init. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON processor constants and CPU probe.David Daney
Add OCTEON constants to asm/cpu.h and asm/module.h. Add probe function for Cavium OCTEON CPUs and hook it up. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Override assembler target architecture for octeon.David Daney
Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific register definitions to mipsregs.hDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: For Cavium OCTEON handle hazards as per the R10000 handling.David Daney
For Cavium CPU, we treat the same as R10000, in that all hazards are dealt with in hardware. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.David Daney
These are the rest of the new files needed to add OCTEON processor support to the Linux kernel. Other than Makefile and Kconfig which should be obvious, we have: csrc-octeon.c -- Clock source driver for OCTEON. dma-octeon.c -- Helper functions for mapping DMA memory. flash_setup.c -- Register on-board flash with the MTD subsystem. octeon-irq.c -- OCTEON interrupt controller managment. octeon-memcpy.S -- Optimized memcpy() implementation. serial.c -- Register 8250 platform driver and early console. setup.c -- Early architecture initialization. smp.c -- OCTEON SMP support. octeon_switch.S -- Scheduler context switch for OCTEON. c-octeon.c -- OCTEON cache controller support. cex-oct.S -- OCTEON cache exception handler. asm/mach-cavium-octeon/*.h -- Architecture include files. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/Kconfig create mode 100644 arch/mips/cavium-octeon/Makefile create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c create mode 100644 arch/mips/cavium-octeon/dma-octeon.c create mode 100644 arch/mips/cavium-octeon/flash_setup.c create mode 100644 arch/mips/cavium-octeon/octeon-irq.c create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S create mode 100644 arch/mips/cavium-octeon/serial.c create mode 100644 arch/mips/cavium-octeon/setup.c create mode 100644 arch/mips/cavium-octeon/smp.c create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h create mode 100644 arch/mips/include/asm/octeon/octeon.h create mode 100644 arch/mips/kernel/octeon_switch.S create mode 100644 arch/mips/mm/c-octeon.c create mode 100644 arch/mips/mm/cex-oct.S
2009-01-11MIPS: Add Cavium OCTEON processor support files to ↵David Daney
arch/mips/cavium-octeon/executive and asm/octeon. These files are used to coordinate resource sharing between all of the programs running on the OCTEON SOC. The OCTEON processor has many CPU cores (current parts have up to 16, but more are possible). It also has a variety of on-chip hardware blocks for things like network acceleration, encryption and RAID. One typical configuration is to run Linux on several of the CPU cores, and other dedicated applications on the other cores. Resource allocation between the various programs running on the system (Linux kernel and other dedicated applications) needs to be coordinated. The code we use to do this we call the 'executive'. All of this resource allocation and sharing code is gathered together in the executive directory. Included in the patch set are the following files: cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation. All memory used by the Linux kernel is obtained here at boot time. cvmx-l2c.c -- Coordinates operations on the shared level 2 cache. octeon-model.c -- Probes chip capabilities and version. The corresponding headers are in asm/octeon. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/executive/Makefile create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h create mode 100644 arch/mips/include/asm/octeon/cvmx.h create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h create mode 100644 arch/mips/include/asm/octeon/octeon-model.h
2009-01-11MIPS: Add Cavium OCTEON processor CSR definitionsDavid Daney
Here we define the addresses and bit-fields of the Configuration and Status Registers (CSRs) for some of the hardware functional units on the OCTEON SOC. Definitions are needed for: CIU -- Central Interrupt Unit. GPIO -- General Purpose Input Output. IOB -- Input / Output {Busing,Bridge}. IPD -- Input Packet Data unit. L2C -- Level-2 Cache controller. L2D -- Level-2 Data cache. L2T -- Level-2 cache Tag. LED -- Light Emitting Diode controller. MIO -- Miscellaneous Input / Output. POW -- Packet Order / Work unit. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-06mips: introduce asm/swab.hHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06atomic_t: unify all arch definitionsMatthew Wilcox
The atomic_t type cannot currently be used in some header files because it would create an include loop with asm/atomic.h. Move the type definition to linux/types.h to break the loop. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03Merge branch 'master' of ↵Mike Travis
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-30Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-12-26cpumask: Mips: Introduce cpumask_of_{node,pcibus} to replace ↵Rusty Russell
{node,pcibus}_to_cpumask Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ralf Baechle <ralf@linux-mips.org>
2008-12-22MIPS: MIPS64R2: Fix buggy __arch_swab64David Daney
