aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/pci-common.c
AgeCommit message (Collapse)Author
2009-06-02powerpc/pci: Fix annotation of pcibios_claim_one_busStephen Rothwell
It was __devinit, but it is also within a CONFIG_HOTPLUG guarded section of code, so the __devinit does nothing but cause the following warning: WARNING: vmlinux.o(.text+0x107a8): Section mismatch in reference from the function pcibios_finish_adding_to_bus() to the function .devinit.text:pcibios_claim_one_bus() The function pcibios_finish_adding_to_bus() references the function __devinit pcibios_claim_one_bus(). This is often because pcibios_finish_adding_to_bus lacks a __devinit annotation or the annotation of pcibios_claim_one_bus is wrong. It is also only (externally) used in arch/powerpc/kernel/of_platform.c which cannot be built as a module so don't export it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc: Fix PCI ROM accessBenjamin Herrenschmidt
A couple of issues crept in since about 2.6.27 related to accessing PCI device ROMs on various powerpc machines. First, historically, we don't allocate the ROM resource in the resource tree. I'm not entirely certain of why, I susepct they often contained garbage on x86 but it's hard to tell. This causes the current generic code to always call pci_assign_resource() when trying to access the said ROM from sysfs, which will try to re-assign some new address regardless of what the ROM BAR was already set to at boot time. This can be a problem on hypervisor platforms like pSeries where we aren't supposed to move PCI devices around (and in fact probably can't). Second, our code that generates the PCI tree from the OF device-tree (instead of doing config space probing) which we mostly use on pseries at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any resource. That means that any attempt at re-assigning such a resource with pci_assign_resource() would fail due to resource_alignment() returning 0. This fixes this by doing these two things: - The code that calculates resource flags based on the OF device-node is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at it also set IORESOURCE_READONLY for ROMs since we were lacking that too - We now allocate ROM resources as part of the resource tree. However to limit the chances of nasty conflicts due to busted firmwares, we only do it on the second pass of our two-passes allocation scheme, so that all valid and enabled BARs get precedence. This brings pSeries back the ability to access PCI ROMs via sysfs (and thus initialize various video cards from X etc...). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24powerpc/pci: Default to dma_direct_ops for pci dma_opsKumar Gala
This will allow us to remove the ppc32 specific checks in get_dma_ops() that defaults to dma_direct_ops if the archdata is NULL. We really should always have archdata set to something going forward. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11powerpc/pci: Fix typo: s/resouces/resources/ in a pr_debugWolfram Sang
Fix typo: s/resouces/resources/ in a pr_debug Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11powerpc/pci: Move hose_list and pci_address_to_pio to pci-commonMilton Miller
move the definition of hose_list next to its hotplug spinlock. create pcibios_io_size to encapsulate ifdef in existing pci-common function pcibios_vaddr_is_ioport move pci_address_to_pio to pci-common, using new pcibios_io_size, and protect this GPL exported function against concurrent hotplug removal Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc/pci: mmap anonymous memory when legacy_mem doesn't existBenjamin Herrenschmidt
The new legacy_mem file in sysfs is causing problems with X on machines that don't support legacy memory access. The way I initially implemented it, we would fail with -ENXIO when trying to mmap it, thus exposing to X that we do support the API but there is no legacy memory. Unfortunately, X poor error handling is causing it to fail to start when it gets this error. This implements a workaround hack that instead maps anonymous memory instead (using shmem if VM_SHARED is set, just like /dev/zero does). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-02powerpc: Fix oops on some machines due to incorrect pr_debug()Benjamin Herrenschmidt
Recently, a patch left DEBUG enabled in the powerpc common PCI code, resulting in an old bug in a pr_debug() statement to show up and cause a NULL dereference on some machines. This fixes the pr_debug() statement and reverts to DEBUG not being force-enabled in that file. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08powerpc/pci: Reserve legacy regions on PCIBenjamin Herrenschmidt
