aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2007-09-11[POWERPC] ibmebus: Prevent bus_id collisionsJoachim Fenkes
Previously, ibmebus derived a device's bus_id from its location code. The location code is not guaranteed to be unique, so we might get bus_id collisions if two devices share the same location code. The OFDT full_name, however, is unique, so we use that instead (truncating it on the left if it is too long). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Ignore storage devices that are still being probedGeert Uytterhoeven
On PS3, A storage device may show up in the repository before the hypervisor has finished probing: - If its type is not yet known, it shows up as PS3_DEV_TYPE_STOR_DUMMY, - If its regions are being probed, it shows up as having zero regions. If any of these happen, consider the device not yet present. The storage probe thread will retry later. This fixes the timing-dependent problem where a kernel booted from FLASH ROM sometimes cannot find the hard disk. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Always set master run control bit in mfc_sr1_setJeremy Kerr
At present, running any SPE program on the ps3 will trigger a BUG_ON when spufs_run_spu tries to clear the master run control bit, as lv1 does not make the master run control available to Linux. This change makes SPE apps work again by disabling changes to the master run control on PS3. Although we don't have the facility to disable a SPE with supervisor-level privileges, it's better than hitting the BUG_ON unconditionally. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11[POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 ↵Masato Noguchi
interrupt. The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt is edge-triggered. The current spu interrupt handler assumes this behavior and does not clear the interrupt status. The PS3 hypervisor visualizes all SPU interrupts as level, and on return from the interrupt handler the hypervisor will deliver a new virtual interrupt for any unmasked interrupts which for which the status has not been cleared. This fix clears the interrupt status in the interrupt handler. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] PS3: Fix bug where the major version part is not comparedMasakazu Mokuno
Fix the bug that the major version part of the firmware version number is ignored in the comparison done by ps3_compare_firmware_version because the difference of two 64-bit quantities is returned as an int. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] Update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spufs: Don't call spu_run_init from spu_reacquire_runnableAndre Detsch
This fixes a major bug which was happening when a SPU thread advances its execution right after being restored to a SPU. A potentially outdated NPC value was being (re)written to the SPU. So, spu_run_init, in this case, was either not doing anything relevant, or breaking the execution of the SPU thread. This fixes a common problem of losing a mailbox write when it was done to a saved context. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spufs: Fix update of mailbox status register during backed wbox writeArnd Bergmann
When a process writes into the inbound spu mailbox (wbox) while the context is saved, we accidentally break the contents of the mb_stat_R register by clearing other entries of the mailbox status register. This can cause the user side to hang. This change fixes the problem by only altering the appropriate bits of the mailbox status register during a backing-store write. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] spu_manage: fix spu_unit_number for celleb device treeChristian Krafft
This fixes a regression introduced with 2.6.23-rc4 after on some confusion about the device tree interfaces. IBM QS21 device trees provide "physical-id", so we changed the code to run on that and remain compatible with all IBM machines. However, the Toshiba Celleb device tree provides the "unit-id" property, which was in the Linux code, but never used in this way on IBM hardware. Legacy device tree used the reg property for the physical id of an spe. This patch fixes find_spu_unit_number to look for the spu id in that order. The length is checked to avoid misinterpretation in case the attributes unit-id or reg do not contain the id. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Jeremy Kerr <jk@ozlabs.org>
2007-08-29[POWERPC] Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-28[POWERPC] Flush registers to proper task contextKumar Gala
When we flush register state for FP, Altivec, or SPE in flush_*_to_thread we need to respect the task_struct that the caller has passed to us. Most cases we are called with current, however sometimes (ptrace) we may be passed a different task_struct. This showed up when using gdbserver debugging a simple program that used floating point. When gdb tried to show the FP regs they all showed up as 0, because the child's FP registers were never properly flushed to memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-25[POWERPC] Fix SLB initialization at boot timePaul Mackerras
This partially reverts edd0622bd2e8f755c960827e15aa6908c3c5aa94. It turns out that the part of that commit that aimed to ensure that we created an SLB entry for the kernel stack on secondary CPUs when starting the CPU didn't achieve its aim, and in fact caused a regression, because get_paca()->kstack is not initialized at the point where slb_initialize is called. This therefore just reverts that part of that commit, while keeping the change to slb_flush_and_rebolt, which is correct and necessary. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] cell: Update cell_defconfig for 2.6.23Arnd Bergmann
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] axonram: Do not delete gendisks queue in error pathMaxim Shchetynin
On exit do not delete gendisk's queue because this is already done by del_gendisk(). Doing it twice may cause memory damage. Signed-off-by: Maximilian <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] axonram: Module modification for latest firmware API changesMaxim Shchetynin
Firmware would not deliver two interrupt numbers in device-tree any more but only one, for correctable ECC, because uncorrectable ECC from now is handled by firmware itself. Changes in the axonram module are necessary because in the old version, if it is not allowed to fetch the second interrupt number from device-tree, it interpretes this as an error case and exits. Signed-off-by: Maximilian <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] cell: Support pinhole-reset on IBM cell bladesArnd Bergmann
