aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/Kconfig
AgeCommit message (Collapse)Author
2009-12-29sh: Only provide a PCLK definition for legacy CPG CPUs.Paul Mundt
As CPUs are migrated over to more fully-featured clock frameworks of their own and off of the legacy CPG code, they no longer have any real need for defining the PCLK value. The PCLK define in itself is already fairly misleading, as many boards get their input clocks from different sources, making this value fairly arbitrary anyways. Outside of the legacy CPG clock framework, the only place where this value is used is for deriving CLOCK_TICK_RATE, which we set back to the legacy PIT value that it was before the PCLK definitions were added in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27Merge branch 'sh/stable-updates'Paul Mundt
2009-10-27sh: enable PERF_USE_VMALLOC across the board.Paul Mundt
The vast majority of SH platforms want this, and the few that don't aren't going to care one way or the other. Enable it across the board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Kill off superfluous arch/sh/drivers/pci/Kconfig.Paul Mundt
Now that this contains a grand total of 1 Kconfig option, it's hardly worth keeping split out. Roll CONFIG_PCI back in to the top-level architecture Kconfig, along with the other bus types. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Revamp PCI DMA coherence Kconfig bits.Paul Mundt
Leaving this configurable caused more trouble than it was ever worth, so just make it explicit. Boards that are verified one way or the other can fix up their selects accordingly. We presently default to non-coherent for most platforms. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.Paul Mundt
The hugetlb dependencies presently depend on SUPERH && MMU while the hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This unfortunately allows SH-3 + MMU configurations to enable hugetlbfs without a corresponding HPAGE_SHIFT definition, resulting in the build blowing up. As SH-3 doesn't support variable page sizes, we tighten up the dependenies a bit to prevent hugetlbfs from being enabled. These days we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using that rather than adding to the list of corner cases in fs/Kconfig. Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-20sh: Convert to asm-generic/dma-mapping-common.hPaul Mundt
This converts the old DMA mapping support to the new generic dma-mapping-common.h abstraction. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16sh: Kill off legacy UBC wakeup cruft.Paul Mundt
This code was added for some ancient SH-4 solution engines with peculiar boot ROMs that did silly things to the UBC MSTP bits. None of these have been in the wild for years, and these days the clock framework wraps up the MSTP bits, meaning that the UBC code is one of the few interfaces that is stomping MSTP bits underneath the clock framework. At this point the risks far outweigh any benefit this code provided, so just kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16Merge branch 'sh/stable-updates'Paul Mundt
Conflicts: arch/sh/Kconfig
2009-10-16sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.Paul Mundt
This seems to have popped back in via some merge damage. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13sh: ftrace: Make code modification NMI safe.Paul Mundt
This cribs the x86 implementation of ftrace_nmi_enter() and friends to make ftrace_modify_code() NMI safe, particularly on SMP configurations. For additional notes on the problems involved, see the comment below ftrace_call_replace(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16sh: Wire up HAVE_SYSCALL_TRACEPOINTS.Paul Mundt
This is necessary to get ftrace syscall tracing working again.. a fairly trivial and mechanical change. The one benefit is that this can also be enabled on sh64, despite not having its own ftrace port. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Allow for kernel command line concatenation.Pawel Moll
So far kernel command line arguments could be passed in by a bootloader or defined as CONFIG_CMDLINE, which completely overwriting the first one. This change allows a developer to declare selected kernel parameters in a kernel configuration (eg. project-specific defconfig), retaining possibility of passing others by a bootloader. The obvious examples of the first type are MTD partition or bigphysarea-like region definitions, while "debug" option or network configuration should be given by a bootloader or a JTAG boot script. Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23Merge branches 'sh/hwblk' and 'sh/pm-runtime'Paul Mundt
2009-08-23sh: let ARCH_SHMOBILE select PM and PM_RUNTIMEMagnus Damm
With the Runtime PM driver changes in place, we must have Runtime PM support in place. Otherwise there is no way to enable clocks to the Runtime PM enabled hardware blocks. This patch makes Runtime PM mandatory on SuperH Mobile. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21sh: Add initial support for SH7757 CPU subtypeYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: bzip2/lzma zImage support.Paul Mundt
This plugs in bzip2 and lzma support for zImages. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12sh: Tidy up gzip-based zImage decompression.Paul Mundt
This brings the zImage handling in to the current century, in preparation for handling the other compression types. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11Merge branches 'sh/ftrace' and 'sh/stable-updates'Paul Mundt
2009-07-11sh: Function graph tracer supportMatt Fleming
Add both dynamic and static function graph tracer support for sh. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06Merge branches 'sh/ftrace' and 'sh/cachetlb'Paul Mundt
2009-07-06sh: Add ftrace syscall tracing supportMatt Fleming
Now that I've added TIF_SYSCALL_FTRACE the thread flags do not fit into a single byte any more. Code testing them now needs to be aware of the upper and lower bytes. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06sh: Define HAVE_FUNCTION_TRACE_MCOUNT_TESTMatt Fleming
Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST and test the value of function_trace_stop from our assembly code as opposed to using the generic C function. This should optimise our mcount/ftrace code path. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-03sh: Use bootmem ontop of lmbMatt Fleming
Rework the bootmem allocator to use the lmb framework. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24sh: Fix up HAVE_PERF_COUNTERS typo.Paul Mundt
