aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/ps3
AgeCommit message (Collapse)Author
2008-09-24powerpc: Drop archdata numa_nodeBecky Bruce
Use the struct device's numa_node instead; use accessor functions to get/set numa_node. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26powerpc/ps3: Fix ioremap of spu shadow regsMasakazu Mokuno
Fix the ioremap of the spu shadow regs on the PS3. The current PS3 hypervisor requires the spu shadow regs to be mapped with the PTE page protection bits set as read-only (PP=3). This implementation uses the low level __ioremap() to bypass the page protection settings inforced by ioremap_flags() to get the needed PTE bits set for the shadow regs. This fixes a runtime failure on the PS3 introduced by the powerpc ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83 ("powerpc ioremap_prot"). Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26powerpc/ps3: Rework htab code to remove ioremapMasakazu Mokuno
Rework the PS3 MMU hash table code to remove the need to ioremap the hash table by using the HV calls lv1_insert_htab_entry() and lv1_read_htab_entries(). This fixes a runtime failure on the PS3 introduced by the powerpc ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83 ("powerpc ioremap_prot"). Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-22powerpc/ps3: Add a sub-match id to ps3_system_busMasakazu Mokuno
Add sub match id for ps3 system bus so that two different system bus devices can be connected to a shared device. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-16powerpc: pci config cleanupJohn Rigby
Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16Merge commit 'origin/master'Benjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/kernel/stacktrace.c arch/powerpc/mm/slice.c arch/ppc/kernel/smp.c
2008-07-09powerpc/dma: implement new dma_*map*_attrs() interfacesMark Nelson
Update powerpc to use the new dma_*map*_attrs() interfaces. In doing so update struct dma_mapping_ops to accept a struct dma_attrs and propagate these changes through to all users of the code (generic IOMMU and the 64bit DMA code, and the iseries and ps3 platform code). The old dma_*map_*() interfaces are reimplemented as calls to the corresponding new interfaces. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-09powerpc/ps3: Quiet system bus match outputGeoff Levand
Reduce the output verbosity of ps3_system_bus_match(). Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-06-26powerpc: convert to generic helpers for IPI function callsJens Axboe
This converts ppc to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). ppc loses the timeout functionality of smp_call_function_mask() with this change, as the generic code does not provide that. Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-23[POWERPC] PS3: Fix memory hotplugGeoff Levand
A change was made to walk_memory_resource() in commit 4b119e21d0c66c22e8ca03df05d9de623d0eb50f that added a check of find_lmb(). Add the coresponding lmb_add() call to ps3_mm_add_memory() so that that check will succeed. This fixes the condition where the PS3 boots up with only the 128 MiB of boot memory, and doesn't see the other 128MiB that is available. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02[POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy staticGeert Uytterhoeven
The routines ps3_virq_setup() and ps3_virq_destroy() are used in only one file, so make them static. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] Add include of linux/of.h to os-area.cMichael Ellerman
os-area.c requires routines declared in linux/of.h, so should include it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01[POWERPC] Replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01[POWERPC] PS3: Split device setup for static vs. dynamic devicesGeert Uytterhoeven
Split the device setup code in ps3_register_repository_device() in two routines: 1. ps3_setup_static_device(), to handle the setup of static devices in the PS3 repository, which can be __init, 2. ps3_setup_dynamic_device(), to handle the setup of storage devices that may appear later in the PS3 repository. This fixes a few section mismatch warnings. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01[POWERPC] PS3: Save power in busy loops on haltGeert Uytterhoeven
PS3 save power on halt: - Replace infinite busy loops by smarter loops calling lv1_pause() to save power. - Add ps3_halt() and ps3_sys_manager_halt(). - Add __noreturn annotations. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01[POWERPC] PS3: Add ps3_get_speid routineTakashi Yamamoto
Add a new routine ps3_get_speid() which returns the logical SPE ID. This ID is needed for profiling support. Signed-off-by: Takashi Yamamoto <TakashiA.Yamamoto@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01[POWERPC] PS3: Fix unlikely typo in ps3_get_irqRoel Kluin
Fix a typo bug 'unlikely(x) == y' and add an unlikely() call to an unlikely code path in the PS3 interrupt routine ps3_get_irq(). Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-13[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-25[POWERPC] PS3: Remove lpar address workaroundGeoff Levand
