aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2010-01-04sh: update defconfigs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-04sh: Don't default enable PMB support.Paul Mundt
This has the adverse effect of converting many 29bit configs to 32bit mode, while this is a change that needs to be done manually for each platform. Turn it off by default in order to cut down on spurious bug reports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-04sh: Disable PMB for SH4AL-DSP CPUs.Paul Mundt
While the PMB is available on SH-4A parts, SH4AL-DSP parts exclude it altogether. As such, explicitly disable PMB support for these parts. If this changes in the future for newer subtypes, this will have to be made more fine-grained. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-29sh: Only provide a PCLK definition for legacy CPG CPUs.Paul Mundt
As CPUs are migrated over to more fully-featured clock frameworks of their own and off of the legacy CPG code, they no longer have any real need for defining the PCLK value. The PCLK define in itself is already fairly misleading, as many boards get their input clocks from different sources, making this value fairly arbitrary anyways. Outside of the legacy CPG clock framework, the only place where this value is used is for deriving CLOCK_TICK_RATE, which we set back to the legacy PIT value that it was before the PCLK definitions were added in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24Merge branch 'sh/g3-prep' into sh/for-2.6.33Paul Mundt
2009-12-24sh: Ensure all PG_dcache_dirty pages are written back.Markus Pietrek
With some of the cache rework an address aliasing optimization was added, but this managed to fail on certain mappings resulting in pages with PG_dcache_dirty set never writing back their dcache lines. This patch reverts to the earlier behaviour of simply always writing back when the dirty bit is set. Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24sh: mach-ecovec24: setup.c detailed correctionKuninori Morimoto
o remove unused define o add device name comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-21sh: Only use bl bit toggling for sleeping idle.Paul Mundt
We don't actually require this in the cpu_relax() polling case, so just cuddle these around the sleeping version. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-21sh: Restore bl bit toggling in idle loop.Paul Mundt
This fixes up some crashes with IRQs racing the need_resched() test under QEMU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-17Merge branch 'for-33' of git://repo.or.cz/linux-kbuildLinus Torvalds
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits) net: fix for utsrelease.h moving to generated gen_init_cpio: fixed fwrite warning kbuild: fix make clean after mismerge kbuild: generate modules.builtin genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}() score: add asm/asm-offsets.h wrapper unifdef: update to upstream revision 1.190 kbuild: specify absolute paths for cscope kbuild: create include/generated in silentoldconfig scripts/package: deb-pkg: use fakeroot if available scripts/package: add KBUILD_PKG_ROOTCMD variable scripts/package: tar-pkg: use tar --owner=root Kbuild: clean up marker net: add net_tstamp.h to headers_install kbuild: move utsrelease.h to include/generated kbuild: move autoconf.h to include/generated drop explicit include of autoconf.h kbuild: move compile.h to include/generated kbuild: drop include/asm kbuild: do not check for include/asm-$ARCH ... Fixed non-conflicting clean merge of modpost.c as per comments from Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h that needed to be changed to generated/autoconf.h)
2009-12-17sh: Fix up MAX_DMA_CHANNELS definition when DMA is disabled.Paul Mundt
MAX_DMA_CHANNELS is tested for the total number of channels in order to populate an IRQ map. Stub this out completely when no DMA support is enabled -- as used to be the default behaviour before this was generalized for use by the dmaengine code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-17sh: dmaengine support for SH7785Nobuhiro Iwamatsu
Add dmaengine platform device to SH7785. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-17sh: dmaengine support for sh7724.Guennadi Liakhovetski
Add a dmaengine platform device to sh7724, fix DMA channel interrupt numbers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
2009-12-16Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (116 commits) V4L/DVB (13698): pms: replace asm/uaccess.h to linux/uaccess.h V4L/DVB (13690): radio/si470x: #include <sched.h> V4L/DVB (13688): au8522: modify the attributes of local filter coefficients V4L/DVB (13687): cx231xx: use NULL when pointer is needed V4L/DVB: Davinci VPFE Capture: remove unused #include <linux/version.h> V4L/DVB (13685): Correct code taking the size of a pointer V4L/DVB (13684): Fix some cut-and-paste noise in dib0090.h V4L/DVB (13683): sanio-ms: clean up init, exit and id_table V4L/DVB (13682): dib8000: make some constant static V4L/DVB: lgs8gxx: Use shifts rather than multiply/divide when possible V4L/DVB (13680b): DocBook/media: create links for included sources V4L/DVB (13680a): DocBook/media: copy images after building HTML V4L/DVB (13678): Add support for yet another DvbWorld, TeVii and Prof USB devices V4L/DVB (13676): configurable IRQ mode on NetUP Dual DVB-S2 CI; IRQ from CAM processing (CI interface works faster) V4L/DVB (13674): stv090x: Add DiSEqC envelope mode V4L/DVB (13673): lnbp21: Implement 22 kHz tone control V4L/DVB (13671): sh_mobile_ceu_camera: Remove frame size page alignment V4L/DVB (13670): soc-camera: Add mt9t112 camera driver V4L/DVB (13669): tw9910: Add sync polarity support V4L/DVB (13668): tw9910: remove cropping ...
