aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc64
AgeCommit message (Collapse)Author
2005-10-11[PATCH] ppc64: Add R_PPC64_TOC16 module relocPeter Bergner
Newer gcc's are generating this relocation, so the module loader needs to handle it. Signed-off-by: Peter Bergner <bergner@vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] ppc64: Fix PCI hotplugAnton Blanchard
pSeries_irq_bus_setup is marked __devinit but references s7a_workaround which is marked __initdata. Depending on who got the memory for s7a_workaround (and if the value was now positive), it was possible for PCI hotplugged devices to have 3 subtracted from their interrupt number. This would happen randomly and caused me much confusion :) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01[PATCH] ppc64: fix up()/down() usage for kprobe_mutexAnanth N Mavinakayanahalli
The incorrect kprobe_mutex usage on x86_64 had percolated to ppc64 too. First noticed by Yanmin Zhang. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30[PATCH] bogus BUILD_BUG_ON() in bpa_iommuAl Viro
BUILD_BUG_ON(1) is asking for trouble (and getting it) when used in that manner - dead code elimination happens after we parse it and invalid type is invalid type, dead code or not. It might be version-dependent, but at least 4.0.1 refuses to accept that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] ppc64: More hugepage fixesBenjamin Herrenschmidt
My previous patch fixing invalidation of huge PTEs wasn't good enough, we still had an issue if a PTE invalidation batch contained both small and large pages. This patch fixes this by making sure the batch is flushed if the page size fed to it changes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] ppc64: Add missing barrier() in kexec codeAnton Blanchard
Mikey and I were testing kexec and hit a lockup. It turns out gcc 4.0 optimises the kexec_prepare_cpus loop so we avoid reloading paca.hw_cpu_id. A gcc barrier() fixes the problem. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] ppc64: Fix huge pages MMU mapping bugBenjamin Herrenschmidt
Current kernel has a couple of sneaky bugs in the ppc64 hugetlb code that cause huge pages to be potentially left stale in the hash table and TLBs (improperly invalidated), with all the nasty consequences that can have. One is that we forgot to set the "secondary" bit in the hash PTEs when hashing a huge page in the secondary bucket (fortunately very rare). The other one is on non-LPAR machines (like Apple G5s), flush_hash_range() which is used to flush a batch of PTEs simply did not work for huge pages. Historically, our huge page code didn't batch, but this was changed without fixing this routine. This patch fixes both. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ppc64: SMU driver update & i2c supportBenjamin Herrenschmidt
The SMU is the "system controller" chip used by Apple recent G5 machines including the iMac G5. It drives things like fans, i2c busses, real time clock, etc... The current kernel contains a very crude driver that doesn't do much more than reading the real time clock synchronously. This is a completely rewritten driver that provides interrupt based command queuing, a userland interface, and an i2c/smbus driver for accessing the devices hanging off the SMU i2c busses like temperature sensors. This driver is a basic block for upcoming work on thermal control for those machines, among others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ppc64: Fix 64bit ptrace DABR supportAnton Blanchard
Fix my stupid bug in the 64bit version of PTRACE_SET_DEBUGREG. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ppc64: Fix build with iommu debug enabledAnton Blanchard
Fix build when iommu debug is enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ppc64: Fix LPAR regressionAnton Blanchard
The recent iommu fix broke booting on some POWER4 and POWER5 LPAR boxes. It looks like we have been calling the non LPAR iommu_dev_setup on LPAR machines for a while. The recent iommu fix caused that code path to fail. It looks like we just need to hook up the devices iommu_table to the parents one, so do that instead of calling iommu_dev_setup_pSeries and crossing the streams. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21[PATCH] ppc64: Build zImage.vmode for G5Benjamin Herrenschmidt
zImage.vmode was recently added. It's a version of zImage in which the ELF note section used by open firmware indicates that it requires a virtual mode instance of OF instead of real mode. This allows it to work with Apple OF, and thus is directly bootable (or netbootable) from OF command line. (Unfortunately, pSeries OF sort-of requires real mode and Apple OF sort-of requires virtual mode, and both tend to be unhappy if no notes section specifies the mode at all). However, we forgot to add zImage.vmode to the default G5 build. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21[PATCH] ppc64: Fix issue with non zero boot cpuAnton Blanchard
