aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2008-07-16powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENETKumar Gala
If we don't enable FS_ENET we get build issues: arch/powerpc/platforms/built-in.o: In function `ep8248e_mdio_probe': arch/powerpc/platforms/82xx/ep8248e.c:129: undefined reference to `alloc_mdio_bitbang' arch/powerpc/platforms/82xx/ep8248e.c:143: undefined reference to `mdiobus_register' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16Merge commit 'origin/master'Benjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/kernel/stacktrace.c arch/powerpc/mm/slice.c arch/ppc/kernel/smp.c
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'core/stacktrace' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: generic-ipi: powerpc/generic-ipi tree build failure stacktrace: fix build failure on sparc64 stacktrace: export save_stack_trace[_tsk] stacktrace: fix modular build, export print_stack_trace and save_stack_trace backtrace: replace timer with tasklet + completions stacktrace: add saved stack traces to backtrace self-test stacktrace: print_stack_trace() cleanup debugging: make stacktrace independent from DEBUG_KERNEL stacktrace: don't crash on invalid stack trace structs
2008-07-15Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-buildBenjamin Herrenschmidt
Manual fixup of: arch/powerpc/Kconfig
2008-07-15powerpc: Fix a build problem on ppc32 with new DMA_ATTRsTakashi Iwai
The new dma_attrs support must only be enabled for 64 bits as it's not been implemented for 32 bits yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: Don't spin on sync instruction at boot timeSonny Rao
Push the sync below the secondary smp init hold loop and comment its purpose. This should speed up boot by reducing global traffic during the single-threaded portion of boot. Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: Add VSX load/store alignment exception handlerMichael Neuling
VSX loads and stores will take an alignment exception when the address is not on a 4 byte boundary. This add support for these alignment exceptions and will emulate the requested load or store. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: fix giveup_vsx to save registers correctlyMichael Neuling
giveup_vsx didn't save the FPU and VMX regsiters. Change it to be like giveup_fpr/altivec which save these registers. Also update call sites where FPU and VMX are already saved to use the original giveup_vsx (renamed to __giveup_vsx). Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: support for latencytopArnd Bergmann
Implement save_stack_trace_tsk on powerpc, so that we can run with latencytop. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: Remove unnecessary condition when sanity-checking WIMG bitsDave Kleikamp
It is okay for both _PAGE_GUARDED and _PAGE_COHERENT (G and M) to be set in the same pte. In fact, even if that were not the case, there doesn't seem to be any place where G is set without also setting I (_PAGE_NO_CACHE), so the test for I is sufficient as a condition to clear _PAGE_COHERENT when filling the hash table. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: Add PPC_FEATURE_PSERIES_PERFMON_COMPATNathan Lynch
Background from Maynard Johnson: As of POWER6, a set of 32 common events is defined that must be supported on all future POWER processors. The main impetus for this compat set is the need to support partition migration, especially from processor P(n) to processor P(n+1), where performance software that's running in the new partition may not be knowledgeable about processor P(n+1). If a performance tool determines it does not support the physical processor, but is told (via the PPC_FEATURE_PSERIES_PERFMON_COMPAT bit) that the processor supports the notion of the PMU compat set, then the performance tool can surface just those events to the user of the tool. PPC_FEATURE_PSERIES_PERFMON_COMPAT indicates that the PMU supports at least this basic subset of events which is compatible across POWER processor lines. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15powerpc: Add driver for Barrier Synchronization RegisterSonny Rao
Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-07-15Merge commit 'jwb/jwb-next'Benjamin Herrenschmidt
2008-07-14Merge branch 'core/rodata' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/rodata' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: move BUG_TABLE into RODATA
2008-07-14generic-ipi: powerpc/generic-ipi tree build failureStephen Rothwell
Today's linux-next build (powerpc allmodconfig) failed like this: ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined! But save_stack_trace is exported in arch/powerpc/kernel/stacktrace.c I couldn't figure it out until I noticed these earlier warnings: arch/powerpc/kernel/stacktrace.c:47: warning: data definition has no type or storage class arch/powerpc/kernel/stacktrace.c:47: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/powerpc/kernel/stacktrace.c:47: warning: parameter names (without types) in function declaration I applied the patch below. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <linuxppc-dev@ozlabs.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14powerpc/fsl: update crypto node definition and device tree instancesKim Phillips
delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: Minor fixes for 85xxds and 8536ds board.Jason Jin
Remove the "uninitialized use" compile warning and avoid potential runtime issue. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc: Add 82xx/83xx/86xx to 6xx MultiplatformKumar Gala
There isn't any reason at this point that we can't build 82xx, 83xx & 86xx support in with the other 6xx based boards. Twiddle the Kconfigs to allow this. This allows us to remove the machine type selection for related to 6xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: publish of device for cds platformsDave Jiang
Publish the devices listed in dts under SOC as of_device for 85xx_cds platform. The devices are needed by the 85xx EDAC driver. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/booke: don't reinitialize time baseKumar Gala
For some reason long ago I decided that we should zero out the time base when we calibrate the decrementer. The problem is that this can be harmful in SMP systems where the firmware has already synchronized the time bases on the various cores. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/86xx: Refactor pic initKumar Gala
Moved the pic initialization into its own common file and out of the board code. Also fixed the OF reference counting on the mpic node. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/CPM: Add i2c pins to dts and board setupJochen Friedrich
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: Add support for MPC8536DSKumar Gala
Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: minor fixes for MPC85xx DS board portKumar Gala
These issues were reported by Stephen Rothwell for another 85xx board port and pointed out by Chen Gong as issues in the DS port. * mpic OF node reference counting was off * of_device_id struct should be marked as __initdata Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/CPM: Minor cosmetic changes to udbg_putcNye Liu
udbg_putc is a *function pointer* that is initialized during udbg_init_cpm. It might not be initialized properly when called from udbg_putc_cpm(), so (recursively) call udbg_putc_cpm() directly. Signed-off-by: Nye Liu <nyet@mrv.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: TQM8548: add missing support for RTC and LM75Wolfgang Grandegger
It adds the missing RTC node to tqm8548.dts and enables support for I2C, DS1307 and LM75 in the default configuration. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/86xx: mpc8610_hpcd: fix interrupt trigger type for ULi IDEAnton Vorontsov
i8259 PIC is disabled on MPC8610HPCD, and ULi IDE is configured to use PCI sideband interrupt that is specified in the device tree. Current HPCD's device tree specify that IDE interrupt is low to high sensitive, but in practice ULi IDE throws active-high interrupts (not active-low as all normal PCI devices). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc: Fix pq2fads irq handling with PREEMPT_RTRune Torgersen
Fix interrupt threading issue on pq2fads when running with CONFIG_PREEMPT_RT Signed-off-by: Rune Torgersen <runet@innovsys.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/85xx: Fix KSI8560 .dtsKumar Gala
Rename MPIC label to mpic to match all other 85xx .dts and to fix compile issue introduced by addition of the DMA node. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14Merge commit 'origin/HEAD' into test-mergeBenjamin Herrenschmidt
Manual fixup of include/asm-powerpc/pgtable-ppc64.h
2008-07-12powerpc/mpc5121: Add support for CPLD on MPC5121ADS boardJohn Rigby
Add a interrupt host for the interrupt controller in the mpc5121ads cpld. PCI interrupts are 0-7 the rest are 8-15 Touchscreen pendown irq is hardwired to irq1 All other irqs are chained to irq0 Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5121: Add generic board support for MPC5121 platformsJohn Rigby
Move shared code from mpc5121_ads.c to new file mpc512x_shared.c - mpc512x_find_ips_freq -> unchanged - contents of mpc5121_ads_init_IRQ -> mpc512x_init_IRQ - looking for fsl,mpc5121-ipic instead of fsl,ipic - mpc5121_ads_declare_of_platform_devices -> mpc5121_declare_of_platform_devices - and use compatible for lookup instead of node name Add new generic board setup mpc5121_generic.c Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5121: Add clock driverJohn Rigby
Plugs into the generic powerpc clock driver in arch/powerpc/kernel/clock.c The following subset of clk_interface is implemented: clk_get, clk_put: get clock via name, release clock clk_enable, clk_disable: enable or disable clock clk_get_rate: get clock rate in Hz clk_set_rate: stubbed clk_round_rate: stubbed clk_set_parent: NULL clk_get_parent: NULL Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5121: Update device tree for MPC5121ADS evaluation boardJohn Rigby
