aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-02-06calibrate_delay() must be __cpuinitAdrian Bunk
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06taskstats scaled time cleanupMichael Neuling
This moves the ability to scale cputime into generic code. This allows us to fix the issue in kernel/timer.c (noticed by Balbir) where we could only add an unscaled value to the scaled utime/stime. This adds a cputime_to_scaled function. As before, the POWERPC version does the scaling based on the last SPURR/PURR ratio calculated. The generic and s390 (only other arch to implement asm/cputime.h) versions are both NOPs. Also moves the SPURR and PURR snapshots closer. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06[POWERPC] Xilinx: Update compatible to use values generated by BSP generator.Stephen Neuendorffer
Mainly, this involves two changes: 1) xilinx->xlnx (recognized standard is to use the stock ticker) 2) In order to have the device tree focus on describing what the hardware is as exactly as possible, the compatible strings contain the full IP name and IP version. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
2008-02-06[POWERPC] arch/powerpc/platforms/82xx: Add missing of_node_putJulia Lawall
Of_get_parent and of_find_compatible_node do a of_node_get, and thus a corresponding of_code_put is needed in both the error case and the normal return case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] arch/powerpc/sysdev: Add missing of_node_putJulia Lawall
The functions of_find_compatible_node and of_find_node_by_type both call of_node_get on their result. So any error handling code thereafter should call of_node_put(np). This is taken care of in the case where there is a goto out, but not when there is a direct return. The function irq_alloc_host puts np into the returned structure, which is stored in the global variable mpc8xx_pic_host, so the reference count should be set for the lifetime of that variable. The current solution ups the reference count again in the argument to irq_alloc_host so that it can be decremented on the way out. This seems a bit unnecessary, and also doesn't work in the case where irq_alloc_host fails, because then the reference count only goes does by one, whereas it should go down by two. A better solution is to not increment the reference count in the argument to irq_alloc_host and only decrement it on the way out in an error case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] arch/powerpc/platforms/pseries: Add missing of_node_putJulia Lawall
Of_get_parent and of_find_compatible_node do an of_node_get, and thus a corresponding of_code_put is needed in the error case. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = \(of_get_parent\|of_find_compatible_node\)(...); if (E == NULL) S ... when != of_node_put(...,(T1)E,...) when != if (E != NULL) { ... of_node_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != of_node_put(...,(T2)E,...) when != if (E != NULL) { ... of_node_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-05[POWERPC] 85xx: Add second cpu to 8572 dtsKumar Gala
The 8572 is a dual core processor, not reason not to describe both cores in the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] qe_lib: fix few fluffy negligencesAnton Vorontsov
One is intoduced by me (of_node_put() absence) and another was present already (not checking for NULL). Found by Stephen Rothwell. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Update mpc83xx_defconfigKim Phillips
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] FSL: fix mpc83xx_spi device registrationKim Phillips
calling platform_device_register after platform_device_alloc causes this: kobject (c3841a70): tried to init an initialized object, something is seriously wrong. Call Trace: [c381fe20] [c0007bb8] show_stack+0x3c/0x194 (unreliable) [c381fe50] [c01322a8] kobject_init+0xb8/0xbc [c381fe60] [c01591cc] device_initialize+0x30/0x9c [c381fe80] [c015ee34] platform_device_register+0x1c/0x34 [c381fea0] [c02f1fe0] of_fsl_spi_probe+0x21c/0x22c [c381ff30] [c02f2044] fsl_spi_init+0x54/0x160 [c381ff60] [c02f3924] __machine_initcall_mpc832x_rdb_mpc832x_spi_init+0x120/0x138 [c381ff70] [c02e61b4] kernel_init+0x98/0x284 [c381fff0] [c000f740] kernel_thread+0x44/0x60 fixed by calling platform_device_add (second half of platform_device_register) instead. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: mpc832x_rdb: fix compiler warningKim Phillips
arch/powerpc/platforms/83xx/mpc832x_rdb.c: In function ‘mpc832x_rdb_setup_arch’: arch/powerpc/platforms/83xx/mpc832x_rdb.c:104: warning: ‘np’ is used uninitialized in this function Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC} Add oprofile support for e300Andy Fleming
The e300 c3 and c4 variants support hardware performance monitor counters which are identical to those found in the e500. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] Made FSL Book-E PMC support more genericAndy Fleming
Some of the more recent e300 cores have the same performance monitor implementation as the e500. e300 isn't book-e, so the name isn't really appropriate. In preparation for e300 support, rename a bunch of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] Fix storcenter DTS typos, feedback, IRQs.Jon Loeliger
Cleaned up IRQ layout and removed unsused ISU allocations. Fixed RTC address typo from /dts-v1/ conversion. Incorporated list suggestions to use an "iomega," vendor prefix, and to use a node reference rather than a hard path. Signed-off-by: Jon Loeliger <jdl@@jdl.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dtsBryan O'Donoghue
cpm_uart_core has a dependency on fsl,cpm-brg/clock-frequency, this means that a .dts that uses the cpm uart driver needs to supply a clock-frequency entry for get_brgfreq to return a meaningful number. Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Add rtc node to mpc8313erdb dtsKim Phillips
The 8313 rdb has a ds1339 at address 0x68. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-06[POWERPC] update_mmu_cache: Don't cache-flush non-readable pagesScott Wood
