aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2006-09-27[MIPS] Reduce race between cpu_wait() and need_resched() checkingAtsushi Nemoto
If a thread became runnable between need_resched() and the WAIT instruction, switching to the thread will delay until a next interrupt. Some CPUs can execute the WAIT instruction with interrupt disabled, so we can get rid of this race on them (at least UP case). Original Patch by Atsushi with fixing up for MIPS Technology's cores by Ralf based on feedback from the RTL designers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Wire up set_robust_list(2) and get_robust_list(2)Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] SEAD defconfig build fixMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix for pci config_access on alchemy au1x000Alexander Bigga
I've encountered a serious problem with PCI config space access on Au1x000 platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine. So I was looking for the differences: Symptoms: - no PCI-device is seen on bootup though two or three cards are present - lspci output is empty - OR: lspci shows 20 times the same device (- OR: in some slot-configurations it worked anyhow) System(s): 1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500 with backplane for three PCI-devices) 2. platform with Au1550 and two PCI-devices (custom board) Debugging: I digged down to the config_access() of the au1xxx-processors in arch/mips/pci/ops-au1000.c and switched on DEBUG. The code of config_access() seems to be almost the same as of the 2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0) once on booting is different. That's of course not forbidden. But the alignment seems to be wrong. In my case, I received: 2.4.31: pci_cfg_vm->addr = c0000000 2.6.18-rc5: pci_cfg_vm->addr = c0101000 To make it short: With 2.6.x it fails on the first config-access with: "PCI ERR detected: status 83a00356". Fixup: My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I found in gitweb). Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works fine. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make prepare_frametrace() not clobber v0Atsushi Nemoto
Since lmo commit 323a380bf9e1a1679a774a2b053e3c1f2aa3f179 ("Simplify dump_stack()") made prepare_frametrace() always inlined, using $2 (v0) in __asm__ is not safe anymore. We can use $1 (at) instead. Also we should use "dla" instead of "la" for 64-bit kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Do not use drop_mmu_context to flusing other task's VIPT I-cache.Atsushi Nemoto
c-r4k.c and c-sb1.c use drop_mmu_context() to flush virtually tagged I-caches, but this does not work for flushing other task's icache. This is for example triggered by copy_to_user_page() called from ptrace(2). Use indexed flush for such cases. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: Fix setting of XTC.Elizabeth Oldham
XTC can only be set if VPA is clear, which it may not be. There is also the possibility of a back to back c0 register access hazard to take care of. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] SMTC Build fix.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix 32-bit kernel by replacing 64-bit-only code.Ralf Baechle
dclz() expects its 64-bit argument being passed as a single register but on 32-bit kernels it'll actually be in a register pair. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: When doing "select SMP" also select SMP's prerequesites or ...Ralf Baechle
... kconfig will do weird stuff. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] eXcite: Don't set SERIAL_RM9000.Ralf Baechle
The driver has not been merged yet so selecting it results in a warning message. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Retire flush_icache_page from mm use.Ralf Baechle
On the 34K the redundant cache operations were causing excessive stalls resulting in realtime code running on the second VPE missing its deadline. For all other platforms this patch is just a significant performance improvment as illustrated by below benchmark numbers. Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 25Kf 2.6.18-rc4 533 0.49 1.16 7.57 33.4 30.5 1.34 12.4 5497 17.K 54.K 25Kf 2.6.18-rc4-p 533 0.49 1.16 6.68 23.0 30.7 1.36 8.55 5030 16.K 48.K 4Kc 2.6.18-rc4 80 4.21 15.0 131. 289. 261. 16.5 258. 18.K 70.K 227K 4Kc 2.6.18-rc4-p 80 4.34 13.1 128. 285. 262. 18.2 258. 12.K 52.K 176K 34Kc 2.6.18-rc4 40 5.01 14.0 61.6 90.0 477. 17.9 94.7 29.K 108K 342K 34Kc 2.6.18-rc4-p 40 4.98 13.9 61.2 89.7 475. 17.6 93.7 8758 44.K 158K BCM1480 2.6.18-rc4 700 0.28 0.60 3.68 5.92 16.0 0.78 5.08 931. 3163 15.K BCM1480 2.6.18-rc4-p 700 0.28 0.61 3.65 5.85 16.0 0.79 5.20 395. 1464 8385 TX49-16K 2.6.18-rc3 197 0.73 2.41 19.0 37.8 82.9 2.94 17.5 4438 14.K 56.K TX49-16K 2.6.18-rc3-p 197 0.73 2.40 19.9 36.3 82.9 2.94 23.4 2577 9103 38.K TX49-32K 2.6.18-rc3 396 0.36 1.19 6.80 11.8 41.0 1.46 8.17 2738 8465 32.K TX49-32K 2.6.18-rc3-p 396 0.36 1.19 6.82 10.2 41.0 1.46 8.18 1330 4638 18.K Original patch by me with enhancements by Atsushi Nemoto. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2006-09-27[MIPS] Avoid double signal restarting.Ralf Baechle
In entry.S resume_userspace ... jal do_notify_resume form a loop through which the kernel will iterate as long as work is pending. If we iterate through this loop more than once with no signal pending for at least one but the last iteration we will take do the syscall restarting multiple times resulting in a syscall return prior to the the syscall instruction in userspace. This may happen when debugging a multithreaded program. Debugging and original fix by Maciej; extended to other ABIs by me. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: Initialise all writable bits in Cause register to zero.Chris Dearman
