aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2008-12-29powerpc/44x: Support 16K/64K base page sizes on 44xIlya Yanok
This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-29powerpc: Force memory size to be a multiple of PAGE_SIZEHollis Blanchard
Ensure that total memory size is page-aligned, because otherwise mark_bootmem() gets upset. This error case was triggered by using 64 KiB pages in the kernel while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory by 4096 (to work around a chip bug that affects the last 256 bytes of physical memory). Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc/32: Wire up the trampoline code for kdumpDale Farnsworth
Wire up the trampoline code for ppc32 to relay exceptions from the vectors at address 0 to vectors at address 32MB, and modify Kconfig to enable Kdump support for all classic powerpcs. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32MDale Farnsworth
Add the ability for a classic ppc kernel to be loaded at an address of 32MB. This done by fixing a few places that assume we are loaded at address 0, and by changing several uses of KERNELBASE to use PAGE_OFFSET, instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc/32: Setup OF properties for kdumpDale Farnsworth
Refactor the setting of kdump OF properties, moving the common code from machine_kexec_64.c to machine_kexec.c where it can be used on both ppc64 and ppc32. This will be needed for kdump to work on ppc32 platforms. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()Anton Vorontsov
This replaces the dummy crash_setup_regs function with full-fledged crash_setup_regs implementation. On PPC32 we simply use the new ppc_save_regs function to dump the registers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc: Prepare xmon_save_regs for use with kdumpAnton Vorontsov
Today the arch/powerpc/xmon/setjmp.S file contains only the xmon_save_regs function. We want to use it for kdump purposes, so let's move the file into arch/powerpc/kernel/ and give the function a more generic name (ppc_save_regs). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc: Make default kexec/crash_kernel ops implicitAnton Vorontsov
This removes the need for each platform to specify default kexec and crash kernel ops, thus effectively adds a working kexec support for most 6xx/7xx/7xxx-based boards. Platforms that can't cope with default ops will explode in some weird way (a hang or reboot is most likely), which means that the board's kexec support should be fixed or blacklisted via dummy _prepare callback returning -ENOSYS. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23powerpc: Setup OF properties for ppc32 kexecDale Farnsworth
Refactor the setting of kexec OF properties, moving the common code from machine_kexec_64.c to machine_kexec.c where it can be used on both ppc64 and ppc32. This is needed for kexec to work on ppc32 platforms. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/44x: 44x TLB doesn't need "Guarded" set for all pagesBenjamin Herrenschmidt
After discussing with chip designers, it appears that it's not necessary to set G everywhere on 440 cores. The various core errata related to prefetch should be sorted out by firmware by disabling icache prefetching in CCR0. We add the workaround to the kernel however just in case oooold firmwares don't do it. This is valid for -all- 4xx core variants. Later ones hard wire the absence of prefetch but it doesn't harm to clear the bits in CCR0 (they should already be cleared anyway). We still leave G=1 on the linear mapping for now, we need to stop over-mapping RAM to be able to remove it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDEDBenjamin Herrenschmidt
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in in the hash code based on some CPU feature bit. We also manipulate _PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places. This changes the logic so that instead, the PTE now contains _PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms that need it. The hash code clears it if the feature bit is not set. It also adds some clean accessors to setup various valid combinations of access flags and change various bits of code to use them instead. This should help having the PTE actually containing the bit combinations that we really want. I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead set it explicitely from the TLB miss. I will ultimately remove it completely as it appears that it might not be needed after all but in the meantime, having it in the TLB miss makes things a lot easier. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Runtime allocation of mmu context maps for nohash CPUsBenjamin Herrenschmidt
