aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/oprofile
AgeCommit message (Collapse)Author
2009-05-15powerpc: Fix oprofile sampling of marked events on POWER7Maynard Johnson
Description ----------- Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on older processors where those bits are defined. Background ---------- The performance monitor unit of the 64-bit POWER processor family has the ability to collect accurate instruction-level samples when profiling on marked events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA register contained "slot information" that the oprofile kernel driver used to adjust the value latched in the SIAR at the time of a PMU interrupt. But as of POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use, since the SIAR itself holds the accurate sampled instruction address. With POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of these slot bits was, in effect, a NOP. But with POWER7, these bits are no longer zero'ed out; however, they serve some other purpose rather than slot information. Thus, using these bits on POWER7 to adjust the SIAR value results in samples being attributed to the wrong instructions. The attached patch changes the oprofile kernel driver to ignore these slot bits on all newer processors starting with POWER6. Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11powerpc/oprofile: G4 oprofile has variable number of countersOctavian Purdila
For ppc750 processors which use 4 performance counters instead of the 6 G4 uses but otherwise is compatible with G4. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc/cell: Add missing #include for oprofileMichael Neuling
arch/powerpc/oprofile/cell/spu_profiler.c is missing a asm/time.h include which is required for ppc_proc_freq. This can cause compile failures for some config combinations. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-13powerpc: Change u64/s64 to a long long integer typeIngo Molnar
Convert arch/powerpc/ over to long long based u64: -#ifdef __powerpc64__ -# include <asm-generic/int-l64.h> -#else -# include <asm-generic/int-ll64.h> -#endif +#include <asm-generic/int-ll64.h> This will avoid reoccuring spurious warnings in core kernel code that comes when people test on their own hardware. (i.e. x86 in ~98% of the cases) This is what x86 uses and it generally helps keep 64-bit code 32-bit clean too. [Adjusted to not impact user mode (from paulus) - sfr] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (31 commits) powerpc/oprofile: fix whitespaces in op_model_cell.c powerpc/oprofile: IBM CELL: add SPU event profiling support powerpc/oprofile: fix cell/pr_util.h powerpc/oprofile: IBM CELL: cleanup and restructuring oprofile: make new cpu buffer functions part of the api oprofile: remove #ifdef CONFIG_OPROFILE_IBS in non-ibs code ring_buffer: fix ring_buffer_event_length() oprofile: use new data sample format for ibs oprofile: add op_cpu_buffer_get_data() oprofile: add op_cpu_buffer_add_data() oprofile: rework implementation of cpu buffer events oprofile: modify op_cpu_buffer_read_entry() oprofile: add op_cpu_buffer_write_reserve() oprofile: rename variables in add_ibs_begin() oprofile: rename add_sample() in cpu_buffer.c oprofile: rename variable ibs_allowed to has_ibs in op_model_amd.c oprofile: making add_sample_entry() inline oprofile: remove backtrace code for ibs oprofile: remove unused ibs macro oprofile: remove unused components in struct oprofile_cpu_buffer ...
