aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
AgeCommit message (Collapse)Author
2008-06-16[POWERPC] Fix bootwrapper builds with newer gcc versionsKumar Gala
GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the bootwrapper as we'd need to link with libgcc to get the implementation of the register save/restores. To workaround this issue, we just stole the save/restore code from gcc and simplified it down for our needs (integer only). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2008-06-10[POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO busAnton Vorontsov
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09[POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO spaceKumar Gala
Andrew Klossner pointed out the IO space size was in violation of the alignment requirements for windows on the 85xx. The size should have been 1M (to match u-boot). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09[POWERPC] boot/Makefile CONFIG_ variable fixesAdrian Bunk
This corrects the names of two CONFIG_ variables. Note that the CONFIG_MPC86XADS fix uncovers another bug (with mpc866_ads_defconfig) that will require fixing: <-- snip --> ... arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts" WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-31[POWERPC] Fix DMA nodes in the MPC8610 HPCD device treeTimur Tabi
The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible properties. This breaks the DMA driver and the sound driver. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2008-05-20[POWERPC] Fix mpc8377_mds.dts DMA nodes to match specKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20[POWERPC] Update arch/powerpc/boot/.gitignoreKumar Gala
* Add dtbImage.* * Added zImage.holly * Folded zImage.coff.lds into zImage.*lds * Removed some unused zImage.<foo> ignores Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20[POWERPC] Remove generated files on make cleanKumar Gala
dtbImage.* and several zImage. targets get created but never cleaned up. Also, moved zImage to the clean-files line associated with all other image results (was previously duplicated). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-19[POWERPC] 4xx: Workaround for CHIP_11 ErrataJosh Boyer
The PowerPC 440EP, 440GR, 440EPx, and 440GRx chips have an issue that causes the PLB3-to-PLB4 bridge to wait indefinitely for transaction requests that cross the end-of-memory-range boundary. Since the DDR controller only returns the valid portion of a read request, the bridge will prevent other PLB masters from completing their transactions. This implements the recommended workaround for this errata for chips that use older versions of firmware that do not already handle it. The last 4KiB of memory are hidden from the kernel to prevent the problem transactions from occurring. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-13[POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reportingJeremy McNicoll
The following adds local bus, flash and MTD partition nodes for sbc8548. As well, a compatible field for the soc node, so that of_platform_bus_probe() will pick it up. Something that is provided through this newly added epld node is the Hardware Revision which is now being utilized. Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13[POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Cc: "Nelson, Shannon" <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13[POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashesAnton Vorontsov
This patch adds device tree nodes for NOR and NAND flashes and places board-control node inside the localbus. defconfig and board file updated appropriately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-06[POWERPC] 4xx: Fix PCI mem in sequoia DTSChristian Ehrhardt
This patch is fixes the sequoia.dts device tree file to use the values defined in the 440Epx data sheet from AMCC. That fixes an issue where some devices, including graphics cards, would not initialize properly because the PCI resource space was not big enough. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-01[POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slotAnton Vorontsov
This patch adds pcie node which is resposible for PCI-E x8 slot functioning. Though, this was tested using only x1 SKY2 NIC. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-30[POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 boardJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 formatGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[POWERPC] mpc5200: add Phytec pcm030 board supports.hauer@pengutronix.de
Add board support for the Phytec pcm030 mpc5200b based board. It does not need any platform specific fixups and as such is handled as a mpc5200 simple platform. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[RAPIDIO] Add RapidIO node into MPC8641HPCN dts fileZhang Wei
This adds properties describing the RapidIO controller to the device-tree source for the MPC8641HPCN board. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28fbdev: powerpc: driver for Freescale 8610 and 5121 DIUYork Sun
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25[POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignoreKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] bootwrapper: fix build error on virtex405-head.SGrant Likely
virtex405-head.S is an assembler file, not a C file; therefore BOOTAFLAGS is the correct place to set the needed -mcpu=405 flag. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24[POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dtsStefan Roese
This patch adds default NOR entries to the AMCC Canyonlands (460EX) and Glacier (460GT) dts files. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24[POWERPC] Xilinx: boot support for Xilinx uart 16550.John Linn
The Xilinx 16550 uart core is not a standard 16550 because it uses word-based addressing rather than byte-based adressing. With additional properties it is compatible with the open firmware 'ns16550' compatible binding. This code updates the ns16550 driver to use the reg-offset property so that the Xilinx UART 16550 can be used with it. The reg-shift was already being handled. Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-17[POWERPC] 85xx: Fix the size of qe muram for MPC8568EHaiying Wang
MPC8568E has 64K byte MURAM, so the size should be 0x10000, not 0xc000. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 86xx: mark functions static, other minor cleanupsPaul Gortmaker
Cleanups as suggested by Stephen Rothwell and Dale Farnsworth, which incudes marking a bunch of functions static and add a vendor prefix to the compat node check for uniqueness. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] fsl: Convert dts to v1 syntaxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 85xx: minor .dts cleanupsKumar Gala
