aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/mm
AgeCommit message (Collapse)Author
2009-12-15Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-12-14sh: wire up vmallocinfo support in ioremap() implementations.Paul Mundt
This wires up the caller information for the ioremap VMA, which allows for more helpful caller tracking via /proc/vmallocinfo. Follows the x86 and powerpc changes of the same nature. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-11fix broken aliasing checks for MAP_FIXED on sparc32, mips, arm and shAl Viro
We want addr - (pgoff << PAGE_SHIFT) consistently coloured... Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-09sh: NUMA lmb fixesMagnus Damm
This patch updates the NUMA version of setup_memory() with UMA code changes and also modifies the last argument to lmb_alloc_base() to use an address instead of pfn. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: fix size calculation for NUMA node 0Magnus Damm
Fix the NUMA size calculation for node 0. Do the same as the UMA version of setup_memory() and use address instead of pfn when calculating the size. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: Can't compare physical and virtual addresses for aliasesMatt Fleming
It does not make sense to compare virtual and physical addresses for aliasing, only virtual addresses can be compared for aliases. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04sh: Drop associative writes for SH-4 cache flushes.Matt Fleming
When flushing/invalidating the icache/dcache via the memory-mapped IC/OC address arrays, the associative bit should only be used in conjunction with virtual addresses. However, we currently flush cache lines based on physical address, so stop using the associative bit. It is a better strategy to use non-associative writes (and physical tags) for flushing the caches anyway, because flushing by virtual address (as with the A-bit set) requires a valid TLB entry for that virtual address. If one does not exist in the TLB no exception is generated and the flush is silently ignored. This is also future-proofing for SH-4A parts which are gradually phasing out associative writes to the cache array due to the aforementioned case of certain flushes silently turning in to nops. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04sh: Partial revert of copy/clear_user_highpage() optimizations.Paul Mundt
These still require more testing, so revert them for now. We keep the off-by-1 in the fixmap colouring and drop the rest. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-24sh: Improve performance of SH4 versions of copy/clear_user_highpageStuart Menefy
The previous implementation of clear_user_highpage and copy_user_highpage checked to see if there was a D-cache aliasing issue between the user and kernel mappings of a page, but if there was they always did a flush with writeback on the dirtied kernel alias. However as we now have the ability to map a page into kernel space with the same cache colour as the user mapping, there is no need to write back this data. Currently we also invalidate the kernel alias as a precaution, however I'm not sure if this is actually required. Also correct the definition of FIX_CMAP_END so that the mappings created by kmap_coherent() are actually at the correct colour. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-12sh64: Fix up reworked cache op build.Paul Mundt
This gets the build fixed up for the sh64 cache enabled case. Disabling still needs further abstraction for independent I/D-cache disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-11sh: Enable PMB support for all SH-4A CPUs.Paul Mundt
Presently the PMB options were limited to a number of CPUs they were tested with, but it is generally available on all SH-4A CPUs, so just drop the subtype conditionals. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-09Merge branch 'sh/stable-updates'Paul Mundt
2009-11-09sh: Account for cache aliases in flush_icache_range()Matt Fleming
The icache may also contain aliases so we must account for them just like we do when manipulating the dcache. We usually get away with aliases in the icache because the instructions that are read from memory are read-only, i.e. they never change. However, the place where this bites us is when the code has been modified. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04sh: Make sure indexes are positiveRoel Kluin
The indexes are signed, make sure they are not negative when we read array elements. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Do not apply virt_to_phys() to a physical addressMatt Fleming
The variable 'phys' already contains the physical address to flush. It is not a virtual address and should not be passed to virt_to_phys(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27Merge branch 'sh/stable-updates'Paul Mundt
2009-10-27sh: Bump up dma_ops initialization far earlier in the boot process.Paul Mundt
Presently this was tacked on to the dma debug init bits from fs_initcall(), which is far too late for devices setting up their own per-device coherent areas. Throw this in the beginning of mem_init(), as per the x86 iommu allocation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh64: cache flush symbol exports.Paul Mundt
These were previously hidden in sh_ksyms_32, despite also being needed for sh64 now that the cache.c code is shared. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.Paul Mundt
