aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev/fsl_pci.c
AgeCommit message (Collapse)Author
2008-01-23[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xxKumar Gala
The current PCI code for Freescale 85xx/86xx was treating the virtual P2P PCIe bridge as a transparent bridge. Rather than doing that fixup the virtual P2P bridge by copying the resources from the PHB. Also, fixup a bit of the code for dealing with resource_size_t being 64-bits and how we set ATMU registers for >4G. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-20[POWERPC] pci32: Add flags modifying the PCI code behaviourBenjamin Herrenschmidt
This adds to the 32 bits PCI code some flags, replacing the old pci_assign_all_busses global, that allow us to control various aspects of the PCI probing, such as whether to re-assign all resources or not, or to not try to assign anything at all. This also adds the flag x86 already has to avoid ISA alignment on bridges that don't have ISA forwarding enabled (no legacy devices on the top level bus) and sets it for PowerMacs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] Add missing spaces in printk formatsjoe@perches.com
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16[POWERPC] Add missing semicolon for fsl_pci.cTony Li
Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] FSL: Access PCIe LTSSM register with correct sizeKumar Gala
The LTSSM register is actual 32-bits wide so we should be doing a dword access. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08[POWERPC] Treat 8610 PCIe host bridge as transparentJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS portKumar Gala
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-21[POWERPC] Fix PCI Device ID for MPC8544/8533 processorsKumar Gala
The initial user manuals for MPC8544/8533 had some issues with properly documenting the device IDs for MPC8544/8533. These processors are almost identical and both show up on the reference boards. Fix up the quirks for PCIe support to handle MPC8533/E. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWREPC] Fixup a number of modpost warnings on ppc32Kumar Gala
Fixed the following warnings: WARNING: vmlinux.o(.text+0x2934): Section mismatch: reference to .init.text:__alloc_bootmem (between 'irq_alloc_host' and 'irq_set_default_host') WARNING: vmlinux.o(.text+0xb2aa): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf') WARNING: vmlinux.o(.text+0xb2b2): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf') WARNING: vmlinux.o(.text+0xe354): Section mismatch: reference to .init.text:__alloc_bootmem (between 'pcibios_alloc_controller' and 'pci_domain_nr') WARNING: vmlinux.o(.text+0x12768): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config') WARNING: vmlinux.o(.text+0x127a8): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config') WARNING: vmlinux.o(.text+0x17566c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bus_parented') Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-25[POWERPC] Fix PCI indirect for big-endian cfg_addrKumar Gala
We didn't actually propogate the flag we pass into setup_indirect_pci() to set indirect_type and thus were getting the wrong endianness if PPC_INDIRECT_TYPE_BIG_ENDIAN was set. Also, we need to or in additional flags rather than just doing a direct assignment. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xx: Added needed MPC85xx PCI device IDsKumar Gala
Added the MPC85xx PCI device IDs that we need for the quirks we have. Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDsJon Loeliger
Also add 8641/8641D device IDs as well. All of which already exist or have been submitted to The Linux PCI ID Repository at: http://pci-ids.ucw.cz/ CC-to: pci-ids@ucw.cz Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] FSL: Add support for PCI-X controllersKumar Gala
Some set of 85xx platforms have PCI-X controllers. The old arch/ppc code setup these controllers and we haven't moved it over to arch/powerpc. We use the PCI-X Capabilties to know if we are in PCI-X mode instead of the Global Utilities PORDEVSR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHBKumar Gala
For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P bridge registers properly. Make sure they get setup based on what the struct pci_controller got from the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connectedKumar Gala
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Use Freescale pci/pcie common code for 85xx boardsRoy Zang
Switch the 85xx platform over to using the FSL generic PCI code. This gets ups PCIe support in addition to base PCI support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] FSL: Cleanup how we detect if we are a PCIe controllerKumar Gala
Use the PCI capabilities to determine if we are PCIe PHB. Also use PPC_INDIRECT_TYPE_NO_PCIE_LINK since the Freescale PCIe controllers will lock the system if they don't have link and you try to do a config access to anything but the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xxZang Roy-r61911
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and PCIe on 85xx/86xx. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Create common fsl pci/e files based on 86xx platformsRoy Zang
Move arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h as the base to unify 83xx/85xx/86xx pci and pcie. Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option. The code still works for 86xx platforms. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>