Remove the PS3 workaround needed to support sparsemem SPU mappings. The SPU mappings no longer use sparsemem, so this workaround is no longer needed. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add logical performance monitor driver supportTakashi Yamamoto
Add PS3 logical performance monitor (lpm) device driver. The PS3's LV1 hypervisor provides a Logical Performance Monitor that abstracts the Cell processor's performance monitor features for use by guest operating systems. Signed-off-by: Takashi Yamamoto <TakashiA.Yamamoto@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add logical performance monitor device supportGeoff Levand
Add PS3 logical performance monitor device support to the PS3 system-bus and platform device registration routines. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add logical performance monitor repository routinesTakashi Yamamoto
Add repository routines for the PS3 Logical Performance Monitor. Signed-off-by: Takashi Yamamoto <TakashiA.Yamamoto@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Checkpatch cleanups for arch/powerpc/platforms/ps3/repository.cGeert Uytterhoeven
Cleanup coding errors in arch/powerpc/platforms/ps3/repository.c as reported by sparse and checkpatch. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Refactor ps3_repository_find_device()Geert Uytterhoeven
PS3: Refactor ps3_repository_find_device() to use the existing ps3_repository_read_bus_id() routine. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Kill unused ps3_repository_bump_device()Geert Uytterhoeven
PS3: Kill unused routine ps3_repository_bump_device(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add repository polling loop to work around timing bugGeert Uytterhoeven
PS3: Add repository polling loop to work around timing bug On some firmware versions (e.g. 1.90), the storage device may not show up in the repository immediately after receiving the notification message. Add a small polling loop to make sure we don't miss it. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Use the HVs storage device notification mechanism properlyGeert Uytterhoeven
The PS3 hypervisor has a storage device notification mechanism to wait until a storage device is ready. Unfortunately the storage device probing code used this mechanism in an incorrect way, needing a polling loop and handling of devices that are not yet ready. This change corrects this by: - First waiting for the reception of an asynchronous notification that a new storage device became ready, - Then looking up the storage device in the device repository. On shutdown, the storage probe thread is stopped and the storage notification device is closed using a reboot notifier. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add ps3_repository_find_device_by_id()Geert Uytterhoeven
The storage probe feature of the PS3 hypervisor returns device IDs. Add the corresponding repository routine ps3_repository_find_device_by_id() which can be used to retrieve the device info from the repository. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Make bus_id and dev_id u64Geert Uytterhoeven
Change the PS3 bus_id and dev_id from type unsigned int to u64. These IDs are 64-bit in the repository, and the special storage notification device has a device ID of ULONG_MAX. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24Merge branch 'linux-2.6'Paul Mackerras
2007-12-28[POWERPC] PS3: Fix printing of os-area magic numbersGeoff Levand
Fix a bug in the printing of the os-area magic numbers which assumed that magic numbers were zero terminated strings. The magic numbers are represented in memory as integers. If the os-area sections are not initialized correctly they could contained random data that would be printed to the display. Also unify the handling of header and db magic numbers and make both of type array of u8. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21Merge branch 'linux-2.6'Paul Mackerras
2007-12-21[POWERPC] cell: wrap master run control bitMasato Noguchi
Add platform specific SPU run control routines to the spufs. The current spufs implementation uses the SPU master run control bit (MFC_SR1[S]) to control SPE execution, but the PS3 hypervisor does not support the use of this feature. This change adds the run control wrapper routies spu_enable_spu() and spu_disable_spu(). The bare metal routines use the master run control bit, and the PS3 specific routines use the priv2 run control register. An outstanding enhancement for the PS3 would be to add a guard to check for incorrect access to the spu problem state when the spu context is disabled. This check could be implemented with a flag added to the spu context that would inhibit mapping problem state pages, and a routine to unmap spu problem state pages. When the spu is enabled with ps3_enable_spu() the flag would be set allowing pages to be mapped, and when the spu is disabled with ps3_disable_spu() the flag would be cleared and mapped problem state pages would be unmapped. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-14[POWERPC] Make PS3_SYS_MANAGER default y, not mMichael Ellerman
