aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2007-10-22Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] time: Make c0_compare_int_usable more bullet proof [MIPS] Kbuild: Use the new cc-cross-prefix feature. [MIPS] Fix include wrapper symbol to something sane. [MIPS] Malta: Delete dead code. [MIPS] time: Add GT641xx timer0 clockevent driver [MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code. [MIPS] time: SMP/NUMA-proofing of IP27 HUB RT timer code. [MIPS] time: Fix calculation in clockevent_set_clock()
2007-10-22[MIPS] time: Make c0_compare_int_usable more bullet proofAtsushi Nemoto
Use write_c0_compare(read_c0_count()) to clear interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] Kbuild: Use the new cc-cross-prefix feature.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] Malta: Delete dead code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] time: Add GT641xx timer0 clockevent driverYoichi Yuasa
And make use of it for Cobalt. A few others such as the Malta could make use of it as well. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code.Ralf Baechle
The BCM148 has 4 cores but there are also just 4 generic timers available so use the ZBbus cycle counter instead of it. In addition the ZBbus counter also offers a much higher resolution and 64-bit counting so I'm considering a later complete conversion to it once I figure out if all members of the Sibyte SOC family support it - the docs seem to agree but the headers files seem to disagree ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] time: SMP/NUMA-proofing of IP27 HUB RT timer code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22[MIPS] time: Fix calculation in clockevent_set_clock()Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22Update arch/ to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-20typo fixesMatt LaPlante
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Delete totally outdated Documentation/mips/time.README [MIPS] Kill duplicated setup_irq() for cp0 timer [MIPS] Sibyte: Finish conversion to modern time APIs. [MIPS] time: Helpers to compute clocksource/event shift and mult values. [MIPS] SMTC: Build fix. [MIPS] time: Delete dead code. [MIPS] MIPSsim: Strip defconfig file to the bones.
2007-10-19Combine instrumentation menus in kernel/Kconfig.instrumentationMathieu Desnoyers
Quoting Randy: "It seems sad that this patch sources Kconfig.marker, a 7-line file, 20-something times. Yes, you (we) don't want to put those 7 lines into 20-something different files, so sourcing is the right thing. However, what you did for avr32 seems more on the right track to me: make _one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES, and MARKERS and then use (source) that in all of the arches." Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Use helpers to obtain task pid in printks (arch code)Alexey Dobriyan
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: define is_global_init() and is_container_init()Serge E. Hallyn
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: round up the APIPavel Emelianov
The set of functions process_session, task_session, process_group and task_pgrp is confusing, as the names can be mixed with each other when looking at the code for a long time. The proposals are to * equip the functions that return the integer with _nr suffix to represent that fact, * and to make all functions work with task (not process) by making the common prefix of the same name. For monotony the routines signal_session() and set_signal_session() are replaced with task_session_nr() and set_task_session(), especially since they are only used with the explicit task->signal dereference. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19task cgroups: enable cgroups by default in some configsPaul Jackson
In pre-cgroup cpusets, a few config files enabled cpusets by default. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19[MIPS] Kill duplicated setup_irq() for cp0 timerAtsushi Nemoto
Also many plat_timer_setup() can be killed too. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] Sibyte: Finish conversion to modern time APIs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] time: Helpers to compute clocksource/event shift and mult values.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] SMTC: Build fix.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] time: Delete dead code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19[MIPS] MIPSsim: Strip defconfig file to the bones.Ralf Baechle
MIPSsim simulates only a barebone system, no point in a fancy kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] time: Move R4000 clockevent device code to separate configurable fileRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] time: Delete dead cycles_per_jiffy, mips_timer_ack and null_timer_ackRalf Baechle
cycles_per_jiffy was only ever getting assigned and the function pointer not being called anymore and mips_timer_ack had gotten similarly stale. I leave the remaining assignments unfixed as a lighthouse pointing platform maintainers to what needs a rewrite. These changes make null_timer_ack() unreferenced, so delete that too. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] IP32: Retire use of plat_timer_setup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] Jazz: Retire use of plat_timer_setup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] IP27: Convert to clock_event_device.Ralf Baechle
This separates the tick timer stuff from the generic MIPS time.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] JMR3927: Convert to clock_event_device.Ralf Baechle
This separate the tick timer stuff from the generic MIPS time.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18[MIPS] Always do the ARC64_TWIDDLE_PC thing.Thomas Bogendoerfer
Always jump to the place where the kernel is linked to. This helps where the bootloaders/proms ignores the start address inside the ELF header. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] IP22: Fix hang due to messing with timer interrupt handlerThomas Bogendoerfer
As IP22 is now using do_IRQ for timer interrupt, don't mess with interrupt handler any longer Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Sibyte: Fix typos in sibyte clockevent driversAtsushi Nemoto
Fix some typo introduced on clockevent conversion. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: replace last remaining instance of au_ffs with ffs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: Reformat PM code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Alchemy: Fix build by conversion to irq_cpu.c.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] MTX1: Enable CONFIG_CROSSCOMPILE in defconfig.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] Probe for usability of cp0 compare interrupt.Ralf Baechle
Some processors offer the option of using the interrupt on which normally the count / compare interrupt would be signaled as a normal interupt pin. Previously this required some ugly hackery for each system which is much easier done by a quick and simple probe. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17[MIPS] SYNC emulation for MIPS I processorsMaciej W. Rozycki
