aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/pci
AgeCommit message (Collapse)Author
2008-01-07[MIPS] Fix IP32 breakageThomas Bogendoerfer
- suppress master aborts during config read - set io_map_base - only fixup end of iomem resource to avoid failing request_resource in serial driver - killed useless setting of crime_int bit, which caused wrong interrupts - use physcial address for serial port platform device and let 8250 driver do the ioremap Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-07[MIPS] Alchemy: Fix use of __init code bug exposed by modpost warningSergei Shtylyov
WARNING: vmlinux.o(.text+0x1ca608): Section mismatch: reference to .init.text: add_wired_entry (between 'config_access' and 'config_read') by refactoring the code calling add_wired_entry() from config_access() to a separate function which is called from aau1x_pci_setup(). While at it: - make some unnecassarily global variables 'static'; - fix the letter case, whitespace, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-14[MIPS] PCI: Make pcibios_fixup_device_resources ignore legacy resources.Ralf Baechle
There might be other reasons why a resource might be marked as fixed such as a PCI UART holding the system console but until we use IORESOURCE_PCI_FIXED that way also this will work. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-06[MIPS] BCM1480: Fix interrupt routing, take 2.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-03[MIPS] BCM1480: Fix interrupt routing.Ralf Baechle
The old code did did only work as long as CFE and the kernel were using the same interrupt numbering ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Lasat: Fix overlap of interrupt number ranges.Yoichi Yuasa
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1Thomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHzRoel Kluin
iounmap if pci clock is over 33MHz. Cosmetic because the iomap() in this case is just a bit of address magic. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29[MIPS] tb0219: Update copyright message.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29Author: Ralf Baechle <ralf@linux-mips.org>Ralf Baechle
[MIPS] MSP71xx: Fix bitrot. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-17spin_lock_unlocked cleanupsRoel Kluin
Replace some SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[MIPS] Lasat: Fix build by conversion to irq_cpu.c.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] checkfiles: Fix "need space after that ','" errors.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Fix "no space between function name and open parenthesis" warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Allow hardwiring of the CPU type to a single type for optimization.Ralf Baechle
This saves a few k on systems which only ever ship with a single CPU type. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.Yoichi Yuasa
These PCI definitions are only used in arch/mips/pci/fixup-cobalt.c. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Add GT641xx IRQ routines.Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Add back support for LASAT platformsBrian Murphy
Signed-off-by: Brian Murphy <brian@murphy.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] IP32: Fix fatal typo in address computation.Giuseppe Sacco
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-05[MIPS] IP32: Enable PCI bridgesGiuseppe Sacco
Fixe MACE PCI addressing by adding the bus number parameter. Remove check of the used slot since every slot should be valid. Converted mkaddr from #define to inline function. Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-10[MIPS] PCI: Set need_domain_info if controller domain index is non-zero.Ralf Baechle
This fixes this little funny: bigsur:/proc/bus/pci# ls -l total 0 dr-xr-xr-x 2 root root 0 Aug 28 19:31 00 dr-xr-xr-x 2 root root 0 Aug 28 19:31 00 dr-xr-xr-x 2 root root 0 Aug 28 19:31 01 dr-xr-xr-x 2 root root 0 Aug 28 19:31 03 -r--r--r-- 1 root root 0 Aug 28 19:31 devices Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] HOTPLUG: Make register_pci_controller __devinit.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] PCI: Remove __devinit attribute from pcibios_fixup_bus.Ralf Baechle
Since 96bde06a2df1b363206d3cdef53134b84ff37813 several callers of pcibios_resource_to_bus are no longer marked __devinit resulting in a pile of modpost warnings if PCI && !HOTPLUG: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x15dde8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_map_rom_copy') WARNING: vmlinux.o(.text+0x15e140): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0x15f0cc): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'pci_bus_assign_resources') WARNING: vmlinux.o(.text+0x15f0f0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'pci_bus_assign_resources') WARNING: vmlinux.o(.text+0x15f114): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'pci_bus_assign_resources') WARNING: vmlinux.o(.text+0x15f138): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'pci_bus_assign_resources') WARNING: vmlinux.o(.text+0x15f438): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'pbus_size_mem') WARNING: vmlinux.o(.text+0x15f4f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'pbus_size_mem') Removing __devinit from pcibios_resource_to_bus make the same necessary for pcibios_fixup_device_resources as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] PCI: Remove __devinit attribute from pcibios_fixup_bus.Ralf Baechle