* remove #cpus from mpc8544ds.dts (not used anywhere else) * remove memreserve from mpc8568mds.dts (not needed) Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 85xx: Convert dts to v1 syntaxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 86xx: Add device tree source for Wind River SBC8641DPaul Gortmaker
This adds in the device tree source for the SBC8641D, based largely on the mpc8641_hpcn.dts. The biggest differences are the lack of a complex IRQ mapping (since no Uli/i8259 cascade) and the different layout of devices on the localbus node. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] cuboot-pq2: PCI fixesScott Wood
1. Detect (and bail out on) more conditions that violate the assumptions of the setup code -- we assume in such cases that the device tree is correct and reflects what the firmware did. 2. The inbound memory mask calculation was wrong. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] QE: UCC nodes cleanupAnton Vorontsov
- get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] ep8248e: Reference SMC parameter RAM base in the device tree.Laurent Pinchart
This patch modifies the Embedded Planet EP8248E device tree to reference the SMC paramater RAM base register instead of the parameter RAM allocated by the boot loader. The cpm_uart driver will allocate parameter RAM itself, making the serial port initialisation independent of the boot loader. The patch adds the parameter RAM allocated by the boot loader in the CPM muram node, making it available to the kernel. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.Laurent Pinchart
This patch relocates the buffer descriptors and the SMC parameter RAM at the end of the first CPM muram chunk, as described in the device tree. This allows device trees to stop excluding SMC parameter ram allocated by the boot loader from the CPM muram node. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] Add bootwrapper function to get virtual reg from the device tree.Laurent Pinchart
This patch adds a new generic device tree processing function that retrieves virtual reg addresses from the device tree to the bootwrapper code. It also updates the bootwrapper code to use the new function. dt_get_virtual_reg() retrieves the virtual reg addresses from the "virtual-reg" property. If the property can't be found, it uses the "reg" property and walks the tree to translate it to absolute addresses. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 85xx: Enable DMA engine on the MPC8544 DSSebastian Siewior
Add the device tree node for the DMA engine on 8544, publish the device and enable the driver in the defconfig. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] bootwrapper: Use physical address in PHDR for uImageKumar Gala
Now that we properly set the physical address in the program header of the vmlinux ELF we can extract it to properly set the load and entry point for u-boot uImages. Before we always hard coded the load & entry point to 0. However there are situations that the kernel may be built with a non-zero physical address. We use objdump to extract the PHDR. We assume that there is only one PHDR in the vmlinux of type LOAD. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] prpmc2800 needs a dtbImageDale Farnsworth
The prpmc2800 platform requires a zImage formatted file with an embedded dtb file. Rename the requested boot image file to dtbImage.prpmc2800. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] mv643xx_eth: Prepare to support multiple silicon blocksDale Farnsworth
The mv643xx_eth driver is being modified to support multiple instances of the ethernet silicon block on the same platform. Each block contains a single register bank containing the registers for up to three ports interleaved within that bank. This patch updates the PowerPC OF to platform_device glue code to support multiple silicon blocks, each with up to three ethernet ports. The main difference is that we now allow multiple mv64x60_shared platform_devices to be registered and we provide each port platform_device with a pointer to its associated shared platform_device. The pointer will not be used until the mv643xx_eth driver changes are committed. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] prpmc2800: Clean up dts propertiesMark A. Greer
Remove several unused (or software config only) properties. Rename marvel node to "system-controller". Also, rename the "block-index" property to "cell-index" to conform to current practice. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] mv64x60: Remove device tree absolute path referencesDale Farnsworth
Replace several device node absolute path lookups in the mv64x60 bootwrapper code with lookups by compatible or device_type properties. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360Mark A. Greer
Compatible names should refer to a specific version of the hardware, without wildcards. Change each instance of mv64x60 to mv64360, which is the oldest version we currently support. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] prpmc2800: Fix frequencies in prpmc2800.dtsDale Farnsworth
After the conversion to dts v1 format, seeing the frequencies in decimal made it obvious that some of them had been incorrectly truncated. This fixes them. Note that the PCI frequency comes from a different source and is documented as 66MHz, so it was left at 66000000. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] prpmc2800: Convert DTS to v1 and add labelsMark A. Greer
Update the prpmc2800 DTS file to version 1 and add labels. I verified that there was no change in the resulting dtb file. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-14Merge branch 'linux-2.6'Paul Mackerras
2008-04-05[POWERPC] 4xx: Change dts files to support jumbo framesStefan Roese
This patch changes the "max-frame-size" property to 9000 for all gbit enabled 4xx boards. All those ports generally support jumbo frames, so let's give the user a chance to enable it. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-05[POWERPC] 4xx: Some EMAC related changes in Canyonlands & Glacier dts filesStefan Roese
This patch fixes some problems in the Canyonlands 460EX and Glacier 460GT dts files: - Add "mdio-device = <&EMAC0>" to all all EMAC's except for EMAC0 itself (the 460EX/GT only can access the PHY via the EMAC0 instance) - Add TAH support to Canyonlands dts Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-03[POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet worksRené Bürgel
This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] mpc5200: Amalgamated DTS fixes and updatesBartlomiej Sieka
DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>