Currently, update_mmu_cache will crash if given a no-access PTE. There's no need to synchronize dcache/icache unless it's an exec mapping -- however, due to the existence of older glibc versions that execute out of a read-but-no-exec page, readability is tested instead. This assumes no exec-only mappings; if such mappings become supported, they will need to go through the kmap_atomic() version of dcache/icache synchronization. This fixes a bug reported by some users where the kernel would crash while dumping core on a threaded program. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Fix legacy serial search for opb bus portsMichael Ellerman
The patch to legacy_serial.c (1a7507c7da2df6856e085e0fbb0c9ea8c12ac4e, Reduce code duplication in legacy_serial, add UART parent types) changed the semantics for opb ports from type = "opb" || compatible = "ibm,opb" to type = "opb" && compatible = "ibm,opb". The result is serial ports on our QS21s (Cell blades) don't get found, and for some reason the machine doesn't boot at all - possibly it's panicking due to lack of a console? The fix is to add two entries to the of_device_id table, one that looks for type = "opb" and the other compatible = "ibm,opb". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Use a sensible default for clock_getres() in the VDSOTony Breeds
This ensures that the syscall and the (fast) vdso versions of clock_getres() will return the same resolution. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] iSeries: Fix section mismatch in viodsasdStephen Rothwell
WARNING: vmlinux.o(.text+0x3017c): Section mismatch in reference from the function .vio_create_viodasd() to the function .devinit.text:.vio_register_device_node() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Avoid possible extra of_node_put in axon_msi.cStephen Rothwell
I got this warning from gcc: arch/powerpc/platforms/cell/axon_msi.c:118: warning: 'tmp' may be used uninitialized in this function Which turns out to be a false positive, but pointed out that it was possible for the error path in find_msi_translator() to do an extra of_node_put on a node. This fixes it by localising the ref counting a bit. As a side effect, the warning goes away. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Avoid DMA exception when using axon_msi with IOMMUMichael Ellerman
There's a brown-paper-bag bug in axon_msi, we pass the address of our FIFO directly to the hardware, without DMA mapping it. This leads to DMA exceptions if you enable MSI & the IOMMU. The fix is to correctly DMA map the fifo, dma_alloc_coherent() does what we want - and we need to track the virt & phys addresses. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Convert axon_msi to an of_platform driverMichael Ellerman
Now that we create of_platform devices earlier on cell, we can make the axon_msi driver an of_platform driver. This makes the code cleaner in several ways, and most importantly means we have a struct device. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Search for and publish cell OF platform devices earlierMichael Ellerman
Currently cell publishes OF devices at device_initcall() time, which means the earliest a driver can bind to a device is also device_initcall() time. We have a driver we want to register before other devices, so publish the devices at subsys_initcall() time. This should not cause any behaviour change for existing drivers, as they are still bound at device_initcall() time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-05[POWERPC] 8xx: adder875, ep88xc: fix to match recent 8xx cleanups.Scott Wood
asm/commproc.h was renamed to asm/cpm1.h sysdev/commproc.h was renamed to platforms/8xx/mpc8xx.h m8xx_pic_init was renamed to mpc8xx_pics_init Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dtsKim Phillips
According to the 8349EA ref man, the second PCI PHB IRQ is 67. Thanks to Peter Van Ackeren for finding this. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-06[POWERPC] spufs: Fix memory leak on SPU affinityAndre Detsch
Reference count for the "neighbor" spu context was not being correctly decremented after usage. So, contexts used as reference during SPU affinity setup were not being deallocated, leading to a memory leak. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] spufs: Fix SPE single-step modeJeremy Kerr
Currently we only catch debug events through the 0x3fff status; spufs_run_spu doesn't handle single-step SPE events. This change adds a handler for conditions where the SPE is stopped due to single-step-mode. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] spufs: Add marker-based tracing facilityChristoph Hellwig
This adds markers two important points in the spufs code and a new module (sputrace.ko) that allows reading these out through a proc file. Long-term I'd rather see something like lttng extended to use the spufs instrumentation, but for now I think this is a good enough quick solution. We'll probably want to add various addition event in addition to that ones I have already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-05[POWERPC] 83xx: configure USB clock for MPC8315EKim Phillips
SCCR USB bits are in a different location on the mpc8315. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg: powerpc: remove DMA 4GB boundary protectionFUJITA Tomonori
Previously, during initialization of the IOMMU tables, the last entry at each 4GB boundary is marked as used since there are many adapters which cannot handle DMAing across any 4GB boundary. The IOMMU doesn't allocate a memory area spanning LLD's segment boundary anymore. The segment boundary of devices are set to 4GB by default. So we can remove 4GB boundary protection now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg: powerpc: convert iommu to use the IOMMU helperFUJITA Tomonori
This patch converts PPC's IOMMU to use the IOMMU helper functions. The IOMMU doesn't allocate a memory area spanning LLD's segment boundary anymore. iseries_hv_alloc and iseries_hv_map don't have proper device struct. 4GB boundary is used for them. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg merging: ppc: make iommu respect the segment size limitsFUJITA Tomonori
This patch makes iommu respect segment size limits when merging sg lists. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03Move Kconfig.instrumentation to arch/Kconfig and init/KconfigMathieu Desnoyers
