aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
AgeCommit message (Collapse)Author
2008-08-11Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Remove include/linux/harrier_defs.h powerpc: Do not ignore arch/powerpc/include powerpc: Delete completed "ppc removal" task from feature removal file powerpc/mm: Fix attribute confusion with htab_bolt_mapping() powerpc/pci: Don't keep ISA memory hole resources in the tree powerpc: Zero fill the return values of rtas argument buffer powerpc/4xx: Update defconfig files for 2.6.27-rc1 powerpc/44x: Incorrect NOR offset in Warp DTS powerpc/44x: Warp DTS changes for board updates powerpc/4xx: Cleanup Warp for i2c driver changes. powerpc/44x: Adjust warp-nand resource end address
2008-08-05powerpc: 86xx: mpc8610_hpcd: add watchdog nodeAnton Vorontsov
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04powerpc/44x: Incorrect NOR offset in Warp DTSSean MacLennan
FPGA offset in NOR flash was converted incorrectly when switching from 64M to 4M flash. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-04powerpc/44x: Warp DTS changes for board updatesSean MacLennan
Added support for the new at24 eeprom driver. Documented a new fpga section, the DMA scatter gather list. Removed index from i2c. No longer needed. Fixed the leds section. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-29powerpc/fsl: proliferate simple-bus compatibility to soc nodesKim Phillips
add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-22powerpc/boot: Change spaces to tabsAdrian Bunk
For C code spaces versus tabs is just a religious issue, but for Makefiles it actually matters. This patch fixes he following errors: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator. Stop. /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator. Stop. Since this was inside an ifdef DTC_GENPARSER it was not a problem unless someone wanted to regenerate the shipped generated files. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-16powerpc/86xx: mpc8610_hpcd - add support for ULI RTCAnton Vorontsov
The ULI "Super South Bridge" contains ISA bridge to the legacy devices, such as Super IO mouse/keyboard/floppy disk controllers, parallel port, i8259 interrupt controller and so on. i8259 is disabled on the MPC8610HPCD, and other peripherals are not traced out. So we use only RTC. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/mpc7448: add alias list to DTS, clean out old chosen nodePaul Gortmaker
The mpc7448hpc2 board doesn't have an alias block like most of the other modern eval boards have. We need this block in order to have u-boot be able to make use of the CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node) in the future. Also remove the old, redundant chosen node. Of all the modern Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only one which still has it. Its presence also breaks with some older versions of u-boot, like 1.3.1 -- which try and insert a second chosen node. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc/mpc8313erdb: Add power management to the device tree.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-15Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-07-15Merge commit 'jwb/jwb-next'Benjamin Herrenschmidt
2008-07-14powerpc/fsl: update crypto node definition and device tree instancesKim Phillips
delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/CPM: Add i2c pins to dts and board setupJochen Friedrich
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: Add support for MPC8536DSKumar Gala
Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: TQM8548: add missing support for RTC and LM75Wolfgang Grandegger
It adds the missing RTC node to tqm8548.dts and enables support for I2C, DS1307 and LM75 in the default configuration. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/86xx: mpc8610_hpcd: fix interrupt trigger type for ULi IDEAnton Vorontsov
i8259 PIC is disabled on MPC8610HPCD, and ULi IDE is configured to use PCI sideband interrupt that is specified in the device tree. Current HPCD's device tree specify that IDE interrupt is low to high sensitive, but in practice ULi IDE throws active-high interrupts (not active-low as all normal PCI devices). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: Fix KSI8560 .dtsKumar Gala
Rename MPIC label to mpic to match all other 85xx .dts and to fix compile issue introduced by addition of the DMA node. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14Merge commit 'origin/HEAD' into test-mergeBenjamin Herrenschmidt
Manual fixup of include/asm-powerpc/pgtable-ppc64.h
2008-07-12powerpc/mpc5121: Update device tree for MPC5121ADS evaluation boardJohn Rigby
Current device tree is only bare bones. This patch adds nodes to make it a complete tree for the MPC5121ads. Added nodes include: mbx - opengl coprocessor nfc - nand flash controller cpld-pic - on board cpld rtc clock - clock control pmc - power management control gpio mscan - can module i2c axe - audio coprocessor display - display interface unit mdio ethernet usb ioctl - pin config pata ac97 - PSC configured as AC97 pscfifo - psc fifo configuration dma pci Fix typo in header changing MDS to ADS. Add a compatible property of the form "fsl,mpc5121-..." to nodes missing one. Changed localbus compatible to fsl,mpc5121-localbus, this does not break anything because the only code that uses it finds it via the node name, not compatible. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5200: add missing MSCAN FDT nodes for TQM52xxWolfgang Grandegger
This patch adds the still missing FDT nodes for the MSCAN devices for the TQM52xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-09powerpc/440: Convert Virtex ML507 device tree to dts-v1Grant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-09powerpc/bootwrapper: Allow user to specify additional default targetsGrant Likely
It is inconvenient to add additional default targets to the bootwrapper Makefile for each new board supported which just needs a different dts file. This change allows the defconfig to specify additional build targets. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09ibm_newemac: Parameterize EMAC Multicast Match HandlingGrant Erickson
Various instances of the EMAC core have varying: 1) number of address match slots, 2) width of the registers for handling address match slots, 3) number of registers for handling address match slots and 4) base offset for those registers. As the driver stands today, it assumes that all EMACs have 4 IAHT and GAHT 32-bit registers, starting at offset 0x30 from the register base, with only 16-bits of each used for a total of 64 match slots. The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4 core. This core has 8 IAHT and GAHT registers, starting at offset 0x80 from the register base, with ALL 32-bits of each used for a total of 256 match slots. This adds a new compatible device tree entry "emac4sync" and a new, related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros and inlines which supply the appropriate parameterized value based on the presence or absence of the EMAC4SYNC feature. The code has further been reworked where appropriate to use those macros and inlines. In addition, the register size passed to ioremap is now taken from the device tree: c4 for EMAC4SYNC cores 74 for EMAC4 cores 70 for EMAC cores rather than sizeof (emac_regs). Finally, the device trees have been updated with the appropriate compatible entries and resource sizes. This has been tested on an AMCC Haleakala board such that: 1) inbound ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11 and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from 'haleakala.local' to those same systems in the '.local' domain via MDNS now work. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-04powerpc/bootwrapper: add missing bit of simpleImage targetGrant Likely
