aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/drivers
AgeCommit message (Collapse)Author
2009-12-12sh: move machtypes.h to include/generatedSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-11-13sh: dma: Kill off bogus dma_sysclass symbol export.Paul Mundt
This is a static symbol, so the export is wholly superfluous. Recent kbuild updates flagged this as an error, resulting in build failure, so this tidies that up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Kill off superfluous arch/sh/drivers/pci/Kconfig.Paul Mundt
Now that this contains a grand total of 1 Kconfig option, it's hardly worth keeping split out. Roll CONFIG_PCI back in to the top-level architecture Kconfig, along with the other bus types. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Revamp PCI DMA coherence Kconfig bits.Paul Mundt
Leaving this configurable caused more trouble than it was ever worth, so just make it explicit. Boards that are verified one way or the other can fix up their selects accordingly. We presently default to non-coherent for most platforms. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-23Merge branch 'next' of ↵NeilBrown
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into for-linus
2009-09-08dmaengine: sh: Add Support SuperH DMA Engine driverNobuhiro Iwamatsu
This supported all DMA channels, and it was tested in SH7722, SH7780, SH7785 and SH7763. This can not use with SH DMA API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-24sh: Allow use of GENERIC_IOMAPDavid McKay
The synopsys PCI cell used in the later STMicro chips requires code to be run in order to do IO cycles, rather than just memory mapping the IO space. Rather than extending the existing SH infrastructure to allow this, use the GENERIC_IOMAP implmentation to save re-inventing the wheel. This set of changes allows the SH to be built with GENERIC_IOMAP enabled, it just ifdef's out the functions provided by the GENERIC_IOMAP implementation, and provides a few required missing functions. Signed-off-by: David McKay <david.mckay@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-19sh: Add SH7724 support to NR_ONCHIP_DMA_CHANNELSKuninori Morimoto
This patch also update help comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-18sh: Prevent heartbeat from scribbling over non-LED bits.Kuninori Morimoto
While most platforms implement LED banks in sets of 8/16/32, some use different configurations. This adds a LED mask to the heartbeat platform data to allow platforms to constrain the bitmap, which is otherwise derived from the register size. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: pci: Initial PCI-Express support for SH7786 Urquell board.Paul Mundt
This adds initial support for the PCI-Express module in the SH7786, particularly as it relates to the urquell platform. Presently it is only supported in root complex mode, with endpoint mode still requiring more debugging. 29/32-bit mode and lane configurations are selectable via board mode pins, and are otherwise fixed. Only 4x and 1x PCI channels are presently handled, the PCI bridge still requires additional debugging and stabilization in hardware. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: pci: SH7786 PCI ops.Paul Mundt
This adds in preliminary support for the SH7786 PCIe module PCI ops, and the corresponding module definitions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: pci: Allow register_pci_controller() to handle overlapping regions.Paul Mundt
Some host controllers (such as SH7786) have overlapping regions that are fixed in hardware. The resource allocator does the right thing in managing this space already, so the conflict case is non-fatal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: pci: remove duplicated #include'sHuang Weiyi
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-27sh: pci-sh7780: Fix up for PCI_DISABLE_MWI changes.Paul Mundt
This fixes a build error where references to pci_cache_line_size are undefined, as this ceases to be exported when PCI_DISABLE_MWI is enabled, as is now the default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: pci-sh7751: Initialize io_map_base in controller definition.Paul Mundt
As there is only a single controller and remapping has no impact for the address range in question, just initialize it directly in the controller definition. This fixes up boot time warnings about not having the field initialized. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: multiple vectors per irq - sh7760Magnus Damm
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7760 hardware blocks such as DMAC/TMU2/REF. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07sh: Integrate the SH-5 onchip_remap() more coherently.Paul Mundt
Presently this is special-cased for early initialization. While there are situations where these static early initializations are still necessary, with minor changes it is possible to use this for the regular ioremap implementation as well. This allows us to kill off the special-casing for the remap completely and to start tidying up all of the SH-5 special-casing in drivers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Rename pci-new.c to pci.c.Paul Mundt
pci-new.c is now in a state to replace the old pci.c, rename it accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Roll pci-lib in to pci-new.Paul Mundt
Now that the pci-auto cruft is gone, pci-lib can go away. Roll it back in to pci-new.c where it originally split off from. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off the last remnants of the now unused pci-auto code.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/.Paul Mundt
The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Convert dreamcast to new-style interface.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate lboxre2 and r2d IRQ fixups.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Rename SH7751 platform ops files to fixups.Paul Mundt
None of these contain pci_ops, only IRQ routing bits, rename them accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Rewrite SH7751 PCI support to follow SH7780.Paul Mundt