The new version of the flattened device tree passes the boot cpuid in the header instead of via a linux,boot-cpu property. We need to update the in kernel OF parsing code to do this, otherwise machines with a non zero boot cpuid fail to come up. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21[PATCH] PPC64: Fix boot for some pre-POWER4 systemsOlof Johansson
Some RS64 systems (such as F80) have non-python host bridges with EADS. However, they have two EADS with 4 buses each under them, so the old logic that assumed no more than 7 busses per PHB failed miserably. Big thanks to Olaf Hering for helping me test this, he's got one of the few machines that broke from the previous logic. Also, to be a bit smarter at detecting the need for a PHB-level IOMMU table by checking for the presence of an ISA bus. Only PHBs with ISA bridges should need the PHB-level table. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21[PATCH] ppc64: Fix PCI flags when using OF device treePaul Mackerras
My code to set up the PCI tree from the Open Firmware device tree was setting IORESOURCE_* flags on the resources for the devices, but not the PCI_BASE_ADDRESS_* flags. This meant that some drivers misbehaved, and /proc/pci showed the wrong types for the resources. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17[PATCH] ppc64: build fixAnton Blanchard
I forgot to include siginfo.h when I added data breakpoint support. We must include it in a round-a-bout way in mainline. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15[PATCH] ppc64: Fix recent regressionJimi Xenidis
As noted by Olof Johansson <olof@lixom.net>: "A recent patch changed the way the LPAR bit is checked during early boot. This resulted in a polarity change in a conditional branch without changing the branch, causing at least some legacy machines to not boot." This fixes it. Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14[LIB]: Consolidate _atomic_dec_and_lock()David S. Miller
Several implementations were essentialy a common piece of C code using the cmpxchg() macro. Put the implementation in one spot that everyone can share, and convert sparc64 over to using this. Alpha is the lone arch-specific implementation, which codes up a special fast path for the common case in order to avoid GP reloading which a pure C version would require. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14[PATCH] error path in setup_arg_pages() misses vm_unacct_memory()Hugh Dickins
Pavel Emelianov and Kirill Korotaev observe that fs and arch users of security_vm_enough_memory tend to forget to vm_unacct_memory when a failure occurs further down (typically in setup_arg_pages variants). These are all users of insert_vm_struct, and that reservation will only be unaccounted on exit if the vma is marked VM_ACCOUNT: which in some cases it is (hidden inside VM_STACK_FLAGS) and in some cases it isn't. So x86_64 32-bit and ppc64 vDSO ELFs have been leaking memory into Committed_AS each time they're run. But don't add VM_ACCOUNT to them, it's inappropriate to reserve against the very unlikely case that gdb be used to COW a vDSO page - we ought to do something about that in do_wp_page, but there are yet other inconsistencies to be resolved. The safe and economical way to fix this is to let insert_vm_struct do the security_vm_enough_memory check when it finds VM_ACCOUNT is set. And the MIPS irix_brk has been calling security_vm_enough_memory before calling do_brk which repeats it, doubly accounting and so also leaking. Remove that, and all the fs and arch calls to security_vm_enough_memory: give it a less misleading name later on. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-Off-By: Kirill Korotaev <dev@sw.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13Merge master.kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6 Linus Torvalds
2005-09-13[PATCH] ppc64: Make eeh_init function againPaul Mackerras
My patch "Separate pci bits out of struct device_node" (commit 1635317facea3094ddf34082cd86797efb1d9f7e) had the unfortunate side-effect that it stopped eeh_init() from working correctly. It needs the pointers set up by find_and_init_phbs(), but it was being called just before find_and_init_phbs(). That meant that we didn't enable EEH (pSeries PCI error recovery) on any devices, and that meant that on POWER5 systems, the hypervisor wouldn't let us enable memory or I/O space access to any devices, and their drivers got somewhat confused. This fixes it by moving the eeh_init call after find_and_init_phbs. Tested on a POWER5 partition. Signed-of-by: Paul Mackerras <paulus@samba.org> Signed-of-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] ppc64: Remove unused codeAnton Blanchard
ppc64_attention_msg and ppc64_dump_msg are not used so remove them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: Fix for missing start-cpu rtas tokenAnton Blanchard