The wrapper script is missing the bits needed for building generic simpleImage targets (targets which don't depend on any particular firmware interface and retrieve all their data from the device tree). Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-04powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440John Linn
The following changes add processing to initialize the Xilinx 16550 UART in the boot wrapper for Virtex targets without firmware. Normally the boot wrapper assumes that the serial port has already been initialized by firmware. The wrapper was also modified to add the 440 build. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-04powerpc/virtex: add dts file for ML507 reference designJohn Linn
This new file adds support for the ML507 reference design. The ML507 uses the Virtex 5 FXT FPGA which embeds a ppc440 core. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-01powerpc/bootwrapper: update for initrd with simpleImageJohn Linn
This change to the makefile corrects the build of a simpleImage with initrd. Signed-off-by: John Linn <john.linn@xilinx> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-01powerpc/bootwrapper: Pad .dtb by defaultKumar Gala
Since most bootloaders or wrappers tend to update or add some information to the .dtb they a handled they need some working space to do that in. By default add 1K of padding via a default setting of DTS_FLAGS. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Change the default link address for pSeries zImage kernelsTony Breeds
Currently we set the start of the .text section to be 4Mb for pSeries. In situations where the zImage is > 8Mb we'll fail to boot (due to overlapping with OF). Move .text in a zImage from 4MB to 64MB (well past OF). We still will not be able to load large zImage unless we also move OF, to that end, add a note to the zImage ELF to move OF to 32Mb. If this is the very first kernel booted then we'll need to move OF manually by setting real-base. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30Merge branch 'linux-2.6'Paul Mackerras
2008-06-30Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx
2008-06-27powerpc: Add dma nodes to 83xx, 85xx and 86xx boardsKumar Gala
Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-16[POWERPC] Fix bootwrapper builds with newer gcc versionsKumar Gala
GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the bootwrapper as we'd need to link with libgcc to get the implementation of the register save/restores. To workaround this issue, we just stole the save/restore code from gcc and simplified it down for our needs (integer only). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2008-06-11powerpc/4xx: Convert Sam440ep DTS to dts-v1Giuseppe Coviello
This makes the sam440ep.dts dts-v1 compliant. Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11powerpc/4xx: Sam440ep supportGiuseppe Coviello
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11powerpc/4xx: MTD support for the AMCC Taishan BoardImre Kaloz
Add support for the NOR flash found on the AMCC Taishan Board and enable MTD support in the defconfig. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-10powerpc/83xx: new board support: MPC8360E-RDKAnton Vorontsov
This is patch adds board file, device tree, and defconfig for the new board, made by Freescale Semiconductor Inc. and Logic Product Development. Currently supported: 1. UEC{1,2,7,4}; 2. I2C; 3. SPI; 4. NS16550 serial; 5. PCI and miniPCI; 6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85; 7. Graphics controller, Fujitsu MB86277. Not supported in this patch: 1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver); 2. FHCI USB (supported with FHCI driver). 3. QE Serial UCCs (tested to not work with ucc_uart driver, reason unknown, yet); 4. ADC AD7843 (tested to work, but support via device tree depends on major SPI rework, GPIO API, etc); Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dtsWolfgang Grandegger
This patch adds local bus nodes for Flash and CAN to the DTS file of the TQM8560 module (tqm8560.dts). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: support for the TQM8548 module using the big FlashWolfgang Grandegger
Some TQM85xx boards could be equipped with up to 1 GiB (NOR) flash memory and therefore a modified memory map is required and setup by the board loader. This patch adds an appropriate DTS file. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add board support for the TQM8548 modulesWolfgang Grandegger
This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modulesWolfgang Grandegger
Like for the TQM5200, the vendor prefix "tqc," is now used for all TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the corresponding DTS files. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10[POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO busAnton Vorontsov
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09[POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO spaceKumar Gala
Andrew Klossner pointed out the IO space size was in violation of the alignment requirements for windows on the 85xx. The size should have been 1M (to match u-boot). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09powerpc: Boot code for the C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 2 of 5: support for the board in arch/powerpc/boot. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09powerpc: DTS file for the C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 1 of 5: DTS file describing the board peripherals. As far as I know all peripherals except the FPGA are listed in there (I did not include the FPGA because a lot of work is needed there). Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09Merge branch 'merge'Paul Mackerras
Conflicts: arch/powerpc/sysdev/fsl_soc.c
2008-06-09[POWERPC] boot/Makefile CONFIG_ variable fixesAdrian Bunk
This corrects the names of two CONFIG_ variables. Note that the CONFIG_MPC86XADS fix uncovers another bug (with mpc866_ads_defconfig) that will require fixing: <-- snip --> ... arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts" WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-02[POWERPC] 85xx: Add next-level-cache propertyKumar Gala
Added next-level-cache to the L1 and a reference to the new L2 label. This is per the ePAPR 0.94 spec. Since we are't really dependent on this today we aren't supporting the "legacy" l2-cache phandle that is specified in the PPC v2.1 OF Binding spec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>