The Cell Broadband Engine has a method of injecting a system-reset-exception from an external source into the operating system, which should trigger the regular behaviour of entering xmon or kdump. Unfortunately, the exception handler cannot distinguish it from other interrupt causes by the SRR1 register, which gets used for this on Power 6 and others. IBM Blade servers that want to support triggering the system reset exception using a pinhole button in the front panel therefore use an extra register to determine the reset cause. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> -- Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] spu_manage: Use newer physical-id attributeChristian Krafft
Legacy device tree used the reg property for the physical id of an spe. On newer device tree layouts the reg property contains the "correct" value in the reg attribute. So there has been intoduced the "physical-id" on newer devicetree layouts. The id is stored by spu_manage into the spu struct as spe_id. cbe_thermal has been changed to use the spu->spe_id. There's no need for the thermal code to check devicetree attributes for itself. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25[POWERPC] pasemi: Another IOMMU bugfix for 64K PAGE_SIZEOlof Johansson
More fallout from the switch from PAGE_SIZE based IOMMU to the native page size for the driver. By pure luck it happened to work most of the time, since we end up invalidating the wrong entries in the TLB. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-21[POWERPC] Fix PCI Device ID for MPC8544/8533 processorsKumar Gala
The initial user manuals for MPC8544/8533 had some issues with properly documenting the device IDs for MPC8544/8533. These processors are almost identical and both show up on the reference boards. Fix up the quirks for PCIe support to handle MPC8533/E. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-20Merge branch 'fixes-2.6.23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix 8xx compile failure [POWERPC] Fix FSL BookE machine check reporting [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards [POWERPC] Add interrupt resource for RTC CMOS driver
2007-08-17[POWERPC] Fix 8xx compile failureKumar Gala
CC arch/powerpc/sysdev/commproc.o arch/powerpc/sysdev/fsl_soc.c: In function fsl_pcmcia_of_init: arch/powerpc/sysdev/fsl_soc.c:1109: error: implicit declaration of function of_platform_device_create Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fix FSL BookE machine check reportingBecky Bruce
Reserved MCSR bits on FSL BookE parts may have spurious values when mcheck occurs. Mask these off when printing the MCSR to avoid confusion. Also, get rid of the MCSR_GL_CI bit defined for e500 - this bit doesn't actually have any meaning. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boardsKumar Gala
The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Add interrupt resource for RTC CMOS driverKumar Gala
The RTC CMOS driver expects the interrupt to be a resource of the platform device. Use a fixed interrupt value of 8 since on PPC if we are using this its off an i8259 which we ensure has interrupt numbers 0..15. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17[POWERPC] Fix invalid semicolon after if statementIlpo Järvinen
A similar fix to netfilter from Eric Dumazet inspired me to look around a bit by using some grep/sed stuff as looking for this kind of bugs seemed easy to automate. This is one of them I found where it looks like this semicolon is not valid. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] ps3: Fix no storage devices foundGeert Uytterhoeven
Fix probing of PS3 storage devices: in the success case, we should set `error' to zero, not `result'. Without this patch no storage devices are found. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] Fix for assembler -gRoland McGrath
ppc64 does the unusual thing of using #include on a compiler-generated assembly file (lparmap.s) from an assembly source file (head_64.S). This runs afoul of my recent patch to pass -gdwarf2 to the assembler under CONFIG_DEBUG_INFO. This patch avoids the problem by disabling DWARF generation (-g0) when producing lparmap.s. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] Fix small race in 44x tlbie functionDavid Gibson
The 440 family of processors don't have a tlbie instruction. So, we implement TLB invalidates by explicitly searching the TLB with tlbsx., then clobbering the relevant entry, if any. Unfortunately the PID for the search needs to be stored in the MMUCR register, which is also used by the TLB miss handler. Interrupts were enabled in _tlbie(), so an interrupt between loading the MMUCR and the tlbsx could cause incorrect search results, and thus a failure to invalide TLB entries which needed to be invalidated. This fixes the problem in both arch/ppc and arch/powerpc by inhibiting interrupts (even critical and debug interrupts) across the relevant instructions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] Remove unused code causing a compile warningBecky Bruce
AFAICT, nobody is using ft_ordered(), and it causes a build warning to be generated. This patch cleans that up by removing the function and the commented-out code that calls it. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15[POWERPC] cell: Fix errno for modular spufs_create with invalid neighbourJeremy Kerr
At present, spu_create with an invalid neighbo(u)r will return -ENOSYS, not -EBADF, but only when spufs.o is built as a module. This change adds the appropriate errno, making the behaviour the same as the built-in case. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Fix size check for hugetlbfsBenjamin Herrenschmidt
My "slices" address space management code that was added in the 2.6.22 implementation of get_unmapped_area() doesn't properly check that the size is a multiple of the requested page size. This allows userland to create VMAs that aren't a multiple of the huge page size with hugetlbfs (since hugetlbfs entirely relies on get_unmapped_area() to do that checking) which leads to a kernel BUG() when such areas are torn down. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Fix initialization and usage of dma_maskBenjamin Herrenschmidt