Move the instrumentation Kconfig to arch/Kconfig for architecture dependent options - oprofile - kprobes and init/Kconfig for architecture independent options - profiling - markers Remove the "Instrumentation Support" menu. Everything moves to "General setup". Delete the kernel/Kconfig.instrumentation file. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03Add HAVE_KPROBESMathieu Desnoyers
Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config KPROBES_SUPPORT def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... - Use HAVE_KPROBES - Use a select - Yet another update : Moving to HAVE_* now. - Update ARM for kprobes support. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03Add HAVE_OPROFILEMathieu Desnoyers
Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config ARCH_SUPPORTS_KPROBES def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... Changelog : - Moving to HAVE_*. - Add AVR32 oprofile. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-01Suspend: Add config option to disable the freezer if architecture wants thatJohannes Berg
This patch makes the freezer optional for suspend to allow the system to work (or not work) like the original PMU suspend. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Suspend: Introduce begin() and end() callbacksRafael J. Wysocki
On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails.  All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful.  Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Suspend: Clean up Kconfig (V2)Johannes Berg
This cleans up the suspend Kconfig and removes the need to declare centrally which architectures support suspend. All architectures that currently support suspend are modified accordingly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Hibernation: Clean up Kconfig (V2)Johannes Berg
This cleans up the hibernation Kconfig and removes the need to declare centrally which architectures support hibernation. All architectures that currently support hibernation are modified accordingly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01pasemi: Fix thinko in dma_direct_ops setupOlof Johansson
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31POWERPC: Set dma_data correctly for direct_ops on pasemiOlof Johansson
More late-caught fallout from the mainline merge. Commit 35e4a6e26d0c6bc7f32087db61f0fb3666531183 ("[POWERPC] Use archdata.dma_data in dma_direct_ops and add the offset") claimed "Now that all platforms using dma_direct_offset setup the archdata.dma_data correctly, ..." ..but nope -- the pasemi iommu setup code that disables translation on the DMA pci device didn't set dma_data correctly. This fixes it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31Merge branch 'for-2.6.25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits) [POWERPC] Cell IOMMU fixed mapping support [POWERPC] Split out the ioid fetching/checking logic [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup() [POWERPC] Split cell_iommu_setup_hardware() into two parts [POWERPC] Split out the logic that allocates struct iommus [POWERPC] Allocate the hash table under 1G on cell [POWERPC] Add set_dma_ops() to match get_dma_ops() [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. [POWERPC] 85xx: Only invalidate TLB0 and TLB1 [POWERPC] 83xx: Fix typo in mpc837x compatible entries [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall [POWERPC] 83xx: rework platform Kconfig [POWERPC] 85xx: rework platform Kconfig [POWERPC] 86xx: Remove unused IRQ defines [POWERPC] QE: Explicitly set address-cells and size cells for muram [POWERPC] Convert StorCenter DTS file to /dts-v1/ format. [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format. [PPC] Remove 85xx from arch/ppc [PPC] Remove 83xx from arch/ppc ...
2008-01-31[POWERPC] Cell IOMMU fixed mapping supportMichael Ellerman
This patch adds support for setting up a fixed IOMMU mapping on certain cell machines. For 64-bit devices this avoids the performance overhead of mapping and unmapping pages at runtime. 32-bit devices are unable to use the fixed mapping. The fixed mapping is established at boot, and maps all of physical memory 1:1 into device space at some offset. On machines with < 30 GB of memory we setup the fixed mapping immediately above the normal IOMMU window. For example a machine with 4GB of memory would end up with the normal IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 3GB, plus any offset required by firmware. The firmware offset is encoded in the "dma-ranges" property. On machines with 30GB or more of memory, we are unable to place the fixed mapping above the normal IOMMU window as we would run out of address space. Instead we move the normal IOMMU window to coincide with the hash page table, this region does not need to be part of the fixed mapping as no device should ever be DMA'ing to it. We then setup the fixed mapping from 0 to 32GB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split out the ioid fetching/checking logicMichael Ellerman
Split out the ioid fetching and checking logic so we can use it elsewhere in a subsequent patch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windowsMichael Ellerman
Add support to cell_iommu_setup_page_tables() for handling two windows, the dynamic window and the fixed window. A fixed window size of 0 indicates that there is no fixed window at all. Currently there are no callers who pass a non-zero fixed window, but the upcoming fixed IOMMU mapping patch will change that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()Michael Ellerman
Split the IOMMU logic out from cell_dma_dev_setup() into a separate function. If we're not using dma_direct_ops or dma_iommu_ops we don't know what the hell's going on, so BUG. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split cell_iommu_setup_hardware() into two partsMichael Ellerman
Split cell_iommu_setup_hardware() into two parts. Split the page table setup into cell_iommu_setup_page_tables() and the bits that kick the hardware into cell_iommu_enable_hardware(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>