The way the code is written it was assuming dshd has the function of a hypothetical dshw instruction ... Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-22MIPS: Fix preprocessor warnings flaged by GCC 4.4David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-16Merge branch 'master' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-ingo into cpus4096
2008-12-16Merge branch 'linus' into cpus4096Ingo Molnar
2008-12-13Merge ../linux-2.6-x86Rusty Russell
Conflicts: arch/x86/kernel/io_apic.c kernel/sched.c kernel/sched_stats.h
2008-12-13cpumask: make irq_set_affinity() take a const struct cpumaskRusty Russell
Impact: change existing irq_chip API Not much point with gentle transition here: the struct irq_chip's setaffinity method signature needs to change. Fortunately, not widely used code, but hits a few architectures. Note: In irq_select_affinity() I save a temporary in by mangling irq_desc[irq].affinity directly. Ingo, does this break anything? (Folded in fix from KOSAKI Motohiro) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: jeremy@xensource.com Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13cpumask: centralize cpu_online_map and cpu_possible_mapRusty Russell
Impact: cleanup Each SMP arch defines these themselves. Move them to a central location. Twists: 1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a CONFIG_INIT_ALL_POSSIBLE for this rather than break them. 2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'. Those archs simply have phys_cpu_present_map replaced everywhere. 3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky so I just manipulate them both in sync. 4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map' declarations. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Tony Luck <tony.luck@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Mike Travis <travis@sgi.com> Cc: ink@jurassic.park.msu.ru Cc: rmk@arm.linux.org.uk Cc: starvik@axis.com Cc: tony.luck@intel.com Cc: takata@linux-m32r.org Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: paulus@samba.org Cc: schwidefsky@de.ibm.com Cc: lethal@linux-sh.org Cc: wli@holomorphy.com Cc: davem@davemloft.net Cc: jdike@addtoit.com Cc: mingo@redhat.com
2008-12-12MIPS: Use EI/DI for MIPS R2.David Daney
For MIPS R2, use the EI and DI instructions to enable and disable interrupts. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12Merge branch 'sched/core' into cpus4096Ingo Molnar
Conflicts: include/linux/ftrace.h kernel/sched.c
2008-12-09MIPS: Better than nothing implementation of PCI mmap to fix X.Ralf Baechle
Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-02Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: kernel/trace/ring_buffer.c
2008-11-30remove __ARCH_WANT_COMPAT_SYS_PTRACEChristoph Hellwig
All architectures now use the generic compat_sys_ptrace, as should every new architecture that needs 32bit compat (if we'll ever get another). Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also kill a comment about __ARCH_SYS_PTRACE that was added after __ARCH_SYS_PTRACE was already gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-26sched: convert struct root_domain to cpumask_var_t, fixIngo Molnar
Mathieu Desnoyers reported this build failure on powerpc: kernel/sched.c: In function 'sd_init_NODE': kernel/sched.c:7319: error: non-static initialization of a flexible array member kernel/sched.c:7319: error: (near initialization for '(anonymous)') this happens because .span changed to cpumask_var_t, hence the static CPU_MASK_NONE initializers in the SD_*_INIT templates are not type-correct anymore. Remove them, as they default to empty anyway. Also remove them from IA64, MIPS and SH. Reported-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24MIPS: Make BUG() __noreturn.David Daney
Often we do things like put BUG() in the default clause of a case statement. Since it was not declared __noreturn, this could sometimes lead to bogus compiler warnings that variables were used uninitialized. There is a small problem in that we have to put a magic while(1); loop to fool GCC into really thinking it is noreturn. This makes the new BUG() function 3 instructions long instead of just 1, but I think it is worth it as it is now unnecessary to do extra work to silence the 'used uninitialized' warnings. I also re-wrote BUG_ON so that if it is given a constant condition, it just does BUG() instead of loading a constant value in to a register and testing it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: RB532: Provide functions for gpio configurationPhil Sutter
As gpiolib doesn't support pin multiplexing, it provides no way to access the GPIOFUNC register. Also there is no support for setting interrupt status and level. These functions provide access to them and are needed by the CompactFlash driver. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: RB532: GPIO register offsets are relative to GPIOBASEFlorian Fainelli
This patch fixes the wrong use of GPIO register offsets in devices.c. To avoid further problems, use gpio_get_value to return the NAND status instead of our own expanded code. Also define the zero offset of the alternate function register to allow consistent access. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 09:38:33 +0000