powerpc has a couple of bugs in the usage of dma_masks that tend to break when drivers explicitly try to set a 32-bit mask for example. First, the code that generates the pci devices from the OF device-tree doesn't initialize the mask properly, then our implementation of set_dma_mask() was trying to validate the -previous- mask value, not the one passed in as an argument. This fixes these problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Fix more section mismatches in head_64.SStephen Rothwell
WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms ↵Kim Phillips
with QE UEC" This reverts commit 3baee955953957be5496cd28e9c544d9db214262. That commit was a mistake from the start; I added mdio type to the bus scan list early on in my ucc_geth migrate to phylib development, which is just pure wrong (the ucc_geth_mii driver creates the mii bus and the PHY layer handles PHY enumeration without translation). This follows on from commit 77926826f301fbd8ed96d3cd9ff17a5b59560dfb: Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()" which was basically trying to hide a symptom of the original mistake this revert fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] PS3: Update ps3_defconfiggeoffrey.levand@am.sony.com
Update ps3_defconfig. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] PS3: Remove text saying PS3 support is incompleteGeoff Levand
Remove the Kconfig message that indicates the PS3 platform support is incomplete. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] PS3: Fix storage probe logicGeert Uytterhoeven
Fix the PS3 storage probe logic to properly find device regions on cold startup. o Change the storage probe event mask from notify_device_ready to notify_region_update. o Improve the storage probe error handling. o Change ps3_storage_wait_for_device() to use a temporary variable to hold the buffer address. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] cell: Move SPU affinity init to spu_management_of_opsAndre Detsch
This patch moves affinity initialization code from spu_base.c to a new spu_management_of_ops function (init_affinity), which is empty in the case of PS3. This fixes a linking problem that was happening when compiling for PS3. Also, some small code style changes were made. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10[POWERPC] Fix potential duplicate entry in SLB shadow bufferPaul Mackerras
We were getting a duplicate entry in the SLB shadow buffer in slb_flush_and_rebolt() if the kernel stack was in the same segment as PAGE_OFFSET, which on POWER6 causes the hypervisor to terminate the partition with an error. This fixes it. Also we were not creating an SLB entry (or an SLB shadow buffer entry) for the kernel stack on secondary CPUs when starting the CPU. This isn't a major problem, since an appropriate entry will be created on demand, but this fixes that also for consistency. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fixes for the SLB shadow buffer codeMichael Neuling
On a machine with hardware 64kB pages and a kernel configured for a 64kB base page size, we need to change the vmalloc segment from 64kB pages to 4kB pages if some driver creates a non-cacheable mapping in the vmalloc area. However, we never updated with SLB shadow buffer. This fixes it. Thanks to paulus for finding this. Also added some write barriers to ensure the shadow buffer contents are always consistent. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix a compile warning in powermac/feature.cSegher Boessenkool
...by using the pci_get API instead of the deprecated old stuff. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix a compile warning in pci_32.cSegher Boessenkool
__must_check, so do so. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix parse_drconf_memory() for 64-bit start addressesMichael Ellerman
Some new machines use the "ibm,dynamic-reconfiguration-memory" property to provide memory layout information, rather than via memory nodes. There is a bug in the code to parse this property for start addresses over 4GB; we store the start address in an unsigned int, which means we throw away the high bits and add apparently duplicate regions. This results in a BUG() in free_bootmem_core(). This fixes it by using an unsigned long instead. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix num_cpus calculation in smp_call_function_map()Kevin Corry
In smp_call_function_map(), num_cpus is set to the number of online CPUs minus one. However, if the CPU mask does not include all CPUs (except the one we're running on), the routine will hang in the first while() loop until the 8 second timeout occurs. The num_cpus should be set to the number of CPUs specified in the mask passed into the routine, after we've made any modifications to the mask. With this change, we can also get rid of the call to cpus_empty() and avoid adding another pass through the bitmask. Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] ps3: Fix section mismatch in ps3/setup.cStephen Rothwell
WARNING: vmlinux.o(.text+0x605d4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.prealloc' and '.ps3_power_save') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] spufs: Fix affinity after introduction of node_allowed() callsAndre Detsch
This patch fixes affinity reference point placement, which was not being done in some situations, after the introduction of node_allowed() calls. The previously used parameter, 'ctx', is just the iterator of the previous list_for_each_entry_reverse loop, and its value might be invalid at the end of the loop. Also, the right context to seek for information when defining the reference ctx location _is_ the reference ctx. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03[POWERPC] Fix special PTE code for secondary hash bucketPaul Mackerras
The code for mapping special 4k pages on kernels using a 64kB base page size was missing the code for doing the RPN (real page number) manipulation when inserting the hardware PTE in the secondary hash bucket. It needs the same code as has already been added to the code that inserts the HPTE in the primary hash bucket. This adds it. Spotted by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-31remove unused TIF_NOTIFY_RESUME flagStephane Eranian
Remove unused TIF_NOTIFY_RESUME flag for all processor architectures. The flag was not used excecpt on IA-64 where the patch replaces it with TIF_PERFMON_WORK. Signed-off-by: stephane eranian <eranian@hpl.hp.com> Cc: <linux-arch@vger.kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29Remove fs.h from mm.hAlexey Dobriyan
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>