aboutsummaryrefslogtreecommitdiff
path: root/arch/s390/kernel/head64.S
AgeCommit message (Collapse)Author
2008-01-26[S390] Fix tlb flushing with idte.Martin Schwidefsky
The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] zfcpdump support.Michael Holzheu
s390 machines provide hardware support for creating Linux dumps on SCSI disks. For creating a dump a special purpose dump Linux is used. The first 32 MB of memory are saved by the hardware before the dump Linux is booted. Via an SCLP interface, the saved memory can be accessed from Linux. This patch exports memory and registers of the crashed Linux to userspace via a debugfs file. For more information refer to Documentation/s390/zfcpdump.txt, which is included in this patch. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-05[S390] Fixed handling of access register mode faults.Gerald Schaefer
Replaced check_user_space() + __check_access_register with the new check_space(). The old functions made wrong assumptions about kernel and user space when the kernel and user address spaces are switched (kernel in home space, user in primary/secondary space). Secondly the user process can switch to the accress register mode if it is running in primary or secondary mode. In addition it can load an arbitrary value to the access registers. If any other value than 0 for primary space or 1 for secondary space is loaded and memory is accessed using the base register related to the access register, the program should be terminated with a SIGSEGV. To achieve that the DUALD pointer in the DUCT and the PSALD pointer in the PASTE need to point to an array of 8 invalid access-list entries to get a ALEN-translation exception if an invalid alet is used. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-21[S390] nss: Free unused memory in kernel image.Heiko Carstens
With CONFIG_SHARED_KERNEL the kernel text segment that might be in a read only memory sections starts at 1MB. Memory between 0x12000 and 0x100000 is unused then. Free this, so we have appr. an extra MB of memory available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Convert memory detection into C code.Heiko Carstens
Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] boot from NSS supportHongjie Yang
Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Fix FCP dump feature detection.Heiko Carstens
FCP dump feature detection works only if the sclp command in head.S was succesful. Since the sclp command is skipped if diag260 works, we don't have any dump feature detection anymore. Bug was introduced with d57de5a36791cb1b7285649c62f183b0d3505f7d. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-01-09[S390] memory detection misses 128k.Hongjie Yang
Fix a memory leak problem in the memory detection routines. A memory leak of 128k occurs when we have a contiguous memory with mixed access-mode (read or write) ranges. Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Memory detection fixes.Heiko Carstens
VMALLOC_END on 31bit should be 0x8000000UL instead of 0x7fffffffL. The page mask which is used to make sure memory_end is on 4MB/2MB boundary is wrong and not needed. Therefore remove it. Make sure a vmalloc area does also exist and work on (future) machines with 4TB and more memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Use diag260 for memory size detection.Heiko Carstens
Avoid the tprot loop if diag260 works and reports that there are no holes in memory. The tprot instruction can lead to a significant delay in the ipl process if the virtual guest has a lot of memory and the host is under memory pressure. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-04[S390] Remove crept in whitespace from head*.S again.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2006-10-01[PATCH] Directed yield: direct yield of spinlocks for s390.Martin Schwidefsky
Use the new diagnose 0x9c in the spinlock implementation for s390. It yields the remaining timeslice of the virtual cpu that tries to acquire a lock to the virtual cpu that is the current holder of the lock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-28[S390] Whitespace cleanup.Heiko Carstens
Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] Use alternative user-copy operations for new hardware.Gerald Schaefer
This introduces new user-copy operations which are optimized for copying more than 256 Bytes on new hardware. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] convert some assembler to C.Heiko Carstens
Convert GET_IPL_DEVICE assembler macro to C function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] ipl/dump on panic.Michael Holzheu
It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] initrd vs. bootmem bitmap.Heiko Carstens
Move initrd if the bitmap of the bootmem allocator would overwrite it. In addition this patch sets the default size and address of the initrd to 0. Therefore all boot loaders must set the initrd size and address correctly. This is especially relevant for ftp boot via HMC/SE, where this change requires a special patch file entry in the .ins file which sets these two values contained at address 0x10408 and 0x10410. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-18[S390] .align 4096 statements in head.SHeiko Carstens
SLES9 binutils don't like .align 4096 statements in head.S. Work around this by using .org statements. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] head.S code moving.Heiko Carstens
There is almost no room left for any new code between 0x10000 and 0x10480. Move the code from 0x10000 to 0x11000. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] memory detection.Heiko Carstens
The wrong base register is used to read a value from the sclp data structure. The value is used to calculate the memory size. Use correct register %r4. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2005-11-07[PATCH] s390: merge common parts of head.S and head64.SHeiko Carstens
Merge common parts of head.S and head64.S into head.S and move architecture specific parts to head31.S and head64.S respectively. Saves us ~500 lines of duplicated assembly code. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] s390: memory query wait pswHeiko Carstens
Don't switch back to 24 bit addressing mode when waiting for an external interrupt and set the correct bit in wait PSW (external mask instead of I/O mask). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] s390: export ipl device parametersHeiko Carstens
Sysfs interface to export ipl device parameters. Dependent on the ipl type the interface will look like this: - ccw ipl: /sys/firmware/ipl/device /ipl_type - fcp ipl: /sys/firmware/ipl/binary_parameter /bootprog /br_lba /device /ipl_type /lun /scp_data /wwpn - otherwise (unknown that is): /sys/firmware/ipl/ipl_type Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h supportSam Ravnborg
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-29[PATCH] s390: check for interrupt before waitingHeiko Carstens
The patch that introduced waiting for interrupts after resetting the reader can cause the boot to fail because the system is waiting for an interrupt that will never arrive. Add code to check if an interrupt is supposed to arrive before waiting endlessly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] s390: external call performanceHeiko Carstens
The kernel uses the SIGP external call order code to signal other CPUs. When running with dedicated CPUs external calls don't get delivered immediately but within a fixed polling invervall. This can lead to delays where the system appears to do nothing. Replace the SIGP external call order with the SIGP emergency call order since this one gets delivered immediately. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] s390: spin lock retryMartin Schwidefsky
Split spin lock and r/w lock implementation into a single try which is done inline and an out of line function that repeatedly tries to get the lock before doing the cpu_relax(). Add a system control to set the number of retries before a cpu is yielded. The reason for the spin lock retry is that the diagnose 0x44 that is used to give up the virtual cpu is quite expensive. For spin locks that are held only for a short period of time the costs of the diagnoses outweights the savings for spin locks that are held for a longer timer. The default retry count is 1000. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] s390: pending interrupt after ipl from readerHeiko Carstens
Wait for interrupt and clear status pending after resetting the reader. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] s390: memory detection > 32GBHeiko Carstens
The kernel takes a very long time to boot if the memory size is bigger then 32767 MB. The memory size is contained in a structure created by an sclp call. The kernel accesses the field with a LH instrution which performs a sign extension of a 16 bit word. In the case of a memory size with bit 2^15 set this results in a very large value and the memory detection just loops for a long time. In addition if more then 64 GB are used on a 64 bit system the memory size is read from an incorrect storage location. Use zero-extention to read the 16 bit memory size and the correct offset to read the 4 byte memory size on 64 bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!