2009-12-16elf: kill USE_ELF_CORE_DUMPChristoph Hellwig
Currently all architectures but microblaze unconditionally define USE_ELF_CORE_DUMP. The microblaze omission seems like an error to me, so let's kill this ifdef and make sure we are the same everywhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: <linux-arch@vger.kernel.org> Cc: Michal Simek <michal.simek@petalogix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict ↵Guennadi Liakhovetski
sizes, add platform data It has been experimentally found out, that the sensor only supports up to 512x384 video output and also has some restrictions on minimum scale. We disable non-working size ranges until, maybe, someone finds out how to properly set them up. Also add cropping support, an auto white balance control, platform data to specify master clock frequency and polarity of the IOCTL pin. create mode 100644 include/media/rj54n1cb0c.h Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13659): soc-camera: convert to the new mediabus APIGuennadi Liakhovetski
Convert soc-camera core and all soc-camera drivers to the new mediabus API. This also takes soc-camera client drivers one step closer to also be usable with generic v4l2-subdev host drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in ↵Guennadi Liakhovetski
struct soc_camera_link After this change drivers can be further extended to not fail, if they don't get platform data, but to use defaults. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16sh: Fix test of unsigned in se7722_irq_demux()Roel Kluin
se7722_fpga_irq[] is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add FSI sound supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add mt9t112 camera supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add tw9910 supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: MSIOF/mmc_spi platform data for the Ecovec24 boardMagnus Damm
This patch adds MSIOF and mmc_spi platform data for the CN11 port on the SuperH Ecovec24 board. No card detect interrupt is available so the MMC code is configured to poll. The WP signal is implemented together with CD and power control. The board only supports 3.3V power. The platform data is wrapped in SDHI #ifdefs to allow both the SDHI and the MSIOF to coexist. Only one configuration is allowed at a time. The pin routing is selected by a dip switch but we can unfortunately not detect this setting at run time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-12-15sh: ms7724se: Add ak4642 supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: Fix up FPU build for SH5Matt Fleming
After the recent FPU optimisation commit the signature of save_fpu() changed. "regs" wasn't used in the implementation of save_fpu() anyway. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: Remove old early serial console code V2Magnus Damm
Now when the sh-sci driver can do early serial output, get rid of the old duplicated code. This patch is V2 and removes support for "earlyprintk=serial" together with the following kconfig options: CONFIG_EARLY_SCIF_CONSOLE CONFIG_EARLY_SCIF_CONSOLE_PORT CONFIG_EARLY_PRINTK With this patch applied "earlyprintk=" support is always built-in the SuperH kernel. For this to work the serial driver must have early platform support and in the case of sh-sci the serial console needs to be enabled: CONFIG_SERIAL_SH_SCI_CONSOLE=y So after enabling the SuperH SCI console kconfig option you also need to point out port using the kernel command line: "earlyprintk=sh-sci.N[,baudrate][,keep]" Remember that clocks may be disabled by the boot loader so you may have to do some board specific static clock setup before earlyprintk will work on your platform. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh5 scif pdata (sh5-101/sh5-103)Magnus Damm
This patch breaks out the sh5 scif serial port platform data from a shared platform device to one platform device per port. Also, move the serial port to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)Magnus Damm
This patch breaks out the sh4a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. All sh4a except SuperH Mobile processors are modified by this patch. While at it, sh7757 gets early platform device support. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)Magnus Damm
This patch breaks out the sh4a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Only sh4a SuperH Mobile processors are modified by this patch. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh4 scif pdata (sh7750/sh7760/sh4-202)Magnus Damm
This patch breaks out the sh4 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. While at it, get rid of the R2D ifdef in the processor code and adjust the defconfigs to use ttySC1. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)Magnus Damm
This patch breaks out the sh3 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg)Magnus Damm
This patch breaks out the sh2a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: sh2 scif pdata (sh7616)Magnus Damm
This patch breaks out the sh2 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh-sci: Extend sh-sci driver with early console V2Magnus Damm
This is V2 of early serial console support for the sh-sci driver. The early serial console is using early platform devices and "earlyprintk". To use this feature the early platform devices must be broken out to one device per port and the desired port should be selected on the kernel command line like: "earlyprintk=sh-sci.N[,baudrate][,keep]" Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-14genirq: Convert irq_desc.lock to raw_spinlockThomas Gleixner
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14locking: Convert raw_rwlock functions to arch_rwlockThomas Gleixner
Name space cleanup for rwlock functions. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert raw_rwlock to arch_rwlockThomas Gleixner
Not strictly necessary for -rt as -rt does not have non sleeping rwlocks, but it's odd to not have a consistent naming convention. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert __raw_spin* functions to arch_spin*Thomas Gleixner
Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKEDThomas Gleixner
Further name space cleanup. No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert raw_spinlock to arch_spinlockThomas Gleixner
The raw_spin* namespace was taken by lockdep for the architecture specific implementations. raw_spin_* would be the ideal name space for the spinlocks which are not converted to sleeping locks in preempt-rt. Linus suggested to convert the raw_ to arch_ locks and cleanup the name space instead of using an artifical name like core_spin, atomic_spin or whatever No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14sh: Stub in P3 ioremap support for nommu parts.Paul Mundt
p3_ioremap() references __ioremap() which is presently undefined on nommu. This provides a trivial stub to fix the build up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-14sh: wire up vmallocinfo support in ioremap() implementations.Paul Mundt
This wires up the caller information for the ioremap VMA, which allows for more helpful caller tracking via /proc/vmallocinfo. Follows the x86 and powerpc changes of the same nature. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-14sh: Make the unaligned trap handler always obey notification levels.Paul Mundt
Presently there are a couple of paths in to the alignment handler, where only the address error path presently quiets the notificiation messages based on the configuration settings. We carry over the notification level tests to the default alignment handler itself incase so that they behave uniformly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-14sh: Couple kernel and user write page perm bits for CONFIG_X2TLBMatt Fleming
pte_write() should check whether the permissions include either the user or kernel write permission bits. Likewise, pte_wrprotect() needs to remove both the kernel and user write bits. Without this patch handle_tlbmiss() doesn't handle faulting in pages from the P3 area (our vmalloc space) because of a write. Mappings of the P3 space have the _PAGE_EXT_KERN_WRITE bit but not _PAGE_EXT_USER_WRITE. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-12sh: move machtypes.h to include/generatedSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12kbuild: move asm-offsets.h to include/generatedSam Ravnborg
The simplest method was to add an extra asm-offsets.h file in arch/$ARCH/include/asm that references the generated file. We can now migrate the architectures one-by-one to reference the generated file direct - and when done we can delete the temporary arch/$ARCH/include/asm/asm-offsets.h file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-11fix broken aliasing checks for MAP_FIXED on sparc32, mips, arm and shAl Viro
We want addr - (pgoff << PAGE_SHIFT) consistently coloured... Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11Unify sys_mmap*Al Viro
New helper - sys_mmap_pgoff(); switch syscalls to using it. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>