aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/pci
AgeCommit message (Collapse)Author
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.Yoichi Yuasa
As per feature-removal-schedule.txt. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systemsMaciej W. Rozycki
It was obesrved that at least one older PCI card predating the requirement for the TRDY signal to respond within 16 clock ticks actually does not meet this rule nor even the power-on defaults of the PCI bridges found in development systems built around the Broadcom SiByte SOCs. Here is a patch that bumps up the timeout to the highest finite value supported by these chips, which is 255 clock ticks. The bridges affected are the SiByte SOC itself and the SP1011. This change does not effectively affect systems only having PCI option cards installed that meet the TRDY requirement of the current PCI spec. The rule was introduced with PCI 2.1, so any older card may make the system affected. If this is the case, performance of the system will suffer in return for the card working at all. If this is a concern, then the solution is not to use such cards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-09-27[MIPS] Remove EV96100 as previously announced.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] IP27: Delete useless declaration of allocate_irqno().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Atlas: update interrupt handlingMaciej W. Rozycki
The following change updates the Atlas interrupt handling to match that of Malta. Tested with a 5Kc and a 34Kf successfully. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix for pci config_access on alchemy au1x000Alexander Bigga
I've encountered a serious problem with PCI config space access on Au1x000 platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine. So I was looking for the differences: Symptoms: - no PCI-device is seen on bootup though two or three cards are present - lspci output is empty - OR: lspci shows 20 times the same device (- OR: in some slot-configurations it worked anyhow) System(s): 1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500 with backplane for three PCI-devices) 2. platform with Au1550 and two PCI-devices (custom board) Debugging: I digged down to the config_access() of the au1xxx-processors in arch/mips/pci/ops-au1000.c and switched on DEBUG. The code of config_access() seems to be almost the same as of the 2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0) once on booting is different. That's of course not forbidden. But the alignment seems to be wrong. In my case, I received: 2.4.31: pci_cfg_vm->addr = c0000000 2.6.18-rc5: pci_cfg_vm->addr = c0101000 To make it short: With 2.6.x it fails on the first config-access with: "PCI ERR detected: status 83a00356". Fixup: My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I found in gitweb). Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works fine. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix EV64120 PCI fixup in MakefileYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Don't include obsolete <linux/config.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits) [MIPS] Add missing backslashes to macro definitions. [MIPS] Death list of board support to be removed after 2.6.18. [MIPS] Remove BSD and Sys V compat data types. [MIPS] ioc3.h: Uses u8, so include <linux/types.h>. [MIPS] 74K: Assume it will also have an AR bit in config7 [MIPS] Treat CPUs with AR bit as physically indexed. [MIPS] Oprofile: Support VSMP on 34K. [MIPS] MIPS32/MIPS64 S-cache fix and cleanup [MIPS] excite: PCI makefile needs to use += if it wants a chance to work. [MIPS] excite: plat_setup -> plat_mem_setup. [MIPS] au1xxx: export dbdma functions [MIPS] au1xxx: dbdma, no sleeping under spin_lock [MIPS] au1xxx: fix PSC_SMBTXRX_RSR. [MIPS] Early printk for IP27. [MIPS] Fix handling of 0 length I & D caches. [MIPS] Typo fixes. [MIPS] MIPS32/MIPS64 secondary cache management [MIPS] Fix FIXADDR_TOP for TX39/TX49. [MIPS] Remove first timer interrupt setup in wrppmc_timer_setup() [MIPS] Fix configuration of R2 CPU features and multithreading. ...
2006-06-29[MIPS] Remove BSD and Sys V compat data types.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29[MIPS] excite: PCI makefile needs to use += if it wants a chance to work.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-27[PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.Ralf Baechle
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins boarddmitry pervushin
Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.Thomas Bogendoerfer
Added support for RM200C machines with big endian firmware Added support for RM200-C40 (R5000 support) Signed-off-by: Florian Lohoff <flo@rfc822.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove support for NEC DDB5476.Ralf Baechle
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove support for NEC DDB5074.Ralf Baechle
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove unused function alloc_pci_controller.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Extract pci_ops into separate file.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Use symbolic constants instead of magic numbers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] C99-ify struct resource initialization.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Wind River 4KC PPMC Eval Board SupportMark.Zhan
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board. Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21[MIPS] War on whitespace: cleanup initial spaces followed by tabs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-09[MIPS] Momentum: Resurrect after things were moved around a while ago.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix Cobalt PCI cache line sizesPeter Horton
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] BCM1480: Cleanup debug code left behind in the PCI driver.Mark Mason
Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] BCM1125 PCI fixesMark Mason
Make BCM1125 targets to link again. Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10Update Yoichi Yuasa's email address.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17[MIPS] TX3927: Try to glue the PCI code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17[MIPS] JMR3927: It's ops-tx3927.o not ops-jmr3927.oRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17[MIPS] JMR3927: Fix syntax error.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29pci-expmem-hackAndrew Isaacson
CFE 1.2.5 and earlier fails to turn on the ExpMemEn bit in the PCIFeatureControl register, which means that DMA does not work beyond physical address 01_0000_0000, ergo to DRAM beyond 1GB. With ExpMemEn turned on, 01_0000_0000-0f_ffff_ffff is mapped, so DMA works for up to 61 GB of DRAM. Will be fixed in CFE 1.2.6 (yet to be released). Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29BCM1480 HT supportAndrew Isaacson
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Support for the BCM1480 on-chip PCI-X bridge.Andrew Isaacson
Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Convert the remaining SPIN_LOCK_UNLOCKED instances to DEFINE_SPINLOCK.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Define pcibus_to_node() for IP27.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Support for Toshiba's RBHMA4500 eval board for the TX4938.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Philips PNX8550 support: MIPS32-like core with 2 Trimedias on it.Pete Popov
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29In pcibios_enable_resources go back to handling all PCI_NUM_RESOURCESRalf Baechle
resources. We tried previous but ran into problems ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Brian Murphy says:Thiemo Seufer
this fixes Lasat pci to work with multi-function devices by assigning the correct values based on pin number (instead of ignoring them). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29Code cleanup, thanks Brian Murphy.Thiemo Seufer
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thiemo Seufer <ths@networkno.de>
2005-10-29Arrested for multiple offences of header file inclusion.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Moved irq_tab_alchemy to the board specific irqmap.c files.Pete Popov
Cleaned up a to of warnings in dbdma.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29No barrier needed on au1x.Pete Popov
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Comment correction after further investigation of issue.Pete Popov
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Resurrect Cobalt support for 2.6.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 18:35:28 +0000