2009-01-08powerpc/oprofile: fix whitespaces in op_model_cell.cRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/oprofile: IBM CELL: add SPU event profiling supportCarl Love
This patch adds the SPU event based profiling funcitonality for the IBM Cell processor. Previously, the CELL OProfile kernel code supported PPU event, PPU cycle profiling and SPU cycle profiling. The addition of SPU event profiling allows the users to identify where in their SPU code various SPU evnets are occuring. This should help users further identify issues with their code. Note, SPU profiling has some limitations due to HW constraints. Only one event at a time can be used for profiling and SPU event profiling must be time sliced across all of the SPUs in a node. The patch adds a new arch specific file to the OProfile file system. The file has bit 0 set to indicate that the kernel supports SPU event profiling. The user tool must check this file/bit to make sure the kernel supports SPU event profiling before trying to do SPU event profiling. The user tool check is part of the user tool patch for SPU event profiling. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/oprofile: fix cell/pr_util.hRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/oprofile: IBM CELL: cleanup and restructuringCarl Love
This patch restructures and cleans up the code a bit to make it easier to add new functionality later. The patch makes no functional changes to the existing code. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/cell: Fix the prototype of create_vma_map()Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-12-31shrink struct dentryNick Piggin
struct dentry is one of the most critical structures in the kernel. So it's sad to see it going neglected. With CONFIG_PROFILING turned on (which is probably the common case at least for distros and kernel developers), sizeof(struct dcache) == 208 here (64-bit). This gives 19 objects per slab. I packed d_mounted into a hole, and took another 4 bytes off the inline name length to take the padding out from the end of the structure. This shinks it to 200 bytes. I could have gone the other way and increased the length to 40, but I'm aiming for a magic number, read on... I then got rid of the d_cookie pointer. This shrinks it to 192 bytes. Rant: why was this ever a good idea? The cookie system should increase its hash size or use a tree or something if lookups are a problem. Also the "fast dcookie lookups" in oprofile should be moved into the dcookie code -- how can oprofile possibly care about the dcookie_mutex? It gets dropped after get_dcookie() returns so it can't be providing any sort of protection. At 192 bytes, 21 objects fit into a 4K page, saving about 3MB on my system with ~140 000 entries allocated. 192 is also a multiple of 64, so we get nice cacheline alignment on 64 and 32 byte line systems -- any given dentry will now require 3 cachelines to touch all fields wheras previously it would require 4. I know the inline name size was chosen quite carefully, however with the reduction in cacheline footprint, it should actually be just about as fast to do a name lookup for a 36 character name as it was before the patch (and faster for other sizes). The memory footprint savings for names which are <= 32 or > 36 bytes long should more than make up for the memory cost for 33-36 byte names. Performance is a feature... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-31powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling ↵Carl Love
function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). This could potentially cause an oops or random memory corruption since the pm_signal_local array is on the stack. This fixes it. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-23Merge branch 'v28-range-hrtimers-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) hrtimers: add missing docbook comments to struct hrtimer hrtimers: simplify hrtimer_peek_ahead_timers() hrtimers: fix docbook comments DECLARE_PER_CPU needs linux/percpu.h hrtimers: fix typo rangetimers: fix the bug reported by Ingo for real rangetimer: fix BUG_ON reported by Ingo rangetimer: fix x86 build failure for the !HRTIMERS case select: fix alpha OSF wrapper select: fix alpha OSF wrapper hrtimer: peek at the timer queue just before going idle hrtimer: make the futex() system call use the per process slack value hrtimer: make the nanosleep() syscall use the per process slack hrtimer: fix signed/unsigned bug in slack estimator hrtimer: show the timer ranges in /proc/timer_list hrtimer: incorporate feedback from Peter Zijlstra hrtimer: add a hrtimer_start_range() function hrtimer: another build fix hrtimer: fix build bug found by Ingo hrtimer: make select() and poll() use the hrtimer range feature ...
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits) OProfile: Fix buffer synchronization for IBS oprofile: hotplug cpu fix oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in drivers/oprofile/* x86/oprofile: add the logic for enabling additional IBS bits x86/oprofile: reordering functions in nmi_int.c x86/oprofile: removing unused function parameter in add_ibs_begin() oprofile: more whitespace fixes oprofile: whitespace fixes OProfile: Rename IBS sysfs dir into "ibs_op" OProfile: Rework string handling in setup_ibs_files() OProfile: Rework oprofile_add_ibs_sample() function oprofile: discover counters for op ppro too oprofile: Implement Intel architectural perfmon support oprofile: Don't report Nehalem as core_2 oprofile: drop const in num counters field Revert "Oprofile Multiplexing Patch" x86, oprofile: BUG: using smp_processor_id() in preemptible code x86/oprofile: fix on_each_cpu build error ... Manually fixed trivial conflicts in drivers/oprofile/{cpu_buffer.c,event_buffer.h}