The hugetlb dependencies presently depend on SUPERH && MMU while the hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This unfortunately allows SH-3 + MMU configurations to enable hugetlbfs without a corresponding HPAGE_SHIFT definition, resulting in the build blowing up. As SH-3 doesn't support variable page sizes, we tighten up the dependenies a bit to prevent hugetlbfs from being enabled. These days we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using that rather than adding to the list of corner cases in fs/Kconfig. Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: Add dma-mapping support for dma_alloc/free_coherent() overrides.Paul Mundt
This moves the current dma_alloc/free_coherent() calls to a generic variant and plugs them in for the nommu default. Other variants can override the defaults in the dma mapping ops directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-20sh: Convert to asm-generic/dma-mapping-common.hPaul Mundt
This converts the old DMA mapping support to the new generic dma-mapping-common.h abstraction. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16sh: Support SCHED_MC for SH-X3 multi-cores.Paul Mundt
This enables SCHED_MC support for SH-X3 multi-cores. Presently this is just a simple wrapper around the possible map, but this allows for tying in support for some of the more exotic NUMA clusters where we can actually do something with the topology. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16Merge branch 'sh/stable-updates'Paul Mundt
Conflicts: arch/sh/mm/cache-sh4.c
2009-10-16sh: disabled cache handling fix.Magnus Damm
Add code to handle the cache disabled case. Fixes breakage introduced by 37443ef3f0406e855e169c87ae3f4ffb4b6ff635 ("sh: Migrate SH-4 cacheflush ops to function pointers."). Without this patch configuring caches off with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev deferred io or early user space. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16sh: Fix up single page flushing to use PAGE_SIZE.Valentin Sitdikov
Presently The SH-4 cache flushing code uses flush_cache_4096() for most of the real flushing work, which breaks down to a fixed 4096 unroll and increment. Not only is this sub-optimal for larger page sizes, it's also uncovered a bug in sh4_flush_dcache_page() when large page sizes are used and we have no cache aliases -- resulting in only a part of the page's D-cache lines being written back. Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13Merge branch 'sh/stable-updates'Paul Mundt
2009-10-13sh: force dcache flush if dcache_dirty bit set.Paul Mundt
This too follows the ARM change, given that the issue at hand applies to all platforms that implement lazy D-cache writeback. This fixes up the case when a page mapping disappears between the flush_dcache_page() call (when PG_dcache_dirty is set for the page) and the update_mmu_cache() call -- such as in the case of swap cache being freed early. This kills off the mapping test in update_mmu_cache() and switches to simply testing for PG_dcache_dirty. Reported-by: Nitin Gupta <ngupta@vflare.org> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Fold fixed-PMB support into dynamic PMB supportMatt Fleming
The initialisation process differs for CONFIG_PMB and for CONFIG_PMB_FIXED. For CONFIG_PMB_FIXED we need to register the PMB entries that were allocated by the bootloader. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Fix the offset from P1SEG/P2SEG where we map RAMMatt Fleming
We need to map the gap between 0x00000000 and __MEMORY_START in the PMB, as well as RAM. With this change my 7785LCR board can switch to 32bit MMU mode at runtime. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Remap physical memory into P1 and P2 in pmb_init()Matt Fleming
Eventually we'll have complete control over what physical memory gets mapped where and we can probably do other interesting things. For now though, when the MMU is in 32-bit mode, we map physical memory into the P1 and P2 virtual address ranges with the same semantics as they have in 29-bit mode. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Get rid of the kmem cache codeMatt Fleming
Unfortunately, at the time during in boot when we want to be setting up the PMB entries, the kmem subsystem hasn't been initialised. We now match pmb_map slots with pmb_entry_list slots. When we find an empty slot in pmb_map, we set the bit, thereby acquiring the corresponding pmb_entry_list entry. There is a benefit in using this static array of struct pmb_entry's; we don't need to acquire any locks in order to traverse the list of struct pmb_entry's. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Make most PMB functions staticMatt Fleming
There's no need to export the internal PMB functions for allocating, freeing and modifying PMB entries, etc. This way we can restrict the interface for PMB. Also remove the static from pmb_init() so that we have more freedom in setting up the initial PMB entries and turning on MMU 32bit mode. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: CONFIG_PMB doesn't mean the MMU is in 32bit modeMatt Fleming
CONFIG_PMB will eventually allow the MMU to be switched between 29-bit and 32-bit mode dynamically at runtime. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Prepare for dynamic PMB supportMatt Fleming
To allow the MMU to be switched between 29bit and 32bit mode at runtime some constants need to swapped for functions that return a runtime value. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Obliterate the P1 area macrosMatt Fleming