This follows the similar sort of scheme that the refactored SH7780 code uses, using a 64MB CS3 mapping to handle the window0 case, and simply discarding window1. This vastly simplifies the code, and allows most of the board-specific setup to go die. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Rename ops-cayman -> fixups-cayman.Paul Mundt
Now that ops-cayman.c only contains IRQ routing fixups, rename it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Convert the SH-5 code over to the new interface.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Tidy up the dreamcast PCI support.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off legacy ide quirks.Paul Mundt
These fixups seem to have bitrotted a bit since their introduction in the 2.4 days. As we never had much use for them in the first place, and nothing is using them any more, kill them off the rest of the way. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate pcibios_setup() in pci-lib.Paul Mundt
This wasn't really being used for anything useful, so just stub it in pci-lib. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Flag the dreamcast BBA as IORESOURCE_PCI_FIXED.Paul Mundt
This isn't a real BAR, so prevent any attempts to move it, as we don't wish to encourage a bus luck by overzealous PCI initialization code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off superfluous lboxre2 pci fixups.Paul Mundt
This is a verbatim copy of the r2d one, use that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off the now unused hose->io_base.Paul Mundt
Nothing is using this any more, so kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate the remaining common bits.Paul Mundt
This moves the remaining common bits in to pci-lib. Thereby reducing pci.c/pci-new.c to simple bus fixups and controller registration. As more platforms are moved over, the old code will disappear completely and the pci-new bits will be rolled in to pci-lib, eventually replacing pci.c completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate bus<->resource mapping in pci-lib.Paul Mundt
Now that the io and mem offsets are tracked accordingly, the pci-new version of the bus<->resource mappers can be used generically. This moves them in to pci-lib. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Track io and mem_offset per-channel.Paul Mundt
This implements a per-hose offset for I/O and mem resources. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: New-style controller registration.Paul Mundt
This moves off of the board_pci_channels[] approach for bus registration and over to a cleaner register_pci_controller(), all derived from the MIPS code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate pci_iomap() and use the generic I/O base.Paul Mundt
This consolidates the pci_iomap() definitions and reworks how the I/O port base is handled. PCI channels can register their own I/O map base, or if none is provided, the system-wide generic I/O base is used instead. Functionally nothing changes, while this allows us to kill off lots of I/O address special casing and lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off unused pcibios_fixup().Paul Mundt
This is left over cruft that hasn't been used by anything in a long time, kill off bits that weren't purged previously. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate pcibios_align_resource() definitions.Paul Mundt
This introduces a saner pcibios_align_resource() that can be used regardless of whether pci-auto or pci-new are being used, and consolidates it in pci-lib.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: HAVE_PCI_MMAP support.Paul Mundt
Derived from the MIPS version, now uses pgprot_noncached(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Split out new-style PCI core.Paul Mundt
This splits off a 'pci-new.c' which is aimed at gradually replacing the pci-auto backend and the arch/sh/drivers/pci/pci.c core respectively. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Drop asm-generic/pci.h, so we can use our own fixups.Paul Mundt
The new PCI code wants its own bus<->resource mappings instead of the generic equivalents, so drop the asm-generic include in preparation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Start unifying the SH7780 PCIC initialization.Paul Mundt
This starts moving out the common initialization bits from the various fixup paths in to the shared init path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Consolidate SH7780 PCIC IRQ routing.Paul Mundt
Now that the platform code is a bit leaner, we can start consolidating the various IRQ routing implementations. There are effectively only 2 variants, and the others can use those directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Kill off platform-specific multi-window mappings.Paul Mundt
Commit 68b42d1b548be1840aff7122fdebeb804daf0fa3 ("sh: sh7785lcr: Map whole PCI address space.") changed around the semantics of how various chip-selects are made accessible to PCI. Now that there is a single large mapping covering from CS0-CS6, there is no longer any need to do multi-window mapping. Subsequently, all of the differing implementations can be consolidated in to pci-sh7780. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Consolidate PCI I/O and mem window definitions for SH7780.Paul Mundt
This consolidates all of the PCI I/O and memory window definitions across the pci-sh7780 users in pci-sh7780 itself. No functional changes, in that every platform had exactly the same implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Set the I/O port base to the SH7780 I/O window default.Paul Mundt
Presently the I/O port base isn't being set anywhere, which allows things like generic_inl() to blow up. Fix this up to point at the PCI IO window. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Set pci_cache_line_size on SH7780 via the PCICLS register.Paul Mundt
The SH7780 PCIC contains a read-only cache line size register that we can derive pci_cache_line_size from. So, make sure that the software idea of the cache line size actually matches the host controller's idea. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Use the proper write size for class/sub-class code.Paul Mundt
Don't use pci_write_reg() for these, as it defaults to 32-bit. Rather than using the helper, use __raw_writeb() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>