2008-10-21powerpc/oprofile: Fix mutex locking for cell spu-oprofileCarl Love
The issue is the SPU code is not holding the kernel mutex lock while adding samples to the kernel buffer. This patch creates per SPU buffers to hold the data. Data is added to the buffers from in interrupt context. The data is periodically pushed to the kernel buffer via a new Oprofile function oprofile_put_buff(). The oprofile_put_buff() function is called via a work queue enabling the funtion to acquire the mutex lock. The existing user controls for adjusting the per CPU buffer size is used to control the size of the per SPU buffers. Similarly, overflows of the SPU buffers are reported by incrementing the per CPU buffer stats. This eliminates the need to have architecture specific controls for the per SPU buffers which is not acceptable to the OProfile user tool maintainer. The export of the oprofile add_event_entry() is removed as it is no longer needed given this patch. Note, this patch has not addressed the issue of indexing arrays by the spu number. This still needs to be fixed as the spu numbering is not guarenteed to be 0 to max_num_spus-1. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Acked-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-17Merge commit 'linus/master' into merge-linusArjan van de Ven
Conflicts: arch/x86/kvm/i8254.c
2008-10-15oprofile: more whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-10powerpc/cell/oprofile: Fix test on overlay_tbl_offset in vma_mapRoel Kluin
Offset is unsigned and when an address isn't found in the vma map vma_map_lookup() returns the vma physical address + 0x10000000. vma_map_lookup used to return 0xffffffff on a failed lookup, but a change was made to return the vma physical address + 0x10000000 There are two callers of vam_map_lookup: one of them correctly deals with this new return value, but the other (below) did not. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-09-05hrtimer: convert powerpc/oprofile to the new hrtimer apisArjan van de Ven
In order to be able to do range hrtimers we need to use accessor functions to the "expire" member of the hrtimer struct. This patch converts powerpc/oprofile to these accessors. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-08-20powerpc: Expose PMCs & cache topology in sysfs on 32-bitBenjamin Herrenschmidt
The file arch/powerpc/kernel/sysfs.c is currently only compiled for 64-bit kernels. It contain code to register CPU sysdevs in sysfs and add various properties such as cache topology and raw access by root to performance monitor counters (PMCs). A lot of that can be re-used as is on 32-bits. This makes the file be built for both, with appropriate ifdef'ing for the few bits that are really 64-bit specific, and adds some support for the raw PMCs for 75x and 74xx processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-26on_each_cpu(): kill unused 'retry' parameterJens Axboe
It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-14Merge branch 'linux-2.6'Paul Mackerras
2008-04-01[POWERPC] Replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-30vma_map: use proper pointer typesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-03[POWERPC] OProfile: enable callgraph support for CellBob Nelson
This patch enables OProfile callgraph support for the Cell processor. The original code was just calling a function to add the PC value, now it will call a function that first checks the callgraph depth. Callgraph is already enabled on the other Power platforms. Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-02-14d_path: Make get_dcookie() use a struct path argumentJan Blunck
get_dcookie() is always called with a dentry and a vfsmount from a struct path. Make get_dcookie() take it directly as an argument. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05[POWERPC] Made FSL Book-E PMC support more genericAndy Fleming
Some of the more recent e300 cores have the same performance monitor implementation as the e500. e300 isn't book-e, so the name isn't really appropriate. In preparation for e300 support, rename a bunch of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-31Merge branch 'linux-2.6'Paul Mackerras
2008-01-28remove __attribute_used__Adrian Bunk
Remove the deprecated __attribute_used__. [Introduce __section in a few places to silence checkpatch /sam] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-12-19[POWERPC] OProfile: fix cbe pm signal routing problemBob Nelson
Fix debug_bus_control and group_control PMU register values set up in set_pm_event(). Initialize variables before calling set_pm_event(). Delete unused static array and code that initialized it. Rename constant to better reflect usage. Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-10-19Combine instrumentation menus in kernel/Kconfig.instrumentationMathieu Desnoyers
Quoting Randy: "It seems sad that this patch sources Kconfig.marker, a 7-line file, 20-something times. Yes, you (we) don't want to put those 7 lines into 20-something different files, so sourcing is the right thing. However, what you did for avr32 seems more on the right track to me: make _one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES, and MARKERS and then use (source) that in all of the arches." Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09[POWERPC] cell: Move cbe_regs.h to include/asm-powerpc/cell-regs.hBenjamin Herrenschmidt