Currently it's impossible to build a ps3_defconfig which will reboot without modules installed. This makes it all too easy to find yourself with a PS3 that won't reboot. This is because the system manager driver, which provides the reboot mechanism, is only selectable if PS3_ADVANCED is set, else it defaults to m. In ps3_defconfig PS3_ADVANCED is not set, therefore the system manager is built as a module. It would be desirable IMHO for the defconfig to produce a kernel that boots and reboots, without needing modules to be installed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-22Update arch/ to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16PS3: sg chaining supportJens Axboe
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-15PS3 system bus add_uevent_var() falloutGeert Uytterhoeven
Kill unused variables Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12[POWERPC] Use 1TB segmentsPaul Mackerras
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: Add os-area database routinesGeoff Levand
Add support for a simple tagged database in the PS3 flash rom os-area. The database allows the flash rom os-area to be shared between a bootloader and installed operating systems. The application ps3-flash-util or the library libps3-utils from the ps3-utils package can be used for userspace database operations. The latest ps3-utils package is available here: git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-utils.git Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: Save os-area params to device treeGeoff Levand
Add the PS3 os-area startup params to the device tree. This allows a second stage kernel loaded with kexec to use these values. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: Add os-area rtc_diff set/get routinesGeoff Levand
Updates for PS3 os-area rtc_diff set/get routines o Add a new routine ps3_os_area_set_rtc_diff(). o Rename ps3_os_area_rtc_diff() to ps3_os_area_get_rtc_diff(). o Remove static variable rtc_shift with calls to ps3_os_area_get_rtc_diff(). Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: os-area workqueue processingGeoff Levand
Add a workqueue to the PS3 os-area support. This is needed to support writing updates to flash memory and to update the /proc device tree entries from the timer tick interrupt context. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: Remove unused os-area paramsGeoff Levand
Updates for PS3 os-area startup params o Remove some unused PS3 os-area startup params from struct saved_params. o Rename ps3_os_area_init() to ps3_os_area_save_params(). o Zero mirrored header after saving params. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09[POWERPC] PS3: Cleanup of os-area.cGeoff Levand
Minor cleanup of the PS3 file os-area.c: o Correct file text header. o Add type names enum os_area_ldr_format, enum os_area_boot_flag, enum os_area_ctrl_button. o Change struct os_area_header.magic_num type to u8. o Add preprocessor macro SECONDS_FROM_1970_TO_2000. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] PS3: Enhance storage probe debug outputGeoff Levand
Add some more info to the PS3 storage probe debug output. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] PS3: Fix CONFIG_SMP=n, CONFIG_KEXEC=y buildJeremy Kerr
Currently, the ps3 kernel fails to build without smp but with kexec, as ps3_kexec_cpu_down needs ps3_smp_cleanup_cpu, which isn't defined on UP kernels. This change adds an empty ps3_smp_cleanup_cpu for UP kernels. Booted on ps3. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Invert null match behaviour for irq_hostsMichael Ellerman
Currently if you don't specify a match callback for your irq_host it's assumed you match everything. This is a kind of opt-out approach, and turns out to be the exception rather than the rule. So change the semantics to be opt-in, ie. you don't match anything unless you provide a match callback. This in itself isn't very useful, but will allow us to provide a default match implementation in a subsequent patch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add an optional device_node pointer to the irq_hostMichael Ellerman
The majority of irq_host implementations (3 out of 4) are associated with a device_node, and need to stash it somewhere. Rather than having it somewhere different for each host, add an optional device_node pointer to the irq_host structure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Ignore storage devices that are still being probedGeert Uytterhoeven
On PS3, A storage device may show up in the repository before the hypervisor has finished probing: - If its type is not yet known, it shows up as PS3_DEV_TYPE_STOR_DUMMY, - If its regions are being probed, it shows up as having zero regions. If any of these happen, consider the device not yet present. The storage probe thread will retry later. This fixes the timing-dependent problem where a kernel booted from FLASH ROM sometimes cannot find the hard disk. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 10:34:40 +0000