aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/pci
AgeCommit message (Collapse)Author
2008-12-09MIPS: Better than nothing implementation of PCI mmap to fix X.Ralf Baechle
Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dirShinya Kuribayashi
We'll put all EMMA related headers there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Fix build errorAdrian Bunk
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h> This patch fixes the following compile error caused by commit 606a083b1e1a357cb66454e4581b80f1a67d8368 (MIPS: RB532: Cleanup the headers again): <-- snip --> ... CC arch/mips/pci/fixup-rc32434.o arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq': arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function) arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.) make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1 <-- snip --> A virtually identical patch was also submitted by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Kill unused <asm/debug.h> inclusionsShinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: PCI: Scan busses when they are registeredAurelien Jarno
The patch below changes register_pci_controller() such that controllers being added after pcibios_init() has run are be scanned immediately. This is needed for example by the BCM47xx PCI controller, which is located on the SSB bus, which is now initialized after the PCI subsystem. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27[MIPS] BCM47xx: Fix build error due to missing PCI functionsAurelien Jarno
This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27[MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error.Ralf Baechle
pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26[MIPS] IP27: Export symbol pcibus_to_node to modules.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: PCI error handlingAtsushi Nemoto
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Thu, 24 Jul 2008 00:25:16 +0900 Subject: [PATCH] txx9: PCI error handling Add more control and detailed report on PCI error interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Add some pci optionsAtsushi Nemoto
Add pci options for backplane type, clock selection, error handling, timeout values. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] Introduce pcibios_plat_setupAtsushi Nemoto
Introduce pcibios_plat_setup for platform-specific pcibios_setup. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: PCI fixes for tx3927/tx4927Atsushi Nemoto
* Fix tx3927 pci ops for Type-1 configuration * Fix abort checking of tx3927 pci ops * Flush write buffer to avoid spurious PCI error interrupt * Add a quirk for FPCIB backplane Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20[MIPS] Routerboard 532: Support for base systemRalf Baechle
Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20[MIPS] PCI: Make the pcibios_max_latency variable staticDmitri Vorobiev
The pcibios_max_latency variable is needlessly defined global, and this patch makes it static. Build-tested using malta_defconfig. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove mips_machtype for LASAT machinesThomas Bogendoerfer
This is the LASAT part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] cmbvr4133: Remove supportYoichi Yuasa
It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Make single kernel can support multiple boardsAtsushi Nemoto
Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Reorganize PCI codeAtsushi Nemoto
Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Reorganize codeAtsushi Nemoto
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Atlas: Remove support code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] rbtx4927: misc cleanupsAtsushi Nemoto
* Merge tx4927_pci.h into tx4927.h * Kill (broken) external PCI clock frequency reporting * Kill unnecessary wbflush() * Kill unnecessary includes * Kill debug garbages Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Declare some pci variables in header fileAtsushi Nemoto
Declare pci_probe_only, etc. in asm-mips/pci.h file. This will fix some sparse warnings. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Namespace clean-up in arch/mips/pci/pci.cDmitri Vorobiev
The following symbols hose_head hose_tail are needlessly defined global in arch/mips/pci/pci.c, and this patch makes them static. The variable pci_isa_hose is not used, and is removed by this patch. Spotted by namespacecheck. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Enable FAST-20 for onboard scsiThomas Bogendoerfer
Both onboard controller of the O2 support FAST-20 transfer speeds, but the bit, which signals that to the aic driver, isn't set. Instead of adding detection code to the scsi driver, we just fake the missing bit in the PCI config space of the scsi chips. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove obsolete isa_slot_offsetMaciej W. Rozycki
The isa_slot_offset variable and its __ISA_IO_base macro is not used anywhere anymore. It does not look like a decent interface per today's standards either. Remove both including all places of initialization. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16[MIPS] Vr41xx: Initialize PCI io_map_baseYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16[MIPS] SB1250: Initialize io_map_baseMaciej W. Rozycki
Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-05[MIPS] IP27: misc fixesThomas Bogendoerfer
- fix PCI interrupt assignment by emulating ioc3 interrupt pin register - use pci_probe_only mode - select correct page size in bridge - remove no longer needed ioc3_sio_init() code [Ralf: Fix for 64kB or larger pagesizes] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-05-12[MIPS] Alchemy PCI code style cleanupSergei Shtylyov
Fix 15 errors and 4 warnings given by checkpatch.pl: - space between the asterisk and variable name; - space after opening and before closing parentheses; - leading spaces instead of tabs; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - line over 80 characters. In addition to these changes, also do the following: - combine the nested 'if' statements into one when possible; - remove needless parentheses; - add missing and remove excess spaces between operator and its operands; - fix printk() format specifiers mismatching the argument types; - put the function's result type and name/parameters on the same line; - insert missing and remove excess new lines; - properly indent multi-line expressions; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line; - fix typos, capitalize acronyms, etc. in the comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] Alchemy: kill useless #include's, #define's and extern'sSergei Shtylyov
Go thru the Alchemy code and hunt down every unneeded #include, #define, and extern (some of which refer to already long dead functions). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28[MIPS] replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] BCM1480: Fix PCI/HT IO accessThomas Bogendoerfer
- removed check for enable HT-PCI bridges, because some CFE version init only the needed one and scanning works even with disabled HT links - implemented I/O access behind HT PCI busses - fixed pci_map for IO resource behind PCI bridge Tested with E100 and Tulip driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12[MIPS] BCM1480: Init pci controller io_map_baseThomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12[MIPS] Fix loads of section missmatchesRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19[MIPS] PCI: Coding style fixes for pcibios_enable_resources.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19[MIPS] PCI: Port i386 PCI fixes.Ralf Baechle
The MIPS version of pcibios_enalbe_resources did not have the fixes from ed6d14f9760857c745206c978b80352fc09cfd19 yet which under circumstances similar to x86 might result in failures. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] BCM1480: Use constants instead of magic numbers in PCI code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-15[MIPS] Cobalt: Fix ethernet interrupts for RaQ1Thomas Bogendoerfer
RAQ1 uses the same interrupt routing as Qube2. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-07[MIPS] Fix IP32 breakageThomas Bogendoerfer
- suppress master aborts during config read - set io_map_base - only fixup end of iomem resource to avoid failing request_resource in serial driver - killed useless setting of crime_int bit, which caused wrong interrupts - use physcial address for serial port platform device and let 8250 driver do the ioremap Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-07[MIPS] Alchemy: Fix use of __init code bug exposed by modpost warningSergei Shtylyov
WARNING: vmlinux.o(.text+0x1ca608): Section mismatch: reference to .init.text: add_wired_entry (between 'config_access' and 'config_read') by refactoring the code calling add_wired_entry() from config_access() to a separate function which is called from aau1x_pci_setup(). While at it: - make some unnecassarily global variables 'static'; - fix the letter case, whitespace, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-14[MIPS] PCI: Make pcibios_fixup_device_resources ignore legacy resources.Ralf Baechle
There might be other reasons why a resource might be marked as fixed such as a PCI UART holding the system console but until we use IORESOURCE_PCI_FIXED that way also this will work. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-06[MIPS] BCM1480: Fix interrupt routing, take 2.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-03[MIPS] BCM1480: Fix interrupt routing.Ralf Baechle
The old code did did only work as long as CFE and the kernel were using the same interrupt numbering ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Lasat: Fix overlap of interrupt number ranges.Yoichi Yuasa
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1Thomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHzRoel Kluin
iounmap if pci clock is over 33MHz. Cosmetic because the iomap() in this case is just a bit of address magic. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] tb0219: Update copyright message.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 20:12:08 +0000