This makes the MMU context code used for CPUs with no hash table (except 603) dynamically allocate the various maps used to track the state of contexts. Only the main free map and CPU 0 stale map are allocated at boot time. Other CPU maps are allocated when those CPUs are brought up and freed if they are unplugged. This also moves the initialization of the MMU context management slightly later during the boot process, which should be fine as it's really only needed when userland if first started anyways. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Split low level tlb invalidate for nohash processorsBenjamin Herrenschmidt
Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Add SMP support to no-hash TLB handlingBenjamin Herrenschmidt
This commit moves the whole no-hash TLB handling out of line into a new tlb_nohash.c file, and implements some basic SMP support using IPIs and/or broadcast tlbivax instructions. Note that I'm using local invalidations for D->I cache coherency. At worst, if another processor is trying to execute the same and has the old entry in its TLB, it will just take a fault and re-do the TLB flush locally (it won't re-do the cache flush in any case). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Introduce MMU featuresBenjamin Herrenschmidt
We're soon running out of CPU features and I need to add some new ones for various MMU related bits, so this patch separates the MMU features from the CPU features. I moved over the 32-bit MMU related ones, added base features for MMU type families, but didn't move over any 64-bit only feature yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Split mmu_context handlingBenjamin Herrenschmidt
This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/4xx: Extended DCR support v2Benjamin Herrenschmidt
This adds supports to the "extended" DCR addressing via the indirect mfdcrx/mtdcrx instructions supported by some 4xx cores (440H6 and later). I enabled the feature for now only on AMCC 460 chips. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert sysfs cache code to of_find_next_cache_node()Nathan Lynch
Using the common code means that more complete cache information will provided in sysfs on platforms that don't use the l2-cache property convention. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert cpu_to_l2cache() to of_find_next_cache_node()Nathan Lynch
The smp code uses cache information to populate cpu_core_map; change it to use common code for cache lookup. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add of_find_next_cache_node()Nathan Lynch
We have more than one piece of code that looks up cache nodes manually using the "l2-cache" property. Add a common helper routine which does this and handles ePAPR's "next-level-cache" property as well as powermac. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18Merge branch 'linux-2.6' into nextPaul Mackerras
2008-12-17powerpc/fsl-booke: Fix the miss interrupt restoreDave Liu
The commit e5e774d8833de1a0037be2384efccadf16935675 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda712) MSR: 00021000 <ME> CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-16powerpc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/pseries: Check for GIQ indicator before calling set-indicatorNathan Lynch
Since "Factor out cpu joining/unjoining the GIQ" (b4963255ad5a426f04a0bb15c4315fa4bb40cde9) the WARN_ON in xics_set_cpu_giq() is being triggered during boot on JS20 because the GIQ indicator is not available on that platform. While the warning is harmless and the system runs normally, it's nicer to check for the existence of the indicator before trying to manipulate it. Implement rtas_indicator_present(), which searches the /rtas/rtas-indicators property for the given indicator token, and use this function in xics_set_cpu_giq(). Also use a WARN statement in xics_set_cpu_giq to get better information on failure. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Move smp_hw_index to 32-bit codeNathan Lynch
smp_hw_index isn't used on 64-bit, so move it from smp.c to setup_32.c. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove `have_of' global variableAnton Vorontsov
The `have_of' variable is a relic from the arch/ppc time, it isn't useful nowadays. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-13powerpc/fsl-booke: Fix problem with _tlbil_va being interruptedKumar Gala
An example calling sequence which we did see: copy_user_highpage -> kmap_atomic -> flush_tlb_page -> _tlbil_va We got interrupted after setting up the MAS registers before the tlbwe and the interrupt handler that caused the interrupt also did a kmap_atomic (ide code) and thus on returning from the interrupt the MAS registers no longer contained the proper values. Since we dont save/restore MAS registers for normal interrupts we need to disable interrupts in _tlbil_va to ensure atomicity. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-05powerpc/virtex5: Fix Virtex5 machine check handlingGrant Likely
The 440x5 core in the Virtex5 uses the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-03powerpc/85xx: Add support for SMP initializationKumar Gala