That's HAVE_PERF_COUNTERS not HAVE_PERF_COUNTER. This was right initially but I seem to have screwed it up while re-typing it out by hand on another machine when I checked it in. Hmph. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-23sh: SH7786 SMP support.Paul Mundt
SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2 CPUs. This just wraps in to the existing SH-X3 SMP code with some minor changes for SH7786, including wiring up the IPIs properly, enabling IRQ_PER_CPU, and so forth. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-23sh: Provide cpu_idle_wait() to fix up cpuidle/SMP build.Paul Mundt
Crib the x86 cpu_idle_wait() implementation and shove it in with the idle code, subsequently enabling ARCH_HAS_CPU_IDLE_WAIT. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', ↵Paul Mundt
'sh/platform-updates' and 'sh/perf_counter'
2009-06-17sh: Generic HAVE_PERF_COUNTER support.Paul Mundt
This enables support for the generic software-based perf counters. Hardware counter support could be added in the future, but the lack of a performance counter IRQ makes this rather dubious. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: Use generic atomic64_t implementation.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: Convert sh64 to use the generic checksum code.Paul Mundt
This plugs in GENERIC_CSUM support on sh64, and kills off all of the old references. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: Tie sparseirq in to Kconfig.Paul Mundt
Now that the dependent patches are merged, we are ready to enable sparseirq support. This simply adds the Kconfig option, and then converts from the _cpu to the _node allocation routines to follow the upstream sparseirq API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7722 clock framework rewriteMagnus Damm
This patch rewrites the sh7722 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. While at it, now when all SuperH Mobile processors are converted, fix CONFIG_SH_CLK_CPG_LEGACY to depend on CONFIG_ARCH_SHMOBILE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7366 clock framework rewriteMagnus Damm
This patch rewrites the sh7366 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7343 clock framework rewriteMagnus Damm
This patch rewrites the sh7343 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724 clock framework rewrite V3Magnus Damm
This patch contains V3 of the sh7724 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and fll are supported as input clocks to the pll. The div6 clocks are fed through a divide-by-3 block. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7723 clock framework rewrite V2Magnus Damm
This patch contains V2 of the sh7723 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: fix CONFIG_SH_PCLK_FREQ bug for sh7724Kuninori Morimoto
CONFIG_SH_PCLK_FREQ=33333333 is correct for sh7724. sh7724 master clock is 33333333, but peripheral is 41666666. This bug came to light because sh-sci driver had changed clk from "module_clk" to "peripheral_clk" Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: Tidy up SH-4A boot_cpu_data.flags probing.Paul Mundt
This tidies up the boot_cpu_data.flags probing on SH-4A. All of them have a few things in common, which we can blindly set, rather than having each subtype have to set the same flags. We can also make assumptions about cache ways and the validity of PTEA, so this also kills off CPU_HAS_PTEA as a config option. There was also a bug in the FPU probing, which is now tidied up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: Make clock-cpg usable for non-legacy platforms.Paul Mundt
This adds a new SH_CLK_CPG for parts that have CPG support. SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set for platforms that want clock-cpg to register the legacy clocks. With this new config item in place, it is now possible to start layering more generic CPG code in place while other platforms transition off of the legacy clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Update SH7785 for refactored clock framework.Paul Mundt
This updates the SH7785 CPU code as well as the SH7785LCR board support code for making use of the newly refactored clock framework. Support for the legacy CPG clocks is dropped at this point, with the extal frequency fed in from the board code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Rework legacy CPG clock handling.Paul Mundt
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with them on their own, CPUs can gradually move over to the new interface. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: Kill off the remnants of the old timer code.Paul Mundt
Now with all of the TMU users moved over to the new TMU driver, and the old TMU driver killed off, the left-over infrastructure can go along with it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: remove old TMU driverMagnus Damm
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c) As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU and configure timer channel using platform data. If multiple TMU channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_tmu.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: CMT platform data for sh7720/sh7721Magnus Damm
This patch adds CMT platform data for sh7720 and sh7721. All 5 32-bit CMT channels unfortunately share a single IRQ. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Consolidate the boot link and entry offset definitions.Paul Mundt
Consolidate these in a single place in the Kconfig menus. At the same time, disable their interactivity and set them according to the board config defaults. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Provide a tighter BOOT_LINK_OFFSET definition for the Cayman board.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: Always select RTC_LIB, not just for SUPERH32.Paul Mundt
The RTC_LIB helpers are used in arch/sh/kernel/time.c, which was previously only the case for the 32-bit variant. Now that this has become the common implementation, move the RTC_LIB select to reflect that. Fixes up the sh64 build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: Wire up GENERIC_CMOS_UPDATE for the platforms that need it.Paul Mundt
Now that everything has converted over to generic timekeeping, we need an alternate method for keeping the RTC updated for those platforms that are still using the rtc_sh_get/set_time pairs, presently limited to SH-03 and the Dreamcast. This wires up the GENERIC_CMOS_UPDATE hooks for those to maintain the same behaviour. Signed-off-by: Paul Mundt <lethal@linux-sh.org>