aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2007-05-02[POWERPC] pseries: Handle null iommu dma-window property correctlyLinas Vepstas
Some versions of pSeries firmware fail to set up a dma-window property for PCI slots that are unoccupied. As a result, the loop searching for this propery, in pci_dma_dev_setup_pSeriesLP(), can run to the end, resulting in a NULL pointer dereference later in the routine. This patch prevents the crash, and prints a warning message. This is theoretically a rare error, as it occurs on what is hopefully just beta levels of firmware. But just in case this firmware escapes into the wild, this patch will avoid the crash. Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
2007-05-02[POWERPC] powermac: Fix G5-cpufreq for cpu on/offlineJohannes Berg
The original code here is wrong, it applies "previous" knowledge. The way the cpufreq core is designed is that the policy for the secondary CPU that comes online says that it must in fact not use this policy but use the same as the other CPUs that are listed, which in fact is CPU#0. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] apm_emu: Use generic apm-emulationJohannes Berg
This patch removes a huge amount of code that is now in common code in drivers/char/apm-emulation.c Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platformsZang Roy-r61911
Remove loops_per_jiffy early initialization code for 7448HPC2 platforms. Since udelay no longer uses loops_per_jiffy it is not necessary to initialize it early. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove unneeded page_is_ram exportJohannes Berg
arch/powerpc/mm/mem.c exports page_is_ram, which is not used anywhere that could be modular. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Move of_irq_to_resource from prom.h to prom_parse.cMathieu Desnoyers
In the powerpc architecture, of_irq_to_resource, currently sitting in prom.h, needs irq_of_parse_and_map and NO_IRQ from asm-powerpc/irq.h. The solution suggested by Benjamin Herrenschmidt is to move it to arch/powerpc/kernel/prom_parse.c. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30Merge branch 'for-2.6.22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits) [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c [POWERPC] remove kernel module option for booke wdt [POWERPC] Avoid putting cpu node twice [POWERPC] Spinlock initializer cleanup [POWERPC] ppc4xx_sgdma needs dma-mapping.h [POWERPC] arch/powerpc/sysdev/timer.c build fix [POWERPC] get_property cleanups [POWERPC] Remove the unused HTDMSOUND driver [POWERPC] cell: cbe_cpufreq cleanup and crash fix [POWERPC] Declare enable_kernel_spe in a header [POWERPC] Add dt_xlate_addr() to bootwrapper [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards. [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files [POWERPC] Add uartlite boot console driver for the zImage wrapper [POWERPC] Stop using ppc_sys for Xilinx Virtex boards [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices [POWERPC] Merge common virtex header files [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform [POWERPC] Clean up cpufreq Kconfig dependencies ...
2007-04-30Merge branch 'linux-2.6' into for-2.6.22Paul Mackerras
2007-04-30[POWERPC] Avoid putting cpu node twiceJohn Rigby
Call of_find_node_by_type with NULL instead of np so the cpu node does not get put twice. This was causing kref_put warnings. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Spinlock initializer cleanupThomas Gleixner
Use DEFINE_SPINLOCK instead of initializing spinlocks to SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] arch/powerpc/sysdev/timer.c build fixSrinivasa Ds
arch/powerpc/sysdev/timer.c:51: error: variable `timer_sysclass' has initializer but incomplete type arch/powerpc/sysdev/timer.c:52: error: unknown field `resume' specified in initializer <etc> Signed-off-by: Srinivasa Ds <srinivasa@in.ibm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] get_property cleanupsStephen Rothwell
Just another pass through arch/powerpc for old usages. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] cell: cbe_cpufreq cleanup and crash fixOlof Johansson
cbe_cpufreq cleanups: * comment format * whitespace * don't init on non-cell platforms Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Add dt_xlate_addr() to bootwrapperMark A. Greer
dt_xlate_reg() looks up the 'reg' property in the specified node to get the address and size to translate. Add dt_xlate_addr() which is passed in the address and size to translate. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREEScott Wood
A usage of CONFIG_DEVICE_TREE got accidentally truncated; this fix allows out-of-tree dts files to work. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Clean up cpufreq Kconfig dependenciesOlof Johansson
Shuffle Kconfig order, making the platform drivers menu depend on the global option instead of each driver being dependent on it. Also fix dependency of PPC_PMAC on the G5 one. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30Revert "[POWERPC] Autodetect serial console on efika"Paul Mackerras
This reverts commit 9414715a7bbb45450015e9bc2676d85d919d08d4, at Olaf Hering's request: > Paul, please discard this patch. The optional graphics card may have > also device_type 'serial' if it is in VGA mode. > I will send an updated patch later.
