aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2009-06-06powerpc/virtex: Add support for Xilinx PCI host bridgeRoderick Colenbrander
This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-02powerpc/pci: Fix annotation of pcibios_claim_one_busStephen Rothwell
It was __devinit, but it is also within a CONFIG_HOTPLUG guarded section of code, so the __devinit does nothing but cause the following warning: WARNING: vmlinux.o(.text+0x107a8): Section mismatch in reference from the function pcibios_finish_adding_to_bus() to the function .devinit.text:pcibios_claim_one_bus() The function pcibios_finish_adding_to_bus() references the function __devinit pcibios_claim_one_bus(). This is often because pcibios_finish_adding_to_bus lacks a __devinit annotation or the annotation of pcibios_claim_one_bus is wrong. It is also only (externally) used in arch/powerpc/kernel/of_platform.c which cannot be built as a module so don't export it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc/ftrace: Use PPC_INST_NOP directlyMichael Ellerman
There's no need to wrap PPC_INST_NOP in a static inline. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc/ftrace: Remove unused macrosMichael Ellerman
These macros were used in the original port, but since commit e4486fe316 (ftrace, use probe_kernel API to modify code) they are unused. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc/ftrace: Use ppc_function_entry() instead of GET_ADDRMichael Ellerman
Use ppc_function_entry() from code-patching.h. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc: Display processor virtualization resource allocs in lparcfgNathan Fontenot
This patch updates the output from /proc/ppc64/lparcfg to display the processor virtualization resource allocations for a shared processor partition. This information is already gathered via the h_get_ppp call, we just have to make sure that the ibm,partition-performance-parameters-level property is >= 1 to ensure that the information is valid. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc: Convert RTAS event scan from kernel thread to workqueueAnton Blanchard
RTAS event scan has to run across all cpus. Right now we use a kernel thread and set_cpus_allowed but in doing so we wake up the previous cpu unnecessarily. Some ftrace output shows this: previous cpu (2): [002] 7.022331: sched_switch: task swapper:0 [140] ==> rtasd:194 [120] [002] 7.022338: sched_switch: task rtasd:194 [120] ==> migration/2:9 [0] [002] 7.022344: sched_switch: task migration/2:9 [0] ==> swapper:0 [140] next cpu (3): [003] 7.022345: sched_switch: task swapper:0 [140] ==> rtasd:194 [120] [003] 7.022371: sched_switch: task rtasd:194 [120] ==> swapper:0 [140] We can use schedule_delayed_work_on and avoid the unnecessary wakeup. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc: Make the NR_CPUS max 8192Michael Neuling
We can compile and boot with NR_CPUS=8192, so make this the max. 1024 was an arbitrary decision anyway. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-29Merge branch 'merge' into nextBenjamin Herrenschmidt
2009-05-27powerpc: Fix up dma_alloc_coherent() on platforms without cache coherency.Benjamin Herrenschmidt
The implementation we just revived has issues, such as using a Kconfig-defined virtual address area in kernel space that nothing actually carves out (and thus will overlap whatever is there), or having some dependencies on being self contained in a single PTE page which adds unnecessary constraints on the kernel virtual address space. This fixes it by using more classic PTE accessors and automatically locating the area for consistent memory, carving an appropriate hole in the kernel virtual address space, leaving only the size of that area as a Kconfig option. It also brings some dma-mask related fixes from the ARM implementation which was almost identical initially but grew its own fixes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27powerpc: Minor cleanups of kernel virt address space definitionsBenjamin Herrenschmidt
Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27powerpc: Move dma-noncoherent.c from arch/powerpc/lib to arch/powerpc/mmBenjamin Herrenschmidt
(pre-requisite to make the next patches more palatable) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27Revert "powerpc: Rework dma-noncoherent to use generic vmalloc layer"Benjamin Herrenschmidt
This reverts commit 33f00dcedb0e22cdb156a23632814fc580fcfcf8. While it was a good idea to try to use the mm/vmalloc.c allocator instead of our own (in fact, ours is itself a dup on an old variant of the vmalloc one), unfortunately, the approach is terminally busted since dma_alloc_coherent() can be called at interrupt time or in atomic contexts and there's little chances we'll make the code in mm/vmalloc.c cope with\ that :-( Until we can get the generic code to forbid that idiocy and fix all drivers abusing it, we pretty much have no choice but revert to our custom virtual space allocator. There's also a problem with SMP safety since freeing such mapping would require an IPI which cannot be done at interrupt time. However, right now, I don't think we support any platform that is both SMP and has non-coherent DMA (don't laugh, I know such things do exist !) so we can sort that out later. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-26powerpc/mm: Fix broken MMU PID stealing on !SMPHideo Saito
The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: Hideo Saito <hsaito.ppc@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-22powerpc/maple: Add a quirk to disable MSI for IPR on BiminiMichael Ellerman
Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: clean up direct access to sysdata by iseries platformKumar Gala
We shouldn't directly access sysdata to get the device node. We should be calling pci_device_to_OF_node(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Keep track of emulated instructionsGeert Uytterhoeven
If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the various classes of emulated instructions under /sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on /sys/kernel/debug). Optionally (controlled by /sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings can be printed to the console when instructions are emulated. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/xmon: Add dl command to dump contents of __log_bufVinay Sridhar
Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Use sg->dma_length in sg_dma_len() macro on 32-bitBecky Bruce
Currently, the 32-bit code uses sg->length instead of sg->dma_lentgh to report sg_dma_len. However, since the default dma code for 32-bit (the dma_direct case) sets dma_length and length to the same thing, we should be able to use dma_length there as well. This gets rid of some 32-vs-64-bit ifdefs, and is needed by the swiotlb code which actually distinguishes between dma_length and length. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/spufs: Remove double check for non-negative dentryJan Blunck
This patch removes an unnecessary double check if the dentry returned by lookup_create() is actually non-negative. Since lookup_create() itself returns an error in this case just remove the check. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Improve decrementer accuracyAnton Blanchard