There's a problem on some embedded platforms when we re-assign everything on PCI, such as 44x. The generic code tries to avoid assigning devices to addresses overlapping the low legacy addresses such as VGA hard decoded areas using constants that are unfortunately no good for us, as they don't take into account the address translation we do to access PCI busses. Thus we end up allocating things like IO BARs to 0, which is technically legal, but will shadow hard decoded ports for use by things like VGA cards. This works around it by attempting to reserve legacy regions before we try to assign addresses. NOTE: This may have nasty side effects in cases I haven't tested yet: - We try to use FW mappings (ie. powermac) and the FW has allocated a conflicting address over those legacy regions. This will typically happen. I would expect the new code to just fail with an informative message without harm but I haven't had a chance to test that scenario yet. - A device with fixed BARs overlapping those legacy addresses such as an IDE controller in legacy mode is in the system. I don't know for sure yet what will happen there, I have to test :-) Ideally, we should change PCIBIOS_MIN_IO/MIN_MEM accross the board to take a bus pointer so they can provide appropriate per-bus translated values to the generic code but that's a more invasive patch. I will do that in the future, but in the meantime, this fixes the problem locally Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-21powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDEDBenjamin Herrenschmidt
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in in the hash code based on some CPU feature bit. We also manipulate _PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places. This changes the logic so that instead, the PTE now contains _PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms that need it. The hash code clears it if the feature bit is not set. It also adds some clean accessors to setup various valid combinations of access flags and change various bits of code to use them instead. This should help having the PTE actually containing the bit combinations that we really want. I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead set it explicitely from the TLB miss. I will ultimately remove it completely as it appears that it might not be needed after all but in the meantime, having it in the TLB miss makes things a lot easier. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove `have_of' global variableAnton Vorontsov
The `have_of' variable is a relic from the arch/ppc time, it isn't useful nowadays. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-06powerpc/pci: Cosmetic cleanups of pci-common.cBenjamin Herrenschmidt
This does a few cosmetic cleanups, moving a couple of things around but without actually changing what the code does. (There is a minor change in ordering of operations in pcibios_setup_bus_devices but it should have no impact). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-06powerpc/pci: Fix various pseries PCI hotplug issuesBenjamin Herrenschmidt
The pseries PCI hotplug code has a number of issues, ranging from incorrect resource setup to crashes, depending on what is added, when, whether it contains a bridge, etc etc.... This fixes a whole bunch of these, while actually simplifying the code a bit, using more generic code in the process and factoring out common code between adding of a PHB, a slot or a device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-06powerpc/pci: Make pcibios_allocate_bus_resources more robustBenjamin Herrenschmidt
To properly fix PCI hotplug, it's useful to be able to make the fixup passes on all devices whether they were just hot plugged or already there. However, pcibios_allocate_bus_resources() wouldn't cope well with being called twice for a given bus. This makes it ignore resources that have already been allocated, along with adding a bit of debug output. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-06powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setupBenjamin Herrenschmidt
Currently, our PCI code uses the pcibios_fixup_bus() callback, which is called by the generic code when probing PCI buses, for two different things. One is to set up things related to the bus itself, such as reading bridge resources for P2P bridges, fixing them up, or setting up the iommu's associated with bridges on some platforms. The other is some setup for each individual device under that bridge, mostly setting up DMA mappings and interrupts. The problem is that this approach doesn't work well with PCI hotplug when an existing bus is re-probed for new children. We fix this problem by splitting pcibios_fixup_bus into two routines: pcibios_setup_bus_self() is now called to setup the bus itself pcibios_setup_bus_devices() is now called to setup devices pcibios_fixup_bus() is then modified to call these two after reading the bridge bases, and the OF based PCI probe is modified to avoid calling into the first one when rescanning an existing bridge. [paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c is including it unconditionally.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05powerpc/pci: Remove pcibios_do_bus_setup()Benjamin Herrenschmidt