Since 96bde06a2df1b363206d3cdef53134b84ff37813 pcibios_fixup_bus's caller pci_scan_child_bus is no longer marked __devinit resulting in this modpost warning if PCI && !HOTPLUG: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x158b9c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bus_parented') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] DDB5477: Remove supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Remove Momentum Ocelot support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] rbtx4938: Fix warningsAtsushi Nemoto
linux/arch/mips/pci/fixup-tx4938.c:21:5: warning: symbol 'pci_get_irq' was not declared. Should it be static? linux/arch/mips/pci/fixup-tx4938.c:76: warning: passing argument 1 of 'pci_get_irq' discards qualifiers from pointer target type Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] 0 -> NULLYoann Padioleau
When comparing a pointer, it's clearer to compare it to NULL than to 0. Here is an excerpt of the semantic patch: @@ expression *E; @@ E == - 0 + NULL @@ expression *E; @@ E != - 0 + NULL Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: akpm@linux-foundation.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] rbtx4927: Fix some gcc warnings and a section mismatch.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-12[MIPS] Fix a sparse warning in arch/mips/pci/pci.cAtsushi Nemoto
Fixes this warning: arch/mips/pci/pci.c:284:18: warning: symbol 'dev' shadows an earlier one arch/mips/pci/pci.c:272:17: originally declared here Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-11PCI: remove pci_dac_dma_... APIsJan Beulich
Based on replies to a respective query, remove the pci_dac_dma_...() APIs (except for pci_dac_dma_supported() on Alpha, where this function is used in non-DAC PCI DMA code). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: David Miller <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[MIPS] Delete Ocelot 3 support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] remove LASAT Networks platforms supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] rbtx4938: Fix secondary PCIC and glue internal NICsAtsushi Nemoto
* Fix pci ops for secondary PCIC * Do not reserve 1MB for PCI MEM region (leave PCIBIOS_MIN_MEM zero) * Use platform_device to provide ethernet addresses for internal NICs. (background: TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way.) * Check return value of early_read_config_word() Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PMC MSP71xx PCI supportMarc St-Jean
Patch to add PCI support for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] New files for lemote fulong mini-PC supportSongmao Tian
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com> Signed-off-by: Songmao Tian <tiansm@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Remove Momenco Ocelot C supportFranck Bui-Huu
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/configs/ocelot_c_defconfig delete mode 100644 arch/mips/momentum/ocelot_c/Makefile delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c delete mode 100644 arch/mips/momentum/ocelot_c/irq.c delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h delete mode 100644 arch/mips/momentum/ocelot_c/platform.c delete mode 100644 arch/mips/momentum/ocelot_c/prom.c delete mode 100644 arch/mips/momentum/ocelot_c/reset.c delete mode 100644 arch/mips/momentum/ocelot_c/setup.c delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c delete mode 100644 arch/mips/pci/fixup-ocelot-c.c delete mode 100644 arch/mips/pci/pci-ocelot-c.c
2007-07-10[MIPS] PCI: Make dev pointer argument of pcibios_map_irq const.Ralf Baechle
This is to break the code of people who think they are supposed to scribble into the pci device structure - it's off limits. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] EV64120: Remove supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-01parse errors in ifdefsYoann Padioleau
Fix various bits of obviously-busted code which we're not happening to compile, due to ifdefs. Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jan Kara <jack@ucw.cz> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11[MIPS] Rework cobalt_board_idYoichi Yuasa
This patch has reworked cobalt_board_id. The cobalt_board_id is read from PCI config register. It should be in PCI routine. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11[MIPS] Add extern cobalt_board_idYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11[MIPS] Remove Momenco Jaguar ATX supportFranck Bui-Huu
It has some hackish code and it odd DMA results in the need to support old features in kernel code. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11[MIPS] Remove Momenco Ocelot G supportFranck Bui-Huu
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-04-27[MIPS] Register PCI host bridge resource earlierThomas Bogendoerfer
PCI based SNI RM machines have their EISA bus behind an Intel PCI/EISA bridge. So the PCI IO range must start at 0x0000. Changing that will break the PCI bus, because i8259.c already has registered it's IO addresses before the PCI bus gets initialized. Below is a patch, which will register the PCI host bridge resources inside register_pci_controller(). It also changes i8259.c to use insert_region(), because request_resource() will fail, if the IO space of the PIT hanging of the PCI host bridge (maybe passing the resource parent to init_i8259_irqs() is a cleaner fix for that). Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27[MIPS] JMR3927 cleanupAtsushi Nemoto
* Kill dead codes * Rearrange irq chip handlers * Minimize defconfig Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>