If the rtas start-cpu token doesnt exist then presume the cpu is already spinning. If it isnt we will catch it later on when the cpu doesnt respond. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: indent pci codeAnton Blanchard
Fix up some badly indented code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: xics cleanupAnton Blanchard
A few xics cleanups: - Make some things static. - Be more consistent with error printing - interrupts are unsigned, error values are signed. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: Add ptrace data breakpoint supportAnton Blanchard
Add hardware data breakpoint support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: Fix up some whitespace issues in ptrace32.cAnton Blanchard
Fix up some whitespace issues in ptrace32.c Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12[PATCH] ppc64: Add PTRACE_{GET|SET}VRREGSRobert Jennings
The ptrace get and set methods for VMX/Altivec registers present in the ppc tree were missing for ppc64. This patch adds the 32-bit and 64-bit methods. Updated with the suggestions from Anton following the lines of his code snippet. Added: - flush_altivec_to_thread calls as suggested by Anton - piecewise copy of structure to preserve 32-bit vrsave data as per Anton (I consolidated the 32 and 64bit versions with 2 helper macros - Anton) Signed-off-by: Robert C Jennings <rcjenn@austin.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12ppc64: Set up PCI tree from Open Firmware device treePaul Mackerras
This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-10[PATCH] powerpc: Move include3 to arch/$(ARCH)/includeStephen Rothwell
This is less troublesome and makes more sense. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] merge some from Rusty's trivial patchesAdrian Bunk
This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] spinlock consolidationIngo Molnar
This patch (written by me and also containing many suggestions of Arjan van de Ven) does a major cleanup of the spinlock code. It does the following things: - consolidates and enhances the spinlock/rwlock debugging code - simplifies the asm/spinlock.h files - encapsulates the raw spinlock type and moves generic spinlock features (such as ->break_lock) into the generic code. - cleans up the spinlock code hierarchy to get rid of the spaghetti. Most notably there's now only a single variant of the debugging code, located in lib/spinlock_debug.c. (previously we had one SMP debugging variant per architecture, plus a separate generic one for UP builds) Also, i've enhanced the rwlock debugging facility, it will now track write-owners. There is new spinlock-owner/CPU-tracking on SMP builds too. All locks have lockup detection now, which will work for both soft and hard spin/rwlock lockups. The arch-level include files now only contain the minimally necessary subset of the spinlock code - all the rest that can be generalized now lives in the generic headers: include/asm-i386/spinlock_types.h | 16 include/asm-x86_64/spinlock_types.h | 16 I have also split up the various spinlock variants into separate files, making it easier to see which does what. The new layout is: SMP | UP ----------------------------|----------------------------------- asm/spinlock_types_smp.h | linux/spinlock_types_up.h linux/spinlock_types.h | linux/spinlock_types.h asm/spinlock_smp.h | linux/spinlock_up.h linux/spinlock_api_smp.h | linux/spinlock_api_up.h linux/spinlock.h | linux/spinlock.h /* * here's the role of the various spinlock/rwlock related include files: * * on SMP builds: * * asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the * initializers * * linux/spinlock_types.h: * defines the generic type and initializers * * asm/spinlock.h: contains the __raw_spin_*()/etc. lowlevel * implementations, mostly inline assembly code * * (also included on UP-debug builds:) * * linux/spinlock_api_smp.h: * contains the prototypes for the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. * * on UP builds: * * linux/spinlock_type_up.h: * contains the generic, simplified UP spinlock type. * (which is an empty structure on non-debug builds) * * linux/spinlock_types.h: * defines the generic type and initializers * * linux/spinlock_up.h: * contains the __raw_spin_*()/etc. version of UP * builds. (which are NOPs on non-debug, non-preempt * builds) * * (included on UP-non-debug builds:) * * linux/spinlock_api_up.h: * builds the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. */ All SMP and UP architectures are converted by this patch. arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via crosscompilers. m32r, mips, sh, sparc, have not been tested yet, but should be mostly fine. From: Grant Grundler <grundler@parisc-linux.org> Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU). Builds 32-bit SMP kernel (not booted or tested). I did not try to build non-SMP kernels. That should be trivial to fix up later if necessary. I converted bit ops atomic_hash lock to raw_spinlock_t. Doing so avoids some ugly nesting of linux/*.h and asm/*.h files. Those particular locks are well tested and contained entirely inside arch specific code. I do NOT expect any new issues to arise with them. If someone does ever need to use debug/metrics with them, then they will need to unravel this hairball between spinlocks, atomic ops, and bit ops that exist only because parisc has exactly one atomic instruction: LDCW (load and clear word). From: "Luck, Tony" <tony.luck@intel.com> ia64 fix Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjanv@infradead.org> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se> Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds
2005-09-09[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversionsIngo Molnar
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h supportSam Ravnborg
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 Linus Torvalds
2005-09-09[PATCH] basic iomem annotations (ppc64)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Allow PCI config space syscalls to be used by 64-bit processes.Paul Mackerras
The pciconfig_iobase, pciconfig_read and pciconfig_write system calls were only implemented for 32-bit processes; for 64-bit processes they returned an ENOSYS error. This allows them to be used by 64-bit processes as well. The X server uses pciconfig_iobase at least, and this change is necessary to allow a 64-bit X server to work on my G5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: Big-endian I/O memory accessors.Arthur Othieno
I/O memory accessors. Big-endian version. For those busses/devices that do export big-endian I/O memory. Of notable relevance/reference: http://lwn.net/Articles/132804/ http://ozlabs.org/pipermail/linuxppc-embedded/2005-August/019798.html http://ozlabs.org/pipermail/linuxppc-embedded/2005-August/019752.html Signed-Off-By: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] Separate pci bits out of struct device_nodePaul Mackerras
This patch pulls the PCI-related junk out of struct device_node and puts it in a separate structure, struct pci_dn. The device_node now just has a void * pointer in it, which points to a struct pci_dn for nodes that represent PCI devices. It could potentially be used in future for device-specific data for other sorts of devices, such as virtual I/O devices. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] PPC64: large INITRD causes kernel not to bootMark Bellon
In PPC64 there are number of problems in arch/ppc64/boot/main.c that prevent a kernel from making use of a large (greater than ~16MB) INITRD. This is 64 bit architecture and really large INITRD images should be possible. Simply put the existing code has a fixed reservation (claim) address and once the kernel plus initrd image are large enough to pass this address all sorts of bad things occur. The fix is the dynamically establish the first claim address above the loaded kernel plus initrd (plus some "padding" and rounding). If PROG_START is defined this will be used as the minimum safe address - currently known to be 0x01400000 for the firmwares tested so far. Signed-off-by: Mark Bellon <mbellon@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: makefile cleanupGeoff Levand
This patch cleans up the output generated by ppc64 builds. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: zimage build fixGeoff Levand
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] powerpc: Make check_bugs() static inlinejdl@freescale.com
Make check_bugs() static inline and remove it from syscalls.c. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: iSeries early printk breakageStephen Rothwell
The earlier commit 8d9273918635f0301368c01b56c03a6f339e8d51 (Consolidate early console and PPCDBG code) broke iSeries because it caused unregister_console(&udbg_console) to be called unconditionally. iSeries never registers the udbg_console. This just reverts part of the change. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: Fix oops for !CONFIG_NUMAMichael Ellerman
The SPARSEMEM EXTREME code (802f192e4a600f7ef84ca25c8b818c8830acef5a) that went in yesterday broke PPC64 for !CONFIG_NUMA. The problem is that (free|reserve)_bootmem don't take a page number as their first argument, they take an address. Ruh roh. Booted on P5 LPAR, iSeries and G5. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc64: fix IPI on bpa_iicArnd Bergmann
This fixes a severe bug in the bpa_iic driver that caused all sorts of problems. We had been using incorrect priority values for inter processor interrupts, which resulted in always doing CALL_FUNCTION instead of RESCHEDULE or DEBUGGER_BREAK. The symptoms cured by this patch include bad performance on SMP systems spurious kernel panics in the IPI code. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 Linus Torvalds
2005-09-08[PATCH] PCI: remove CONFIG_PCI_NAMESAdrian Bunk
This patch removes CONFIG_PCI_NAMES. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>