The function pcibios_do_bus_setup() was used by pcibios_fixup_bus() to perform setup that is different between the 32-bit and 64-bit code. This difference no longer exists, thus the function is removed and the setup now done directly from pci-common.c. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05powerpc/pci: Use common PHB resource hookupBenjamin Herrenschmidt
The 32-bit and 64-bit powerpc PCI code used to set up the resource pointers of the root bus of a given PHB in completely different places. This unifies this in large part, by making 32-bit use a routine very similar to what 64-bit does when initially scanning the PCI busses. The actual setup of the PHB resources itself is then moved to a common function in pci-common.c. This should cause no functional change on 64-bit. On 32-bit, the effect is that the PHB resources are going to be setup a bit earlier, instead of being setup from pcibios_fixup_bus(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05powerpc/pci: Cleanup debug printk'sBenjamin Herrenschmidt
This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05powerpc: Fix domain numbers in /proc on 64-bitBenjamin Herrenschmidt
The code to properly expose domain numbers in /proc is somewhat bogus on ppc64 as it depends on the "buid" field being non-0, but that field is really pseries specific. This removes that code and makes ppc64 use the same code as 32-bit which effectively decides whether to expose domains based on ppc_pci_flags set by the platform, and sets the default for 64-bit to enable domains and enable compatibility for domain 0 (which strips the domain number for domain 0 to help with X servers). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31powerpc/pci: Properly allocate bus resources for hotplug PHBsNathan Fontenot
Resources for PHB's that are dynamically added to a system are not properly allocated in the resource tree. Not having these resources allocated causes an oops when removing the PHB when we try to release them. The diff appears a bit messy, this is mainly due to moving everything one tab to the left in the pcibios_allocate_bus_resources routine. The functionality change in this routine is only that the list_for_each_entry() loop is pulled out and moved to the necessary calling routine. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-22powerpc: Further compile fixup for STRICT_MM_TYPECHECKSDavid Gibson
A patch of mine was recently committed to fix up STRICT_MM_TYPECHECKS behaviour on powerpc (f5ea64dcbad89875d130596df14c9b25d994a737). However, something which breaks it again seems to have slipped in afterwards. So, here's another small fix. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-20powerpc/PCI: Add legacy PCI access via sysfsBenjamin Herrenschmidt
This patch adds support for legacy_io and legacy_mem files in bus class directories in sysfs for powerpc Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-15powerpc/pci: Improve detection of unassigned bridge resourcesBenjamin Herrenschmidt
When the powerpc PCI layer is not configured to re-assign everything, it currently fails to detect that a PCI to PCI bridge has been left unassigned by the firmware and tries to allocate resource for the default window values in the bridge (0...X) (with the notable exception of a hack we have in there that detects some Apple firmware unassigned bridge resources). This results in resource allocation failures, which are generally fixed up later on but it causes scary warnings in the logs and we have seen the fixup code fall over in some circumstances (a different issue to fix as well). This code improves that by providing a more complete & useful function to intuit that a bridge was left unassigned by the firmware, and thus force a full re-allocation by the PCI code without trying to allocate the existing useless resources first. The algorithm we use basically considers unassigned a window that starts at 0 (PCI address) if the corresponding address space enable bit is not set. In addition, for memory space, it considers such a resource unassigned also if the host bridge isn't configured to forward cycles to address 0 (ie, the resource basically overlaps main memory). This fixes a range of problems with things like Bare-Metal support on pSeries machines, or attempt to use partial firmware PCI setup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-07powerpc: Fix sysfs pci mmap on 32-bit machines with 64-bit PCIBenjamin Herrenschmidt
When manipulating 64-bit PCI addresses, the code would lose the top 32-bit in a couple of places when shifting a pfn due to missing type casting from the 32-bit pfn to a 64-bit resource before the shift. This breaks using newer X servers for example on 440 machines with the PCI bus above 32-bit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-09-24powerpc: Merge 32 and 64-bit dma codeBecky Bruce