Added 85xx specifc smp_ops structure. We use ePAPR style boot release and the MPIC for IPIs at this point. Additionally added routines for secondary cpu entry and initializtion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: minor head_fsl_booke.S cleanupKumar Gala
Removed unused branch labels Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Better setup of boot page TLB entryTrent Piepho
The initial TLB mapping for the kernel boot didn't set the memory coherent attribute, MAS2[M], in SMP mode. If this code supported booting a secondary processor, which it doesn't yet, but if it did, then when a secondary processor boots, it would probably signal the primary processor by setting a variable called something like __secondary_hold_acknowledge. However, due to the lack of the M bit, the primary processor would not snoop the transaction (even if a transaction were broadcast). If primary CPU's L1 D-cache had a copy, it would not be flushed and the CPU would never see the ack. Which would have resulted in the primary CPU spinning for a long time, perhaps a full second before it gives up, while it would have waited for the ack from the secondary CPU that it wouldn't have been able to see because of the stale cache. The value of MAS2 for the boot page TLB1 entry is a compile time constant, so there is no need to calculate it in powerpc assembly language. Also, from the MPC8572 manual section 6.12.5.3, "Bits that represent offsets within a page are ignored and should be cleared." Existing code didn't clear them, this code does. The same when the page of KERNELBASE is found; we don't need to use asm to mask the lower 12 bits off. In the code that computes the address to rfi from, don't hard code the offset to 24 bytes, but have the assembler figure that out for us. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Add SPE/EFP math emulation for E500v1/v2 processors.Liu Yu
This patch add the handlers of SPE/EFP exceptions. The code is used to emulate float point arithmetic, when MSR(SPE) is enabled and receive EFP data interrupt or EFP round interrupt. This patch has no conflict with or dependence on FP math-emu. The code has been tested by TestFloat. Now the code doesn't support SPE/EFP instructions emulation (it won't be called when receive program interrupt), but it could be easily added. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/ibmebus: Get rid of the IRQ mapping in ibmebus_free_irq()Sebastien Dugue
ibmebus_free_irq() frees the IRQ but does not remove its mapping, which results in stale entries in the map. This fixes it by adding a call to irq_dispose_mapping() in ibmebus_free_irq(). Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in commit b1fceac2 ("x86: remove unnecessary memset and NULL check after alloc_bootmem()"), alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Add sync_*_for_* to dma_opsBecky Bruce
We need to swap these out once we start using swiotlb, so add them to dma_ops. Create CONFIG_PPC_NEED_DMA_SYNC_OPS Kconfig option; this is currently enabled automatically if we're CONFIG_NOT_COHERENT_CACHE. In the future, this will also be enabled for builds that need swiotlb. If PPC_NEED_DMA_SYNC_OPS is not defined, the dma_sync_*_for_* ops compile to nothing. Otherwise, they access the dma_ops pointers for the sync ops. This patch also changes dma_sync_single_range_* to actually sync the range - previously it was using a generous dma_sync_single. dma_sync_single_* is now implemented as a dma_sync_single_range with an offset of 0. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Allow the max stack trace depth to be configuredJohannes Berg
On my screen, when something crashes, I only have space for maybe 16 functions of the stack trace before the information above it scrolls off the screen. It's easy to hack the kernel to print out only that much, but it's harder to remember to do it. This introduces a config option for it so that I can keep the setting in my config. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03powerpc: Add MSR[CE, DE] to the MSR bits we print on show_regs()Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03Merge branch 'merge'Paul Mackerras
2008-12-03powerpc: Fix dma_map_sg() cache flushing on non coherent platformsBenjamin Herrenschmidt
On PowerPC 4xx or other non cache-coherent platforms, we lost the appropriate cache flushing in dma_map_sg() when merging the 32 and 64-bit DMA code (commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d, "powerpc: Merge 32 and 64-bit dma code"). This restores it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-01powerpc: Fix build for 32-bit SMP configsMilton Miller