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the idea that all addresses in P1SEG are untranslated, so we can access an address's physical page as an offset from P1SEG. This doesn't work for CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used for PMB mappings and so can be translated to any physical address. Likewise, replace a P1SEGADDR() use with virt_to_phys(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Allocate PMB entry slot earlierMatt Fleming
Simplify set_pmb_entry() by removing the possibility of not finding a free slot in the PMB. Instead we now allocate a slot in pmb_alloc() so that if there are no free slots we fail at allocation time, rather than in set_pmb_entry(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10Merge branch 'sh/cachetlb'Paul Mundt
2009-10-09sh: Don't allocate smaller sized mappings on every iterationMatt Fleming
Currently, we've got the less than ideal situation where if we need to allocate a 256MB mapping we'll allocate four entries like so, entry 1: 128MB entry 2: 64MB entry 3: 16MB entry 4: 16MB This is because as we execute the loop in pmb_remap() we will progressively try mapping the remaining address space with smaller and smaller sizes. This isn't good because the size we use on one iteration may be the perfect size to use on the next iteration, for instance when the initial size is divisible by one of the PMB mapping sizes. With this patch, we now only need two entries in the PMB to map 256MB of address space, entry 1: 128MB entry 2: 128MB Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Try PMB mapping based on physical address, not mapping sizeMatt Fleming
We should favour PMB mappings when the physical address cannot be reached with 29-bits. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Plug PMB alloc memory leakMatt Fleming
If we fail to allocate a PMB entry in pmb_remap() we must remember to clear and free any PMB entries that we may have previously allocated, e.g. if we were allocating a multiple entry mapping. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Sprinkle __uses_jump_to_uncachedMatt Fleming
Fix some callers of jump_to_uncached() and back_to_cached() that were not annotated with __uses_jump_to_uncached. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-23kcore: use registerd physmem informationKAMEZAWA Hiroyuki
For /proc/kcore, each arch registers its memory range by kclist_add(). In usual, - range of physical memory - range of vmalloc area - text, etc... are registered but "range of physical memory" has some troubles. It doesn't updated at memory hotplug and it tend to include unnecessary memory holes. Now, /proc/iomem (kernel/resource.c) includes required physical memory range information and it's properly updated at memory hotplug. Then, it's good to avoid using its own code(duplicating information) and to rebuild kclist for physical memory based on /proc/iomem. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: register vmalloc area in generic wayKAMEZAWA Hiroyuki
For /proc/kcore, vmalloc areas are registered per arch. But, all of them registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies them. By this. archs which have no kclist_add() hooks can see vmalloc area correctly. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: add kclist typesKAMEZAWA Hiroyuki
Presently, kclist_add() only eats start address and size as its arguments. Considering to make kclist dynamically reconfigulable, it's necessary to know which kclists are for System RAM and which are not. This patch add kclist types as KCORE_RAM KCORE_VMALLOC KCORE_TEXT KCORE_OTHER This "type" is used in a patch following this for detecting KCORE_RAM. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22arches: drop superfluous casts in nr_free_pages() callersGeert Uytterhoeven
Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()") modified nr_free_pages() to return 'unsigned long' instead of 'unsigned int'. This made the casts to 'unsigned long' in most callers superfluous, so remove them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <zankel@tensilica.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sh: Fix up sh7705 flush_dcache_page() build.Paul Mundt
Type mismatch caused the page deref to blow up, fix it up as per the sh4 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Factor in cpu id for selection of cache colour fixmap.Paul Mundt
In the SMP VIPT case the page copy/clear ops still perform colouring, care needs to be taken that CPUs don't end up stepping on each other, so we give them a bit of room to work with. At the same time, we reduce the worst-case colouring given that these pages are always consumed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Fix up redundant cache flushing for PAGE_SIZE > 4k.Paul Mundt
If PAGE_SIZE is presently over 4k we do a lot of extra flushing given that we purge the cache 4k at a time. Make it explicitly 4k per iteration, rather than iterating for PAGE_SIZE before looping over again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Rework sh4_flush_cache_page() for coherent kmap mapping.Paul Mundt
This builds on top of the MIPS r4k code that does roughly the same thing. This permits the use of kmap_coherent() for mapped pages with dirty dcache lines and falls back on kmap_atomic() otherwise. This also fixes up a problem with the alias check and defers to shm_align_mask directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>