Recent 34Ks come out of reset with WP enabled on VPE 1 so we take an immediate exception when starting the second VPE. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix EV64120 PCI fixup in MakefileYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Add missing returns in signal code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] IRIX: Crapectopy.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Don't call try_to_freeze in do_signal & co.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Cleanup leftovers of ARCH_HAS_IRQ_PER_CPURalf Baechle
CONFIG_IRQ_PER_CPU now controls the IRQ_PER_CPU stuff. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Improve unwind_stack()Franck Bui-Huu
This patch allows unwind_stack() to return ra for leaf function. But it tries to detects cases where get_frame_info() wrongly consider nested function as a leaf one. It also pass 'unsinged long *sp' instead of 'unsigned long **sp' as second parameter. The code looks cleaner. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make get_frame_info() more robustFranck Bui-Huu
Now get_frame_info() wants to detect move sp instruction first. It assumes that the save ra in the stack instruction can't happen before allocating frame size space into the stack. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Simplify dump_stack()Franck Bui-Huu
Make dump_stack() code not depend on CONFIG_KALLSYMS. It also make prepare_frametrace() always inlined to get less false entries reported by show_raw_backtrace(). Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make frame_info_init() more readable.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Miscellaneous cleanup in prologue analysis codeFranck Bui-Huu
We usually use backtrace term for dumping a call tree during debug. Therefore this patch renames show_frametrace() into show_backtrace() and show_trace() into show_raw_backtrace(). It also uses the new function print_ip_sym(). Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Remove unused MODULE_RANGE macro.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make get_frame_info() more readable.Franck Bui-Huu
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] c-r4k: Typo fix.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] N32 rt_sigqueueinfo uses O32 padding, not N64Peter Watkins
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] dump_stack() based on prologue code analysisAtsushi Nemoto
Instead of dump all possible address in the stack, unwind the stack frame based on prologue code analysis, as like as get_wchan() does. While the code analysis might fail for some reason, there is a new kernel option "raw_show_trace" to disable this feature. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] db1x00: Remove unused mirage_ts.cYoichi Yuasa
CONFIG_WM97XX_COMODULE doesn't exist. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Rearrange show_stack, show_traceAtsushi Nemoto
Print call-trace in show_stack() (like on other archs). Also make show_trace() static and simplify its argument list. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Updat mpc30x defconfigYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Updat workpad defconfigYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Update e55 defconfigYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Honour "panic_on_oops" sysctl.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-26[PATCH] Alchemy: Delete unused pt_regs * argument from au1xxx_dbdma_chan_allocRalf Baechle
The third argument of au1xxx_dbdma_chan_alloc's callback function is not used anywhere. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: move HIGHMEM counters into highmem.c/.hChristoph Lameter
Move totalhigh_pages and nr_free_highpages() into highmem.c/.h Move the totalhigh_pages definition into highmem.c/.h. Move the nr_free_highpages function into highmem.c [yoichi_yuasa@tripeaks.co.jp: build fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: fix MAX_NR_ZONES array initializationsChristoph Lameter
Fix array initialization in lots of arches The number of zones may now be reduced from 4 to 2 for many arches. Fix the array initialization for the zones array for all architectures so that it is not initializing a fixed number of elements. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13[MIPS] sparsemem: fix crash in show_memAtsushi Nemoto
With sparsemem, pfn should be checked by pfn_valid() before pfn_to_page(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] vr41xx: Update workpad setup functionYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] vr41xx: Update e55 setup functionYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] vr41xx: Removed old v2.4 VRC4173 driverYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] MIPSsim: Build fix, rename sim_timer_setup -> plat_timer_setup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Remove unused code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] IP22 Fix brown paper bag in RTC code.Julien BLACHE
This patch fixes a typo in arch/mips/sgi-ip22/ip22-time.c, leading to the incorrect year being set into the RTC chip. Signed-off-by: Julien BLACHE <jb@jblache.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Atlas, Malta, SEAD: Don't disable interrupts in mips_time_init().Ralf Baechle
By the time it's called from time_init interrupts are still disabled. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Replace board_timer_setup function pointer by plat_timer_setup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-07-13[MIPS] Nuke redeclarations of board_time_init.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Remove redeclarations of setup_irq().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 21:13:12 +0000