aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/kprobes.c
AgeCommit message (Collapse)Author
2006-05-03[PATCH] powerpc/kprobes: fix singlestep out-of-lineAnanth N Mavinakayanahalli
We currently single-step inline if the instruction on which a kprobe is inserted is a trap variant. - variants (such as tdnei, used by BUG()) typically evaluate a condition and cause a trap only if the condition is satisfied. - kprobes uses the unconditional "trap" (0x7fe00008) and single-stepping again on this instruction, resulting in another trap without evaluating the condition is obviously incorrect. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-19[PATCH] Switch Kprobes inline functions to __kprobes for ppc64Prasanna S Panchamukhi
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] kprobes: fix broken fault handling for powerpc64Prasanna S Panchamukhi
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] kprobe handler: discard user space trapbibo,mao
Currently kprobe handler traps only happen in kernel space, so function kprobe_exceptions_notify should skip traps which happen in user space. This patch modifies this, and it is based on 2.6.16-rc4. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: <hiramatu@sdl.hitachi.co.jp> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] sem2mutex: kprobesIngo Molnar
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-10[PATCH] powerpc: trivial: modify comments to refer to new location of filesJon Mason
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] kprobes: fix race in recovery of reentrant probeKeshavamurthy Anil S
There is a window where a probe gets removed right after the probe is hit on some different cpu. In this case probe handlers can't find a matching probe instance related to break address. In this case we need to read the original instruction at break address to see if that is not a break/int3 instruction and recover safely. Previous code had a bug where we were not checking for the above race in case of reentrant probes and the below patch fixes this race. Tested on IA64, Powerpc, x86_64. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: fix build breakageAnanth N Mavinakayanahalli
The following patch (against 2.6.15-rc5-mm3) fixes a kprobes build break due to changes introduced in the kprobe locking in 2.6.15-rc5-mm3. In addition, the patch reverts back the open-coding of kprobe_mutex. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: arch_remove_kprobeAnil S Keshavamurthy
Currently arch_remove_kprobes() is only implemented/required for x86_64 and powerpc. All other architecture like IA64, i386 and sparc64 implementes a dummy function which is being called from arch independent kprobes.c file. This patch removes the dummy functions and replaces it with #define arch_remove_kprobe(p, s) do { } while(0) Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes-changed-from-using-spinlock-to-mutex fixKeshavamurthy Anil S
Based on some feedback from Oleg Nesterov, I have made few changes to previously posted patch. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: changed from using spinlock to mutexAnil S Keshavamurthy
Since Kprobes runtime exception handlers is now lock free as this code path is now using RCU to walk through the list, there is no need for the register/unregister{_kprobe} to use spin_{lock/unlock}_isr{save/restore}. The serialization during registration/unregistration is now possible using just a mutex. In the above process, this patch also fixes a minor memory leak for x86_64 and powerpc. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] kprobes: increment kprobe missed count for multiprobesKeshavamurthy Anil S
When multiple probes are registered at the same address and if due to some recursion (probe getting triggered within a probe handler), we skip calling pre_handlers and just increment nmissed field. The below patch make sure it walks the list for multiple probes case. Without the below patch we get incorrect results of nmissed count for multiple probe case. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14powerpc: Move most remaining ppc64 files over to arch/powerpcPaul Mackerras
Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras <paulus@samba.org>