2007-04-28ucc_geth: Implement Transmit on Demand supportMichael Reiss
Transmit on Demand: Fix spelling in config option, and make it actually enable TOD. Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com> Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27powerpc: make it compile for multithread changeAndrew Morton
arch/powerpc/kernel/of_platform.c:479: error: unknown field `multithread_probe' specified in initializer Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27[POWERPC] Generic check_legacy_ioportOlaf Hering
check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: cuboot-83xx: Exclude upper 1MB from heap.Scott Wood
The uppermost part of memory is where u-boot puts the stack, so don't include that in the heap. It's not currently causing problems, as the current code allocates from the bottom of the heap, but this will keep things from potentially breaking if a future implementation were to allocate from the top. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: cuImage for 85xxScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: Fix array handling in dt_xlate_reg().Scott Wood
This fixes a few bugs in how dt_xlate_reg() handles address arrays: 1. copy_val() was copying into the wrong end of the array, resulting in random stack garbage at the other end. 2. dt_xlate_reg() was getting the result from the wrong end of the array. 3. add_reg() and sub_reg() were treating the arrays as little-endian rather than big-endian. 4. add_reg() only returned an error on a carry out of the entire array, rather than out of the naddr portion. 5. The requested reg resource was checked to see if it exceeded the size of the reg property, but not to see if it exceeded the size of the buffer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] boot: More verbose gunzip error messageMilton Miller
Change the error message in gunzip_exactly to be more verbose. Besides the identifier being unrelated to the current function name, the user had no indication if the corruption was near the beginning or the end. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Enable make installAkinobu Mita
make help on powerpc says make install is available. But it failed due to no rule to make install. This patch enables make install to work. Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Always use -mno-stringBenjamin Herrenschmidt
The string load/store instructions are unimplemented on some processors and slow (microcoded) on some others. It's simplest to just not use them at all. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Fix WARN_ON when entering xmonAnton Blanchard
Whenever we enter xmon we get a WARN_ON out of the rtas code since it thinks interrupts are still on: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd000000000080008 cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00] pc: d000000000080008: .doit+0x8/0x40 [oopser] lr: c000000000077704: .sys_init_module+0x1664/0x1824 sp: c0000000075dbc80 msr: 9000000000009032 dar: 0 dsisr: 42000000 current = 0xc000000003fa64b0 paca = 0xc000000000694280 pid = 2260, comm = insmod ------------[ cut here ]------------ Badness at arch/powerpc/kernel/entry_64.S:651 Call Trace: [C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable) [C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8 [C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584 [C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100 Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Replace if-then-else with a switch statementWill Schmidt
Convert a compound if-else blob to a switch statement. This better fits the kernel coding style. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] pasemi: Cpufreq driverOlof Johansson
Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] pasemi: Kconfig for gpio_mdioOlof Johansson
arch/powerpc/platforms/pasemi/gpio_mdio.c really depends on CONFIG_PHYLIB. Add a config option for it, allow for it to be disabled if needed and fix the dependency. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] pasemi: Remove build warningOlof Johansson
arch/powerpc/platforms/pasemi/setup.c: In function 'pasemi_publish_devices': arch/powerpc/platforms/pasemi/setup.c:220: warning: implicit declaration of function 'of_platform_bus_probe' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-26Revert "[POWERPC] DMA 4GB boundary protection"Paul Mackerras
This reverts commit 618d3adc351a24c4c48437c767befb88ca2d199d, because it is superseded by 569975591c5530fdc9c7a3c45122e5e46f075a74.