I have been looking at sources of OS jitter and notice that after a long NO_HZ idle period we wakeup too early: relative time (us) event timer irq exit 999946.405 timer irq entry 4.835 timer irq exit 21.685 timer irq entry 3.540 timer (tick_sched_timer) entry Here we slept for just under a second then took a timer interrupt that did nothing. 21.685 us later we wake up again and do the work. We set a rather low shift value of 16 for the decrementer clockevent, which I think is causing this issue. On this box we have a 207MHz decrementer and see: clockevent: decrementer mult[3501] shift[16] cpu[0] For calculations of large intervals this mult/shift combination could be off by a significant amount. I notice the sparc code has a loop that iterates to find a mult/shift combination that maximises the shift value while keeping mult under 32bit. With the patch below we get: clockevent: decrementer mult[35015c20] shift[32] cpu[15] And we no longer see the spurious wakeups. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Remove redundant pcnet32 fixupKumar Gala
The pcnet32 driver has had in its device id table for some time a match against the "broken" vendor ID. No need to fake out the vendor ID with an explicit fixup. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Cleanup some minor cruftKumar Gala
* Removed building setup-irq on ppc32, we don't use it anymore * Remove duplicate prototype for setup_grackle() code that needs it gets it from <asm/grackle.h> * Removed gratuitous pci_io_size type differences between ppc32/ppc64 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Move pseries code into pseries platform specific areaKumar Gala
There doesn't appear to be any specific reason that we need to setup the pseries specific notifier in generic arch pci code. Move it into pseries land. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by celleb platformsKumar Gala
We shouldn't directly access sysdata to get the device node to just go get the pci_controller. We can call pci_bus_to_host() for this purpose. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by RTASKumar Gala
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by powermac platformsKumar Gala
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata on tsi108 platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by CHRP platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by 4xx platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by 52xx platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by FSL platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by indirect opsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Add 2.06 tlbie mnemonicsMilton Miller
This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards compatibilty for CPUs before 2.06. Only useful for bare metal systems. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Enable MMU feature sections for inline asmMilton Miller
powerpc: Enable MMU feature sections for inline asm This adds the ability to do MMU feature sections for inline asm. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Move VSX load/stores into ppc-opcode.hMichael Neuling
Cleans up the VSX load/store instructions by moving them into ppc-opcode.h. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Cleanup macros in ppc-opcode.hMichael Neuling
Make macros more braces happy. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Fix up elf_read_implies_exec() usageKumar Gala
We believe if a toolchain supports PT_GNU_STACK that it sets the proper PHDR permissions. Therefor elf_read_implies_exec() should only be true if we don't see PT_GNU_STACK set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/irq: We don't need __do_IRQ() anymoreMichael Ellerman
So select GENERIC_HARDIRQS_NO__DO_IRQ to disable it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/powermac: Use generic_handle_irq() in gatwick_action()Michael Ellerman
Don't call __do_IRQ() directly in gatwick_action(), use generic_handle_irq(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/irq: Remove fallback to __do_IRQ()Michael Ellerman
We should no longer have any irq code that needs __do_IRQ(), so remove the fallback to __do_IRQ(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/irq: Move get_irq() comment into headerMichael Ellerman
The guts of do_IRQ() isn't really the right place to be documenting the ppc_md.get_irq() interface. So move the comment into machdep.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/irq: Move stack overflow check into a separate functionMichael Ellerman
Makes do_IRQ() shorter and clearer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/irq: Move #ifdef'ed body of do_IRQ() into a separate functionMichael Ellerman
Rather than a giant ifdef in the body of do_IRQ(), including a dangling else, move the irq stack logic into a separate routine and do the ifdef there. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/ps3: Use smp_request_message_ipiGeoff Levand
ps3 has 4 ipis per cpu and can use the new smp_request_message_ipi to reduce path length when receiving an ipi. This has the side effect of setting IRQF_PERCPU. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pseries: CMO unused page hintingRobert Jennings
Adds support for the "unused" page hint which can be used in shared memory partitions to flag pages not in use, which will then be stolen before active pages by the hypervisor when memory needs to be moved to LPARs in need of additional memory. Failure to mark pages as 'unused' makes the LPAR slower to give up unused memory to other partitions. This adds the kernel parameter 'cmo_free_hint' to disable this functionality. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/mpic: Cleanup mpic_find() implementationTony Breeds
mpic_find() was overloaded to do two things, finding the mpic instance for a given interrupt and returning if it's an IPI. Instead we introduce mpic_is_ipi() and simplify mpic_find() to just return the mpic instance Also silences the warning: arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority': arch/powerpc/sysdev/mpic.c:1382: warning: 'is_ipi' may be used uninitialized in this function Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Update Warp to use leds-gpio driverSean MacLennan
Now that leds-gpio is a proper OF platform driver, the Warp can use the leds-gpio driver rather than the old out-of-kernel driver. One side-effect is the leds-gpio driver always turns the leds off while the old driver left them alone. So we have to set them back to the correct settings. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-19powerpc/fsl: Setup PCI inbound window based on actual amount of memoryKumar Gala
Previouslly we just always set the inbound window to 2G. This was broken for systems with >2G. If a system has >=4G we will need SWIOTLB support to handle that case. We now allocate PCICSRBAR/PEXCSRBAR right below the lowest PCI outbound address for MMIO or the 4G boundary (if the lowest PCI address is above 4G). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: Add P2020DS board supportKumar Gala
The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: Ted Peters <Ted.Peters@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>