The new Cell EDAC driver needs that file, oprofile also does ugly path tricks to get to it, it's time to move it to asm-powerpc. While at it, rename it to be consistent with cell-pmu.h (and dashes look nicer than underscores anyway). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-29Remove fs.h from mm.hAlexey Dobriyan
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20[CELL] oprofile: add support to OProfile for profiling CELL BE SPUsBob Nelson
From: Maynard Johnson <mpjohn@us.ibm.com> This patch updates the existing arch/powerpc/oprofile/op_model_cell.c to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code. Exports spu_set_profile_private_kref and spu_get_profile_private_kref which are used by OProfile to store private profile information in spufs data structures. Also incorporated several fixes from other patches (rrn). Check pointer returned from kzalloc. Eliminated unnecessary cast. Better error handling and cleanup in the related area. 64-bit unsigned long parameter was being demoted to 32-bit unsigned int and eventually promoted back to unsigned long. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] Oprofile enhanced instruction sampling supportwill schmidt
Oprofile enhanced instruction sampling support. When performing instruction sampling, the mmcra[SLOT] field can be used to more accurately identify the address of the sampled instruction. Tested on power4, js20, power5 and power5+. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-09Fix misspellings collected by members of KJ list.Robert P. J. Day
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-04-30[POWERPC] Spinlock initializer cleanupThomas Gleixner
Use DEFINE_SPINLOCK instead of initializing spinlocks to SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: PA6T oprofile supportOlof Johansson
Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-23[POWERPC] cell: add cbe_node_to_cpu functionChristian Krafft
This patch adds code to deal with conversion of logical cpu to cbe nodes. It removes code that assummed there were two logical CPUs per CBE. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13[POWERPC] cell: pm_rtas_activat_signals routine cleanupMaynard Johnson
The code was setting up the debug bus for group 21 when profiling on the event PPU CYCLES. The debug bus is not actually used by the hardware performance counters when counting PPU CYCLES. Setting up the debug bus for PPU CYCLES causes signal routing conflicts on the debug bus when profiling PPU cycles and another PPU event. This patch fixes the code to only setup the debug bus to route the performance signals for the non PPU CYCLE events. Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13[POWERPC] cell: PPU Oprofile cleanup patchCarl Love
This is a clean up patch that includes the following changes: -Some comments were added to clarify the code based on feedback from the community. -The write_pm_cntrl() and set_count_mode() were passed a structure element from a global variable. The argument was removed so the functions now just operate on the global directly. -The set_pm_event() function call in the cell_virtual_cntr() routine was moved to a for-loop before the for_each_cpu loop Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-07[POWERPC] Oprofile cleanupOlof Johansson
Clean up the ctr_read/write a bit. It's currently defined in the include but only used in one C file each. The only exception is the classic version, so keep that in the include and define in the C file as appropriate. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24[POWERPC] Fix oprofile support on Cell LPARIshizaki Kou
Op_model_cell supports native Cell. By returning -EINVAL, oprofile uses timer interrupt on Cell LPAR. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] ps3: multiplatform build fixesArnd Bergmann
A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] cell: Add oprofile supportMaynard Johnson
Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Fix oprofile support for e500 in arch/powerpcAndy Fleming
Fixed a compile error in building the 85xx support with oprofile, and in the process cleaned up some issues with the fsl_booke performance monitor code. * Reorganized FSL Book-E performance monitoring code so that the 7450 wouldn't be built if the e500 was, and cleaned it up so it was more self-contained. * Added a cpu_setup function for FSL Book-E. The original cpu_setup function prototype had no arguments, assuming that the reg_setup function would copy the required information into variables which represented the registers. This was silly for e500, since it has 1 register per counter (rather than 3 for all counters), so the code has been restructured to have cpu_setup take the current counter config array as an argument, with op_powerpc_setup() invoking op_powerpc_cpu_setup() through on_each_cpu(), and op_powerpc_cpu_setup() invoking the model-specific cpu_setup function with an argument. The argument is ignored on all other platforms at present. * Fixed a confusing line where a trinary operator only had two arguments Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23[POWERPC] Add 970GX cputable entryJake Moilanen
970GX cputable entry from Steve Winiecki. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> arch/powerpc/kernel/cputable.c | 15 +++++++++++++++ arch/powerpc/oprofile/op_model_power4.c | 2 +- include/asm-powerpc/reg.h | 1 + 3 files changed, 17 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-26[POWERPC] powerpc oprofile __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>