attr_smt_snooze_delay is only defined for CONFIG_PPC64, so protect the attribute removal with the same condition. This fixes this build error on 32-bit SMP configurations: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c: In function ‘unregister_cpu_online’: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: ‘attr_smt_snooze_delay’ undeclared (first use in this function) /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: (Each undeclared identifier is reported only once /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: for each function it appears in.) Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-01powerpc: Fix system calls on Cell entered with XER.SO=1Paul Mackerras
It turns out that on Cell, on a kernel with CONFIG_VIRT_CPU_ACCOUNTING = y, if a program sets the SO (summary overflow) bit in the XER and then does a system call, the SO bit in CR0 will be set on return regardless of whether the system call detected an error. Since CR0.SO is used as the error indication from the system call, this means that all system calls appear to fail. The reason is that the workaround for the timebase bug on Cell uses a compare instruction. With CONFIG_VIRT_CPU_ACCOUNTING = y, the ACCOUNT_CPU_USER_ENTRY macro reads the timebase, so we end up doing a compare instruction, which copies XER.SO to CR0.SO. Since we were doing this in the system call entry patch after clearing CR0.SO but before saving the CR, this meant that the saved CR image had CR0.SO set if XER.SO was set on entry. This fixes it by moving the clearing of CR0.SO to after the ACCOUNT_CPU_USER_ENTRY call in the system call entry path. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-01powerpc: Fix IRQ assignment for some PCIe devicesAdhemerval Zanella
Currently, some PCIe devices on POWER6 machines do not get interrupts assigned correctly. The problem is that OF doesn't create an "interrupt" property for them. The fix is for of_irq_map_pci to fall back to using the value in the PCI interrupt-pin register in config space, as we do when there is no OF device-tree node for the device. I have verified that this works fine with a pair of Squib-E SAS adapter on a P6-570. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19powerpc: Provide a separate handler for each IPI actionMilton Miller
With the new generic smp call function helpers, I noticed the code in smp_message_recv was a single function call in many cases. While getting the message number from the ipi data is easy, we can reduce the path length by a function and data-dependent switch by registering seperate IPI actions for these simple calls. Originally I left the ipi action array exposed, but then I realized the registration code should be common too. The three users each had their own name array, so I made a fourth to convert all users to use a common one. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19powerpc: Use for_each_node_with_property() in of_irq_map_init()Michael Ellerman
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-13powerpc/44x: Fix 460EX/460GT machine check handlingBenjamin Herrenschmidt
Those cores use the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-11-12Merge branch 'linux-2.6' into nextPaul Mackerras
2008-11-11powerpc: Fix msr check in compat_sys_swapcontextAndreas Schwab
The new context may not be 16-byte aligned, so the real address of the mcontext structure should be read from the uc_regs pointer instead of directly using the (unaligned) uc_mcontext field. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-08powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidatesKumar Gala
The implemetation of _tlbil_pid() on Freescale Book-E cores needs an msync & isync after we flash invalidate the TLBs. This was causing the following oops reported by Sebastian Andrzej Siewior: VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 148k init BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/mm/mmap.c:234 in_atomic():1, irqs_disabled():0 Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c0029480] __might_sleep+0xf0/0x100 [df189e40] [c0070ac0] remove_vma+0x28/0x98 [df189e50] [c0070c1c] exit_mmap+0xec/0x128 [df189e80] [c002d2f4] mmput+0x54/0xec [df189ea0] [c0030b6c] exit_mm+0x10c/0x120 [df189ed0] [c003288c] do_exit+0x1ac/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c BUG: scheduling while atomic: udevd/956/0x10000002 Modules linked in: Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c002ac88] __schedule_bug+0x58/0x6c [df189e40] [c023e6cc] schedule+0xa8/0x4a8 [df189e90] [c002ad6c] __cond_resched+0x38/0x64 [df189ea0] [c023ebc8] _cond_resched+0x3c/0x58 [df189eb0] [c0030e70] put_files_struct+0x90/0xec [df189ed0] [c00328a8] do_exit+0x1c8/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-06powerpc: Eliminate unused do_gtod variablePaul Mackerras
Since we started using the generic timekeeping code, we haven't had a powerpc-specific version of do_gettimeofday, and hence there is now nothing that reads the do_gtod variable in arch/powerpc/kernel/time.c. This therefore removes it and the code that sets it. Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 14:27:42 +0000