2007-04-26[STRING]: Move strcasecmp/strncasecmp to lib/string.cDavid S. Miller
We have several platforms using local copies of identical code. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24[POWERPC] pci_32.c: Switch to ref counting PCI APIAlan Cox
pci_find_slot isn't hot-plug safe. Move this code to the pci hotplug safe equivalent and hold a refcount properly while doing make_one_node_map. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Abolish PHYS_FMT macro from arch/powerpcDavid Gibson
32-bit powerpc systems define a macro, PHYS_FMT, giving a printf format string fragment for displaying physical addresses, since most 32-bit powerpc platforms use 32-bit physical addresses but a few use 64-bit physical addresses. This macro is used in exactly one place, a rare error message, where we can solve the problem more simply by just unconditionally casting the address up to 64-bit quantity before formatting it. This patch does so, meaning that as we bring MMU definitions from asm-ppc over to asm-powerpc, cleaning them up in the process, we don't need to implement this ugly macro (which additionally has a very bad name for something global). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_devicesStephen Rothwell
Replace uses with of_find_node_by_name and for_each_node_by_name. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_type_devicesStephen Rothwell
Replaced by of_find_node_by_type. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_path_deviceStephen Rothwell
Replaced by of_find_node_by_path. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove find_all_nodesStephen Rothwell
This old interface has no more users. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove find_compatible_devicesStephen Rothwell
This is an old interface and is replaced by of_find_compatible_node. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Cleanup and fix breakage in tlbflush.hDavid Gibson
BenH's commit a741e67969577163a4cfc78d7fd2753219087ef1 in powerpc.git, although (AFAICT) only intended to affect ppc64, also has side-effects which break 44x. I think 40x, 8xx and Freescale Book E are also affected, though I haven't tested them. The problem lies in unconditionally removing flush_tlb_pending() from the versions of flush_tlb_mm(), flush_tlb_range() and flush_tlb_kernel_range() used on ppc64 - which are also used the embedded platforms mentioned above. The patch below cleans up the convoluted #ifdef logic in tlbflush.h, in the process restoring the necessary flushes for the software TLB platforms. There are three sets of definitions for the flushing hooks: the software TLB versions (revised to avoid using names which appear to related to TLB batching), the 32-bit hash based versions (external functions) amd the 64-bit hash based versions (which implement batching). It also moves the declaration of update_mmu_cache() to always be in tlbflush.h (previously it was in tlbflush.h except for PPC64, where it was in pgtable.h). Booted on Ebony (440GP) and compiled for 64-bit and 32-bit multiplatform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Save trap number in bad_stackOlof Johansson
Save the trap number in the case of getting a bad stack in an exception handler. It is sometimes useful to know what exception it was that caused this to happen. Without this, no trap number is reported. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Fix comment typo in Kurobox device treeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Use `unsigned long' for malloc sizesGeert Uytterhoeven
Use `unsigned long' for malloc sizes, to match common practice and types used by most callers and callees. Also use `unsigned long' for integers representing pointers in simple_alloc. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controllerDavid Gibson
This patch adds a driver to arch/powerpc/sysdev for the UIC, the on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new irq host mapping infrastructure. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Re-organize Kconfig code for 4xx in arch/powerpcDavid Gibson
Now that we always take a device tree in arch/powerpc, there's no good reason not to allow a single kernel to support multiple embedded 4xx boards - the correct platform code can be selected based on the device tree information. Therefore, this patch re-arranges the 4xx Kconfig code to allow this. In addition we: - use "select" instead of depends to configure the correct config options for specific 4xx CPUs and workarounds, which makes the information about specific boards and CPUs less scattered. - Some old, unused (in arch/powerpc) config options are removed: WANT_EARLY_SERIAL, IBM_OCP, etc. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] kprobes: Eliminate sstep exception if instruction can be emulatedAnanth N Mavinakayanahalli
For cases when probes are placed on instructions that can be emulated, don't take the single-step exception. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Emulate more instructions in softwareAnanth N Mavinakayanahalli
Emulate a few more instructions in software - especially useful during singlestepping (xmon/kprobes). Instructions emulated with this patch are mfcr/mtcr rX, mfxer/mtxer rX, mflr/mtlr rX, mfctr/mtctr rX and mr rA,rB. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: cuboot for 83xxScott Wood
This adds cuboot support for MPC83xx platforms. A device tree used with this must have linux,stdout-path in /chosen and linux,network-index in any network device nodes that need mac addresses assigned. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 00:43:11 +0000