We essentially adopt the 64-bit dma code, with some changes to support 32-bit systems, including HIGHMEM. dma functions on 32-bit are now invoked via accessor functions which call the correct op for a device based on archdata dma_ops. If there is no archdata dma_ops, this defaults to dma_direct_ops. In addition, the dma_map/unmap_page functions are added to dma_ops because we can't just fall back on map/unmap_single when HIGHMEM is enabled. In the case of dma_direct_*, we stop using map/unmap_single and just use the page version - this saves a lot of ugly ifdeffing. We leave map/unmap_single in the dma_ops definition, though, because they are needed by the iommu code, which does not implement map/unmap_page. Ideally, going forward, we will completely eliminate map/unmap_single and just have map/unmap_page, if it's workable for 64-bit. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-11powerpc/pci: Don't keep ISA memory hole resources in the treeBenjamin Herrenschmidt
When we have an ISA memory hole (ie, a PCI window that allows us to generate PCI memory cycles at low PCI address) mixed with other resources using a different CPU <=> PCI mapping, we must not keep the ISA hole in the bridge resource list. If we do, things might start trying to allocate device resources in there and will get the PCI addresses wrong. This fixes it by arranging to remove the ISA memory hole resource in this case. This fixes various cases of PCMCIA breakage on PowerBooks using the MPC106 "grackle" bridge. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-22powerpc: Fix OF parsing of 64 bits PCI addressesBenjamin Herrenschmidt
The OF parsing code for PCI addresses isn't always treating properly the address space indication 0b11 (ie. 0x3) as meaning 64 bits memory space. This means that it fails to parse addresses for PCI BARs that have this encoding set by the firmware, which happens on some SLOF versions and breaks offb palette handling on Powerstation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
2008-04-20PCI: powerpc: use generic pci_enable_resources()Bjorn Helgaas
Use the generic pci_enable_resources() instead of the arch-specific code. The generic version is functionally equivalent, but uses dev_printk. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-13[POWERPC] Fix bogus test for unassigned PCI resourcesBenjamin Herrenschmidt
A bogus test for unassigned resources that came from our 32-bit PCI code ended up being "merged" by my previous patch series, breaking some 64-bit setups where devices have legal resources ending at 0xffffffff. This fixes it by completely changing the test. We now test for res->start == 0, as the generic code expects, and we also only do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag set, as there are cases of pSeries and iSeries where it could be a valid value and those can't reassign devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23[POWERPC] Fixup transparent P2P resourcesKumar Gala
For transparent P2P bridges the first 3 resources may get set from based on BAR registers and need to get fixed up. Where as the remainder come from the parent bus and have already been fixed up. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resourcesKumar Gala
The fixup code that handles the case for PowerMac's that leave bridge windows open over an inaccessible region should only be applied to memory resources (IORESOURCE_MEM). If not we can get it trying to fixup IORESOURCE_IO on some systems since the other conditions that are used to detect the case can easily match for IORESOURCE_IO. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-31Revert "[POWERPC] Disable PCI IO/Mem on a device when resources can't be ↵Paul Mackerras
allocated" This reverts commit 553aa7659bc0e188348f64e978343ed984eb6e56 at Ben H's request, because it confused IORESOURCE_* flags with command register bits. Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Fix PCI IRQ fallback code to not map IRQ 0Benjamin Herrenschmidt
The PCI IRQ code has a fallback when the device-tree parsing fails, that tries to map the interrupt indicated by PCI_INTERRUPT_LINE if the firmware set something in there. This is a bit fragile but has proven useful in some cases so far. However, it's causing us to incorrectly try to map interrupt 0 on various setups, so let's prevent that case, as none of the cases where the fallback is legit should have an IRQ 0. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Disable PCI IO/Mem on a device when resources can't be allocatedBenjamin Herrenschmidt
