aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/mm/mmu_decl.h
AgeCommit message (Collapse)Author
2008-07-09powerpc: Fix problems with 32bit PPC's running with >= 4GB of RAMStefan Roese
This patch enables 32bit PPC's (with 36bit physical address space, e.g. IBM/AMCC PPC44x) to run with >= 4GB of RAM. Mostly its just replacing types (unsigned long -> phys_addr_t). Tested on an AMCC Katmai with 4GB of DDR2. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-30powerpc: Change BAT code to use phys_addr_tBecky Bruce
Currently, the physical address is an unsigned long, but it should be phys_addr_t in set_bat, [v/p]_mapped_by_bat. Also, create a macro that can convert a large physical address into the correct format for programming the BAT registers. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] Rename __initial_memory_limit to __initial_memory_limit_addrKumar Gala
We always use __initial_memory_limit as an address so rename it to be clear. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] Introduce lowmem_end_addr to distinguish from total_lowmemKumar Gala
total_lowmem represents the amount of low memory, not the physical address that low memory ends at. If the start of memory is at 0 it happens that total_lowmem can be used as both the size and the address that lowmem ends at (or more specifically one byte beyond the end). To make the code a bit more clear and deal with the case when the start of memory isn't at physical 0, we introduce lowmem_end_addr that represents one byte beyond the last physical address in the lowmem region. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addrKumar Gala
A number of users of PPC_MEMSTART (40x, ppc_mmu_32) can just always use 0 as we don't support booting these kernels at non-zero physical addresses since their exception vectors must be at 0 (or 0xfffx_xxxx). For the sub-arches that support relocatable interrupt vectors (book-e), it's reasonable to have memory start at a non-zero physical address. For those cases use the variable memstart_addr instead of the #define PPC_MEMSTART since the only uses of PPC_MEMSTART are for initialization and in the future we can set memstart_addr at runtime to have a relocatable kernel. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-20[POWERPC] Fix 8xx build breakage due to _tlbie changesBenjamin Herrenschmidt
My changes to _tlbie to fix 4xx unfortunately broke 8xx build in a couple of places. This fixes it. Spotted by Olof Johansson. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-01[POWERPC] 4xx: Fix 4xx flush_tlb_page()Benjamin Herrenschmidt
On 4xx CPUs, the current implementation of flush_tlb_page() uses a low level _tlbie() assembly function that only works for the current PID. Thus, invalidations caused by, for example, a COW fault triggered by get_user_pages() from a different context will not work properly, causing among other things, gdb breakpoints to fail. This patch adds a "pid" argument to _tlbie() on 4xx processors, and uses it to flush entries in the right context. FSL BookE also gets the argument but it seems they don't need it (their tlbivax form ignores the PID when invalidating according to the document I have). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-06-14[POWERPC] Kill typedef-ed structs for hash PTEs and BATsDavid Gibson
Using typedefs to rename structure types if frowned on by CodingStyle. However, we do so for the hash PTE structure on both ppc32 (where it's called "PTE") and ppc64 (where it's called "hpte_t"). On ppc32 we also have such a typedef for the BATs ("BAT"). This removes this unhelpful use of typedefs, in the process bringing ppc32 and ppc64 closer together, by using the name "struct hash_pte" in both cases. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Remove the dregs of APUS support from arch/powerpcDavid Gibson
APUS (the Amiga Power-Up System) is not supported under arch/powerpc and it's unlikely it ever will be. Therefore, this patch removes the fragments of APUS support code from arch/powerpc which have been copied from arch/ppc. A few APUS references are left in asm-powerpc in .h files which are still used from arch/ppc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Revise PPC44x MMU code for arch/powerpcDavid Gibson
This patch takes the definitions for the PPC44x MMU (a software loaded TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file. It also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a couple of small fixes necessary for the 44x MMU code to build and work properly in arch/powerpc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Cleanup and fix breakage in tlbflush.hDavid Gibson
BenH's commit a741e67969577163a4cfc78d7fd2753219087ef1 in powerpc.git, although (AFAICT) only intended to affect ppc64, also has side-effects which break 44x. I think 40x, 8xx and Freescale Book E are also affected, though I haven't tested them. The problem lies in unconditionally removing flush_tlb_pending() from the versions of flush_tlb_mm(), flush_tlb_range() and flush_tlb_kernel_range() used on ppc64 - which are also used the embedded platforms mentioned above. The patch below cleans up the convoluted #ifdef logic in tlbflush.h, in the process restoring the necessary flushes for the software TLB platforms. There are three sets of definitions for the flushing hooks: the software TLB versions (revised to avoid using names which appear to related to TLB batching), the 32-bit hash based versions (external functions) amd the 64-bit hash based versions (which implement batching). It also moves the declaration of update_mmu_cache() to always be in tlbflush.h (previously it was in tlbflush.h except for PPC64, where it was in pgtable.h). Booted on Ebony (440GP) and compiled for 64-bit and 32-bit multiplatform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Fix 32-bit mm operations when not using BATsBenjamin Herrenschmidt
On hash table based 32 bits powerpc's, the hash management code runs with a big spinlock. It's thus important that it never causes itself a hash fault. That code is generally safe (it does memory accesses in real mode among other things) with the exception of the actual access to the code itself. That is, the kernel text needs to be accessible without taking a hash miss exceptions. This is currently guaranteed by having a BAT register mapping part of the linear mapping permanently, which includes the kernel text. But this is not true if using the "nobats" kernel command line option (which can be useful for debugging) and will not be true when using DEBUG_PAGEALLOC implemented in a subsequent patch. This patch fixes this by pre-faulting in the hash table pages that hit the kernel text, and making sure we never evict such a page under hash pressure. Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org> arch/powerpc/mm/hash_low_32.S | 22 ++++++++++++++++++++-- arch/powerpc/mm/mem.c | 3 --- arch/powerpc/mm/mmu_decl.h | 4 ++++ arch/powerpc/mm/pgtable_32.c | 11 +++++++---- 4 files changed, 31 insertions(+), 9 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-19[PATCH] powerpc: Remove imalloc.hDavid Gibson
asm-ppc64/imalloc.h is only included from files in arch/powerpc/mm. We already have a header for mm local definitions, arch/powerpc/mm/mmu_decl.h. Thus, this patch moves the contents of imalloc.h into mmu_decl.h. The only exception are the definitions of PHBS_IO_BASE, IMALLOC_BASE and IMALLOC_END. Those are moved into pgtable.h, next to similar definitions of VMALLOC_START and VMALLOC_SIZE. Built for multiplatform 32bit and 64bit (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Merge arch/ppc64/mm to arch/powerpc/mmPaul Mackerras
This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06powerpc: Merge lmb.c and make MM initialization use it.Paul Mackerras
This also creates merged versions of do_init_bootmem, paging_init and mem_init and moves them to arch/powerpc/mm/mem.c. It gets rid of the mem_pieces stuff. I made memory_limit a parameter to lmb_enforce_memory_limit rather than a global referenced by that function. This will require some small changes to ppc64 if we want to continue building ARCH=ppc64 using the merged lmb.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>