Current device tree is only bare bones. This patch adds nodes to make it a complete tree for the MPC5121ads. Added nodes include: mbx - opengl coprocessor nfc - nand flash controller cpld-pic - on board cpld rtc clock - clock control pmc - power management control gpio mscan - can module i2c axe - audio coprocessor display - display interface unit mdio ethernet usb ioctl - pin config pata ac97 - PSC configured as AC97 pscfifo - psc fifo configuration dma pci Fix typo in header changing MDS to ADS. Add a compatible property of the form "fsl,mpc5121-..." to nodes missing one. Changed localbus compatible to fsl,mpc5121-localbus, this does not break anything because the only code that uses it finds it via the node name, not compatible. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5200: fix compile warnings in bestcomm driverGrant Likely
Fix for the following compiler warnings: CC arch/powerpc/sysdev/bestcomm/bestcomm.o arch/powerpc/sysdev/bestcomm/bestcomm.c: In function 'mpc52xx_bcom_probe': arch/powerpc/sysdev/bestcomm/bestcomm.c:446: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'phys_addr_t' CC arch/powerpc/sysdev/bestcomm/sram.o arch/powerpc/sysdev/bestcomm/sram.c: In function 'bcom_sram_init': arch/powerpc/sysdev/bestcomm/sram.c:89: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5200: Add PSC helpers for bestcomm engineGrant Likely
Simplify the interface for setting up bestcomm DMA to PSCs by adding some helper functions. The helper function sets the correct values for the initator and ipr values in PSC DMA tasks based on the PSC number. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5200: add missing MSCAN FDT nodes for TQM52xxWolfgang Grandegger
This patch adds the still missing FDT nodes for the MSCAN devices for the TQM52xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/i2c: Convert i2c-mpc into an of_platform driverJon Smirl
Convert i2c-mpc to an of_platform driver. Utilize the code in drivers/of-i2c.c to make i2c modules dynamically loadable by the device tree. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12powerpc/mpc5200: PCI write combine timerAndre Schwarz
On MPC5200 the PCI target control register (PCITCR) @ MBAR + 0xD6C is initialized with only bit 7 (Latrule disable) set. The 8-Bit write combine timer (Bits 24..31) should be also set to a reasonable value _greater zero_ (0x08 = default) since setting it to 0x00 leads to _very poor_ performance as a PCI target since external burst won't be possible at all. Setting the WCT to 0x08 (cache-line size) leads to good overall perfomance. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-10Merge branch 'tracing/ftrace' into auto-ftrace-nextIngo Molnar
2008-07-09powerpc: Fix problems with 32bit PPC's running with >= 4GB of RAMStefan Roese
This patch enables 32bit PPC's (with 36bit physical address space, e.g. IBM/AMCC PPC44x) to run with >= 4GB of RAM. Mostly its just replacing types (unsigned long -> phys_addr_t). Tested on an AMCC Katmai with 4GB of DDR2. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09powerpc/44x: Update ppc44x_defconfigJosh Boyer
Add the virtex and sam440ep platforms to the multiboard defconfig Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09powerpc/44x: Support NAND boot for Rev A Warp boardsSean MacLennan
Allow the Rev A Warp boards to boot from NAND. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09powerpc: rework 4xx PTE access and TLB missBenjamin Herrenschmidt
This is some preliminary work to improve TLB management on SW loaded TLB powerpc platforms. This introduce support for non-atomic PTE operations in pgtable-ppc32.h and removes write back to the PTE from the TLB miss handlers. In addition, the DSI interrupt code no longer tries to fixup write permission, this is left to generic code, and _PAGE_HWWRITE is gone. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09Merge branch 'virtex-for-2.6.27' of ↵Josh Boyer
git://git.secretlab.ca/git/linux-2.6-virtex into 4xx-next
2008-07-09powerpc/440: Convert Virtex ML507 device tree to dts-v1Grant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-09powerpc/bootwrapper: Allow user to specify additional default targetsGrant Likely
It is inconvenient to add additional default targets to the bootwrapper Makefile for each new board supported which just needs a different dts file. This change allows the defconfig to specify additional build targets. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09powerpc/eeh: PERR/SERR bit settings during EEH device recoveryMike Mason
The following patch restores the PERR and SERR bits in the PCI command register during an EEH device recovery. We have found at least one case (an Agilent test card) where the PERR/SERR bits are set to 1 by firmware at boot time, but are not restored to 1 during EEH recovery. The patch fixes the Agilent card problem. It has been tested on several other EEH-enabled cards with no regressions. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 05:57:57 +0000