This patch changes the PowerPC PCI code to disable IO and/or Memory decoding on a PCI device when a resource of that type failed to be allocated. This is done to avoid having unallocated dangling BARs enabled that might try to decode on top of other devices. If a proper resource is assigned later on, then pci_enable_device() will take care of re-enabling decoding. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Fixup skipping of PowerMac PCI<->PCI bridge "closed" resourcesBenjamin Herrenschmidt
Apple firmware has a strange way to "close" bridge resources by setting them to some bogus values that overlap RAM (strangely, I haven't seen it conflicting with DMA so far...). This explicitely closes them to avoid problems. Previously, they would be closed as a consequence of failing to be allocated, but this makes it more explicit, and thus the log message is more explicit too. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Various fixes to pcibios_enable_device()Benjamin Herrenschmidt
Our implementation of pcibios_enable_device() has a couple of problems. One is that it should not check IORESOURCE_UNSET, as this might be left dangling after resource assignment (shouldn't but there are bugs), but instead, we make it check resource->parent which should be a reliable indication that the resource has been successfully claimed (it's in the resource tree). Then, we also need to skip ROM resources that haven't been enabled as x86 does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Merge 32 and 64 bits pcibios_enable_deviceBenjamin Herrenschmidt
This merge the two implementations, based on the previously fixed up 32 bits one. The pcibios_enable_device_hook in ppc_md is now available for ppc64 use. Also remove the new unused "initial" parameter from it and fixup users. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] fix iSeries PCI resource managementBenjamin Herrenschmidt
The way iSeries manages PCI IO and Memory resources is a bit strange and is based on overriding the content of those resources with home cooked ones afterward. This changes it a bit to better integrate with the new resource handling so that the "virtual" tokens that iSeries replaces resources with are done from the proper per-device fixup hook, and bridge resources are set to enclose that token space. This fixes various things such as the output of /proc/iomem & ioports, among others. This also fixes up various boot messages as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Merge PCI resource allocation & assignmentBenjamin Herrenschmidt
The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Merge PCI resource fixupsBenjamin Herrenschmidt
The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Merge pcibios_resource_to_bus/bus_to_resourceBenjamin Herrenschmidt
This merges the PowerPC 32 and 64 bits version of pcibios_resource_to_bus and pcibios_bus_to_resource(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] pci32: Add platform option to enable /proc PCI domainsBenjamin Herrenschmidt
This adds flags the platforms can use to enable domain numbers in /proc/bus/pci. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Merge pci_process_bridge_OF_ranges()Benjamin Herrenschmidt
This merges the 32-bit and 64-bit implementations of pci_process_bridge_OF_ranges(). The new function is cleaner than both the old ones, and supports 64 bits ranges on ppc32 which is necessary for the 4xx port. It also adds some better (hopefully) output to the kernel log which should help diagnose problems and makes better use of existing OF parsing helpers (avoiding a few bugs of both implementations along the way). There are still a few unfortunate ifdef's but there is no way around these for now at least not until some other bits of the PCI code are made common. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Make isa_mem_base common to 32 and 64 bitsBenjamin Herrenschmidt
This defines isa_mem_base on both 32 and 64 bits (it used to be 32 bits only). This avoids a few ifdef's in later patches and potentially can allow support for VGA text mode on 64 bits powerpc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Don't special case pci_domain_nr() for iSeriesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Inline pci_setup_pci_controller as it has become trivialStephen Rothwell
and it becomes clear that we should use zalloc_maybe_bootmem. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] Remove redundant declaration of hose_listStephen Rothwell
It is already declared in ppc-pci.h which is included. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] Make global_phb_number staticStephen Rothwell
since it's not used outside of arch/powerpc/kernel/pci-common.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Use alloc_maybe_bootmem() in pcibios_alloc_controllerLinas Vepstas
Use alloc_maybe_bootmem() which wraps the if (mem_init_done) malloc clause. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26Merge branch 'fixes-2.6.23' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge