aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel
AgeCommit message (Collapse)Author
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: sh7785lcr: Map whole PCI address space. sh: Fix up DSP context save/restore. sh: Fix up number of on-chip DMA channels on SH7091. sh: update defconfigs. sh: Kill off broken direct-mapped cache mode. sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle. sh: Add a command line option for disabling I/O trapping. sh: Select ARCH_HIBERNATION_POSSIBLE. sh: migor: Fix up CEU use flags. input: migor_ts: add wakeup support rtc: rtc-sh: use set_irq_wake() input: sh_keysc: use enable/disable_irq_wake() sh: intc: set_irq_wake() support sh: intc: install enable, disable and shutdown callbacks clocksource: sh_cmt: use remove_irq() and remove clockevent workaround sh: ap325 and Migo-R use new sh_mobile_ceu_info flags sh: Fix up -Wformat-security whining. sh: ap325rxa: Add ov772x support, again. sh: Sanitize asm/mmu.h for assembly use. sh: Tidy up sh7786 pinmux table. ...
2009-04-04sh: Fix up DSP context save/restore.Michael Trimarchi
There were a number of issues with the DSP context save/restore code, mostly left-over relics from when it was introduced on SH3-DSP with little follow-up testing, resulting in things like task_pt_dspregs() referencing incorrect state on the stack. This follows the MIPS convention of tracking the DSP state in the thread_struct and handling the state save/restore in switch_to() and finish_arch_switch() respectively. The regset interface is also updated, which allows us to finally be rid of task_pt_dspregs() and the special cased task_pt_regs(). Signed-off-by: Michael Trimarchi <michael@evidence.eu.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02Simplify copy_thread()Alexey Dobriyan
First argument unused since 2.3.11. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02sh: Kill off broken direct-mapped cache mode.Paul Mundt
Forcing direct-mapped worked on certain older 2-way set associative parts, but was always error prone on 4-way parts. As these are the norm these days, there is not much point in continuing to support this mode. Most of the folks that used direct-mapped mode generally just wanted writethrough caching in the first place.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.Paul Mundt
cpuidle wants ARCH_HAS_DEFAULT_IDLE defined in order to use the default idle loop. So, make it accessible and enable it for all sh machines. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: Add a command line option for disabling I/O trapping.Paul Mundt
This adds a 'noiotrap' kernel command line option to permit disabling of I/O trapping. This is mostly useful for running on emulators where the physical device limitations are not an issue. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-03-31sh: Fix up -Wformat-security whining.Paul Mundt
Triggers -Werror on gcc-4.3: arch/sh/kernel/setup.c: In function 'early_parse_mem': arch/sh/kernel/setup.c:111: error: format not a string literal and no format arguments ... Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: Tidy up sh7786 pinmux table.Kuninori Morimoto
Formatting and typo fix. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: Remove buggy definition from SH7786 pinmux_data[]Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-30cpumask: remove references to struct irqaction's mask field.Rusty Russell
Impact: cleanup It's unused, since about 1995. So remove all initialization of it in preparation for actually removing the field. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-26Merge branch 'irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits) x86: disable __do_IRQ support sparseirq, powerpc/cell: fix unused variable warning in interrupt.c genirq: deprecate obsolete typedefs and defines genirq: deprecate __do_IRQ genirq: add doc to struct irqaction genirq: use kzalloc instead of explicit zero initialization genirq: make irqreturn_t an enum genirq: remove redundant if condition genirq: remove unused hw_irq_controller typedef irq: export remove_irq() and setup_irq() symbols irq: match remove_irq() args with setup_irq() irq: add remove_irq() for freeing of setup_irq() irqs genirq: assert that irq handlers are indeed running in hardirq context irq: name 'p' variables a bit better irq: further clean up the free_irq() code flow irq: refactor and clean up the free_irq() code flow irq: clean up manage.c irq: use GFP_KERNEL for action allocation in request_irq() kernel/irq: fix sparse warning: make symbol static irq: optimize init_kstat_irqs/init_copy_kstat_irqs ...
2009-03-20sh: disallow kexec virtual entryMagnus Damm
Older versions of kexec-tools has a zImage loader that passes a virtual address as entry point. The elf loader otoh it passes a physical address as entry point, and pages are always passed as physical addresses as well. Only allow physical addresses from now on. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18sh: kexec jump: fix for ftrace.Paul Mundt
Save and restore ftrace state when returning from kexec jump in machine_kexec(). Follows the x86 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18sh: kexec: Drop SR.BL bit toggling.Paul Mundt
For the time being, this creates far more problems than it solves, evident by the second local_irq_disable(). Kill all of this off and rely on IRQ disabling to protect against the VBR reload. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18sh: add kexec jump supportMagnus Damm
Add kexec jump support to the SuperH architecture. Similar to the x86 implementation, with the following exceptions: - Instead of separating the assembly code flow into two parts for regular kexec and kexec jump we use a single code path. In the assembly snippet regular kexec is just kexec jump that never comes back. - Instead of using a swap page when moving data between pages the page copy assembly routine has been modified to exchange the data between the pages using registers. - We walk the page list twice in machine_kexec() to do and undo physical to virtual address conversion. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18sh: rework kexec segment codeMagnus Damm
Rework the kexec code to avoid using P2SEG. Instead we walk the page list in machine_kexec() and convert the addresses from physical to virtual using C. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18sh: simplify kexec vbr codeMagnus Damm
Setup the vbr register in machine_kexec(). This instead of passing values to the assembly snippet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.Paul Mundt
This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores that implement the PTAEX register and respective functionality. Presently only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs). The main change is in how the PTE is written out when loading the entry in to the TLB, as well as in how the TLB entry is selectively flushed. While SH-X2 extended mode splits out the memory-mapped U and I-TLB data arrays for extra bits, extended ASID mode splits out the address arrays. While we don't use the memory-mapped data array access, the address array accesses are necessary for selective TLB flushes, so these are implemented newly and replace the generic SH-4 implementation. With this, TLB flushes in switch_mm() are almost non-existent on newer parts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16sh: clkfwk: Safer resume from hibernation.Francesco VIRLINZI
This patch fixes a possible problem in the resume from hibenration. It temporaneally saves the clk->rate on the stack to avoid any possible change during the clk->set_parent(..) call. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16sh: Consolidate SH-Mobile CPU code in arch/sh/kernel/cpu/shmobile/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16sh: SuperH Mobile suspend supportMagnus Damm
This patch contains CONFIG_SUSPEND support to the SuperH architecture. If enabled, SuperH Mobile processors will register their suspend callbacks during boot. To suspend, use "echo mem > /sys/power/state". To allow wakeup, make sure "/sys/device/platform/../power/wakeup" contains "enabled". Additional per-device driver patches are most likely needed. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16sh: Fix compile error by operands(mov.l) in sh3/entry.SNobuhiro Iwamatsu
-- log -- arch/sh/kernel/cpu/sh4/../sh3/entry.S:365: Error: invalid operands for opcode make[4]: *** [arch/sh/kernel/cpu/sh4/../sh3/entry.o] Error 1 make[3]: *** [arch/sh/kernel/cpu/sh4] Error 2 -- log -- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16sh: Add OHCI USB support for SH7786Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16Merge branches 'irq/genirq' and 'linus' into irq/coreIngo Molnar
2009-03-11sh: clkfwk: Add resume from hibernation support.Francesco VIRLINZI
This patch adds PM support to the clock framework. With this, resume from hibernation is properly supported. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-11sh: clkfwk: add clk_set_parent/clk_get_parentFrancesco VIRLINZI
This patch adds the clk_set_parent/clk_get_parent routines to the sh clock framework. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Support fixed 32-bit PMB mappings from bootloader.Yoshihiro Shimoda
This provides a method for supporting fixed PMB mappings inherited from the bootloader, as an alternative to the dynamic PMB mapping currently used by the kernel. In the future these methods will be combined. P1/P2 area is handled like a regular 29-bit physical address, and local bus device are assigned P3 area addresses. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: hibernation supportMagnus Damm
Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support to the SuperH architecture. To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state" To resume, pass "resume=/dev/sda2" on the kernel command line. The patch "pm: rework includes, remove arch ifdefs V2" is needed to allow the generic swsusp code to build properly. Hibernation is not enabled with this patch though, a patch setting ARCH_HIBERNATION_POSSIBLE will be submitted later. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7720.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7710.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7705.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh770x.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - mxg.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7619.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7206.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7201.Paul Mundt
Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7263.Paul Mundt
Convert over the SH7263 IRQ groups as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7203.Paul Mundt
Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: Restore RTC IRQ setting for SH7763 setup.Nobuhiro Iwamatsu
This was accidentally dropped in the multiple vectors per irq conversion. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7763Nobuhiro Iwamatsu
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7763 hardware blocks such as RTC/SCIF/DMAC/GETHER/PCIC5/MMCIF/SIM/GPIO/USBF. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: Add support for SH7786 CPU subtype.Kuninori Morimoto
This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: Fix up SH-X3 general exception handler build.Paul Mundt
With the recent entry.S refactoring, the SH-X3 path had a mov.l for a register to register copy, resulting in: AS arch/sh/kernel/cpu/sh4/../sh3/entry.o arch/sh/kernel/cpu/sh4/../sh3/entry.S: Assembler messages: arch/sh/kernel/cpu/sh4/../sh3/entry.S:366: Error: invalid operands for opcode make[3]: *** [arch/sh/kernel/cpu/sh4/../sh3/entry.o] Error 1 Switch it over to a mov to fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - sh7785Magnus Damm
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7785 hardware blocks such as SCIF/DMAC/PCIC5/MMCIF/GDTA/FLCTL/GPIO Signed-off-by: Magnus Damm <damm@igel.co.jp> Tested-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - sh7780Magnus Damm
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7780 hardware blocks such as SCIF/RTC/DMAC/PCIC5/MMCIF/FLCTL/GPIO Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - sh7750Magnus Damm
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh775x hardware blocks such as SCI/SCIF/RTC/DMAC/TMU2/REF. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - baseMagnus Damm
Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: prefetch early exception data on sh4/sh4a.Magnus Damm
Prefetch early exception data. There is unused space in our exception handler cache line anyway, so this is almost free. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: remove EXPEVT vector from stack on sh3/sh4/sh4aMagnus Damm
Remove EXPEVT vector from the stack, lookup_exception_vector() for sh3/sh4/sh4a is already using k2 to get the vector. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: rework register restore code for sh3/sh4/sh4aMagnus Damm
This patch reworks the sh3/sh4/sh4a register restore code in the following ways: - break out restore_regs() from restore_all() - the register saving order is unchanged - use restore_regs() in sh_bios_handler and restore_all - document the function Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>