Userland, including the C library and the dynamic linker, is keen to use the SYNC instruction, even for "generic" MIPS I binaries these days. Which makes it less than useful on MIPS I processors. This change adds the emulation, but as our do_ri() infrastructure was not really prepared to take yet another instruction, I have rewritten it and its callees slightly as follows. Now there is only a single place a possible signal is thrown from. The place is at the end of do_ri(). The instruction word is fetched in do_ri() and passed down to handlers. The handlers are called in sequence and return a result that lets the caller decide upon further processing. If the result is positive, then the handler has picked the instruction, but a signal should be thrown and the result is the signal number. If the result is zero, then the handler has successfully simulated the instruction. If the result is negative, then the handler did not handle the instruction; to make it more obvious the calls do not follow the usual 0/-Exxx result convention they now return -1 instead of -EFAULT. The calculation of the return EPC is now at the beginning. The reason is it is easier to handle it there as emulation callees may modify a register and an instruction may be located in delay slot of a branch whose result depends on the register. It has to be undone if a signal is to be raised, but it is not a problem as this is the slow-path case, and both actions are done in single places now rather than the former being scattered through emulation handlers. The part of do_cpu() being covered follows the changes to do_ri(). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2007-10-17[MIPS] Fix modpost warning in raw binary builds.Ralf Baechle
MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x478): Section mismatch: reference to .init.text:start_kernel (between '_stext' and 'run_init_process') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-17spin_lock_unlocked cleanupsRoel Kluin
Replace some SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17remove include/asm-*/ipc.hAdrian Bunk
All asm/ipc.h files do only #include <asm-generic/ipc.h>. This patch therefore removes all include/asm-*/ipc.h files and moves the contents of include/asm-generic/ipc.h to include/linux/ipc.h. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17core_pattern: ignore RLIMIT_CORE if core_pattern is a pipeNeil Horman
For some time /proc/sys/kernel/core_pattern has been able to set its output destination as a pipe, allowing a user space helper to receive and intellegently process a core. This infrastructure however has some shortcommings which can be enhanced. Specifically: 1) The coredump code in the kernel should ignore RLIMIT_CORE limitation when core_pattern is a pipe, since file system resources are not being consumed in this case, unless the user application wishes to save the core, at which point the app is restricted by usual file system limits and restrictions. 2) The core_pattern code should be able to parse and pass options to the user space helper as an argv array. The real core limit of the uid of the crashing proces should also be passable to the user space helper (since it is overridden to zero when called). 3) Some miscellaneous bugs need to be cleaned up (specifically the recognition of a recursive core dump, should the user mode helper itself crash. Also, the core dump code in the kernel should not wait for the user mode helper to exit, since the same context is responsible for writing to the pipe, and a read of the pipe by the user mode helper will result in a deadlock. This patch: Remove the check of RLIMIT_CORE if core_pattern is a pipe. In the event that core_pattern is a pipe, the entire core will be fed to the user mode helper. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <martin.pitt@ubuntu.com> Cc: <wwoods@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Use list_head in binfmt handlingAlexey Dobriyan
Switch single-linked binfmt formats list to usual list_head's. This leads to one-liners in register_binfmt() and unregister_binfmt(). The downside is one pointer more in struct linux_binfmt. This is not a problem, since the set of registered binfmts on typical box is very small -- (ELF + something distro enabled for you). Test-booted, played with executable .txt files, modprobe/rmmod binfmt_misc. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: introduce ccflags-y, asflags-y and ldflags-y kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP kbuild: enable use of AFLAGS and CFLAGS on commandline kbuild: enable 'make AFLAGS=...' to add additional options to AS kbuild: fix AFLAGS use in h8300 and m68knommu kbuild: check for wrong use of CFLAGS kbuild: enable 'make CFLAGS=...' to add additional options to CC kbuild: fix up CFLAGS usage kbuild: make modpost detect unterminated device id lists kbuild: call export_report from the Makefile kbuild: move Kai Germaschewski to CREDITS kconfig/menuconfig: distinguish between selected-by-another options and comments kconfig: tristate choices with mixed tristate and boolean values include/linux/Kbuild: remove duplicate entries kbuild: kill backward compatibility checks kbuild: kill EXTRA_ARFLAGS kbuild: fix documentation in makefiles.txt kbuild: call make once for all targets when O=.. is used kbuild: pass -g to assembler under CONFIG_DEBUG_INFO kbuild: update _shipped files for kconfig syntax cleanup ... Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Increase cp0 compare clockevent min_delta_ns from 0x30 to 0x300. [MIPS] Cache: Provide more information on cache policy on bootup. [MIPS] Fix aliasing bug in copy_user_highpage, take 2. [MIPS] VPE loader: convert from struct class_ device to struct device [MIPS] MIPSsim: Fix booting from NFS root [MIPS] Alchemy: Get rid of au1xxx_irq_map_t. [MIPS] Alchemy: Get rid of au_ffz(). [MIPS] Alchemy: Get rid of au_ffs(). [MIPS] Alchemy: cleanup interrupt code. [MIPS] Lasat: Fix build by conversion to irq_cpu.c. [MIPS] Lasat: Add #ifndef ... #endif include warpper to lasatint.h. [MIPS] IP22: Enable -Werror. [MIPS] IP22: Fix warning. [MIPS] IP22: Complain if requesting the front panel irq failed. [MIPS] vmlinux.lds.S: Handle KPROBES_TEXT. [MIPS] vmlinux.lds.S: Fix handling of .notes in final link. [MIPS] vmlinux.lds.S: Remove duplicate comment. [MIPS] MSP71XX: Add workarounds file. [MIPS] IP32: Fix build by conversion to irq_cpu.c.
2007-10-16[MIPS] Increase cp0 compare clockevent min_delta_ns from 0x30 to 0x300.Ralf Baechle
Extremly low values are of dubious usefulness anyway but in this case they actually were killing Qemu which simply wasn't able to complete mips_next_event() within 0x30 100MHz cycles even on fast hosts. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-16[MIPS] Cache: Provide more information on cache policy on bootup.Ralf Baechle
This should help making bug reports for the gadzillion of cores with all their configuration and synthesis options more useful. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>