aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2007-06-08sh: Wrap CPU tuning through cc-option.Paul Mundt
Some compilers don't support the explicit CPU tuning, while binutils is still able to handle the special subtype-specific opcodes. Make the CFLAG optional, falling back on the compiler default if nothing better exists. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Enable IPR-IRQ for SH7206.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Mark sparsemem regions present earlier.Paul Mundt
We have to call in to sparse_memory_present_with_active_regions() earlier in order for sparsemem to be happy. This was being called too late, and was causing troubles with the platforms that needed to enable sparsemem. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Register multiple nodes in topology_init().Paul Mundt
If we have multiple nodes, register these at topology_init() time. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Allow for bootmem debug support.Paul Mundt
Handy for debugging bootmem troubles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: sparsemem support.Paul Mundt
This implements basic sparsemem support for SH. Presently this only uses static sparsemem, and we still permit explicit selection of flatmem. Those boards that want sparsemem can select it as usual. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Add L-BOX RE2 to mach-types.Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Align .machvec.init section on a 4-byte boundary.Takashi YOSHII
.machvec.init can be misaligned with the recent machvec changes, forcibly align it on the boundary that it expects, as before. Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fix SH-4 CPU selects.Paul Mundt
Now that select no longer works for selecting the "closest" CPU, we have to explicitly reference the precise sub-type in the few places where it actually matters (presently only setup code and some legacy sh-sci cruft). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Rip out special unknown machvec.Paul Mundt
This kills off the BareCPU board as a "special" machvec, rather, we leave this as a default for when no other vector is available, or when we want to use it in combination with other vectors for testing with generic ops. As sh_mv is copied out anyways (or overloaded when an alternate vector is explicitly selected), this doesn't consume any additional memory. The generic machvec can be forcibly selected with sh_mv=generic, or by not having any other boards enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off machvec aliases.Paul Mundt
We now throw all of the machvecs in to .machvec.init and either select one on the command line, or copy out the first (and usually only) one to sh_mv. The rest are freed as usual. This gets rid of all of the silly sh_mv aliasing and makes the selection explicit rather than link-order dependent. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Get multiple boards in one image working again.Paul Mundt
This tidies up the build rules and permits multiple boards to be linked in to the same kernel. The earlier Kconfig work ensures that the CPU configuration is consistent across the boards, as this is the only thing that we can't do dynamically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fixup cmdline handling from machvec changes.Paul Mundt
The command line wasn't being saved off properly after the machvec changes went in, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Rework CPU/board dependencies.Paul Mundt
This was a big mess, rework the logic a bit so that we constrain to a particular subtype and figure out the board support based on that. This makes building subtype specific kernels supporting multiple boards possible again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Shut up SH2-DSP compile warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fixup machvec support.Paul Mundt
This fixes up much of the machvec handling, allowing for it to be overloaded on boot. Making practical use of this still requires some Kconfig munging, however. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: __user annotations for __get/__put_user().Paul Mundt
This adds in some more __user annotations. These weren't being handled properly in some of the __get_user and __put_user paths, so tidy those up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Split out CPU topology initialization.Paul Mundt
Split out the CPU topology initialization to a separate file, and switch it to a percpu type, rather than an NR_CPUS array. At the same time, switch to only registering present CPUs, rather than using the possible CPU map. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix se73180 platform device registration.Paul Mundt
Copy and paste error from se7343, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: ioremap() through PMB needs asm/mmu.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: voyagergx: Fix build warnings.Paul Mundt
pr_debug() was using a %x on an unsigned long, which was making the build a bit noisy. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix SH4-202 clock fwk set_rate() mismatch.Paul Mundt
With the SH7722 changes, ->set_rate() also takes an algo_id, SH4-202 was overlooked when this change went in. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: microdev: Fix compile warnings.Paul Mundt
irq.c needs linux/interrupt.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix in_nmi symbol build error.Paul Mundt
If CONFIG_KGDB_NMI is disabled, we're left with a stray in_nmi reference that can't be resolved. Move the symbol under the ifdef, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: support older gcc'sAndrew Morton
Make my version of gcc happy. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: trivial build cleanups.Evgeniy Polyakov
Several errors were spotted during building for custom config (SMP included). Although SMP still does not compile (no ipi and __smp_call_function) and does not work, this looks a bit cleaner. Some other errors obtained via gcc-4.1.0 build. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Fix vsyscall build failure.Manuel Lauss
CC arch/sh/kernel/vsyscall/vsyscall.o a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_setup_additional_pages': a/arch/sh/kernel/vsyscall/vsyscall.c:63: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:67: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:82: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c:85: error: dereferencing pointer to incomplete type a/arch/sh/kernel/vsyscall/vsyscall.c: In function 'arch_vma_name': a/arch/sh/kernel/vsyscall/vsyscall.c:91: error: dereferencing pointer to incomplete type Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Trivial fix for dma-api compile failure.Manuel Lauss
Trivial fix for arch/sh/drivers/dma/dma-api.c compile failure: CC arch/sh/drivers/dma/dma-api.o a/arch/sh/drivers/dma/dma-api.c: In function 'dma_wait_for_completion': a/arch/sh/drivers/dma/dma-api.c:233: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) a/arch/sh/drivers/dma/dma-api.c:233: error: (Each undeclared identifier is reported only once a/arch/sh/drivers/dma/dma-api.c:233: error: for each function it appears in.) a/arch/sh/drivers/dma/dma-api.c:233: warning: implicit declaration of function 'schedule' Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31sh: Fix pcrel too far for in_nmi label.Takashi YOSHII
Add lost in_nmi definition to solve pcrel too far. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-23sh: section mismatch fixes for system timer.Paul Mundt
Fix up a couple of section mismatch warnings regarding sys_timer. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-22Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix dreamcast build for IRQ changes. sh: Fix clock multiplier on SH7722. sh: Wire up kdump crash kernel exec in die(). sh: sr.bl toggling around idle sleep. sh: disable genrtc support. fs: Kill sh dependency for binfmt_flat. sh: Disable psw support for R7785RP. sh: Fix page size alignment in __copy_user_page(). sh: Fix up various compile warnings for SE boards. sh: Wire up signalfd/timerfd/eventfd syscalls. sh: revert addition of page fault notifiers spelling fixes: arch/sh/ input: hp680_ts compile fixes. sh: landisk: Header cleanups. sh: landisk: rtc-rs5c313 support. sh: Kill off pmb slab cache destructor. sh: Fix up psw build rules for r7780rp. sh: Shut up compiler warnings in __do_page_fault().
2007-05-21sh: Fix clock multiplier on SH7722.dmitry pervushin
This fixes up the master clock multiplier and initial rate propagation for the SH7722 clocks. Signed-off-by: dmitry pervushin <dimka@nomadgs.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Wire up kdump crash kernel exec in die().Paul Mundt
Now that we have the basic kdump support in place, add it in to die() so we can enter the crash kernel automatically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: sr.bl toggling around idle sleep.Paul Mundt
As pointed out by Saito-san, without the sr.bl manipulation we can occasionally hit delays in the idle loop due to interrupt handling, so ensure that interrupts are blocked before going to sleep. At the same time, we throw in TIF_POLLING_NRFLAG for the !hlt_counter case (primarily used by the ST-40 parts). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Disable psw support for R7785RP.Paul Mundt
While R7780RP and R7780MP support this, R7785RP does not. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix page size alignment in __copy_user_page().Paul Mundt
SH-3 comes up with the PAGE_SIZE on a misaligned boundary: arch/sh/mm/copy_page.S: Assembler messages: arch/sh/mm/copy_page.S:132: Warning: misaligned data fix it up with explicit alignment. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix up various compile warnings for SE boards.Paul Mundt
- setup-sh7750.c only defines the sh7751_ipr_map when building with SH7751 support. - 7722 Solution Engine was missing a mach-type entry, causing the macro in cf-enabler to be undefined. - arch/sh/mm/init.c needs linux/pagemap.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Wire up signalfd/timerfd/eventfd syscalls.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: revert addition of page fault notifiersChristoph Hellwig
Just at the time you added them on sh we're removing them from other architectures. As there's no user yet this patch just removes them completely. Once you actually have a kprobes patch it should follow the direct call to kprobes_fault_handler model that powerpc, s390 and sparc64 employ in 2.6.22-rc1 and that I'm updating other architectures to. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21spelling fixes: arch/sh/Simon Arlott
Spelling fixes in arch/sh/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-19all-archs: consolidate .data section definition in asm-genericSam Ravnborg
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19all-archs: consolidate .text section definition in asm-genericSam Ravnborg
Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-14sh: landisk: rtc-rs5c313 support.kogiidena
Add the rs5c313 platform device to the landisk setup code. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Kill off pmb slab cache destructor.Paul Mundt
This is the last remaining slab destructor in the kernel, which we kill off and move the resultant list tracking logic up to the pmb_alloc()/pmb_free() paths. As Christoph Lameter pointed out, it's potentially unsafe to be taking the list lock in the destructor anyways, so this is also more fundamentally correct. With this in place, we're all set for killing off slab destructors from the kernel entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Fix up psw build rules for r7780rp.Paul Mundt
When reordering the Makefile rules, the psw support was being clobbered. Fix it up so it's linked in again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh: Shut up compiler warnings in __do_page_fault().Paul Mundt
GCC doesn't seem to be able to figure this one out for itself, so just shut it up.. CC arch/sh/mm/fault.o arch/sh/mm/fault.c: In function '__do_page_fault': arch/sh/mm/fault.c:288: warning: 'ptl' may be used uninitialized in this function Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix stacktrace simplification fallout. sh: SH7760 DMABRG support. sh: clockevent/clocksource/hrtimers/nohz TMU support. sh: Truncate MAX_ACTIVE_REGIONS for the common case. rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq(). sh: Convert to common die chain. sh: Wire up utimensat syscall. sh: landisk mv_nr_irqs definition. sh: Fixup ndelay() xloops calculation for alternate HZ. sh: Add 32-bit opcode feature CPU flag. sh: Fix PC adjustments for varying opcode length. sh: Support for SH-2A 32-bit opcodes. sh: Kill off redundant __div64_32 symbol export. sh: Share exception vector table for SH-3/4. sh: Always define TRAPA_BUG_OPCODE. sh: __GFP_REPEAT for pte allocations, too. rtc: rtc-sh: Fix up dev_dbg() warnings. sh: generic quicklist support.
2007-05-09sh: Fix stacktrace simplification fallout.Paul Mundt
When the stacktrace simplification changes went in the function definition on SH got skipped, fix it up so things build again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: SH7760 DMABRG support.Manuel Lauss
The DMABRG is a special DMA unit within the SH7760 which does data transfers from main memory to Audio units and USB shared memory. It has 3 IRQ lines which generate 10 events, which have to be masked unmasked and acked in a single 32bit register. It works independently from the tradition SH DMAC, but blocks usage of DMAC channel 0. This patch adds 2 functions to associate callbacks with DMABRG events and initialization. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: clockevent/clocksource/hrtimers/nohz TMU support.Paul Mundt
This adds basic support for clockevents and clocksources, presently only implemented for TMU-based systems (which are the majority of SH-3 and SH-4 systems). The old NO_IDLE_HZ implementation is also dropped completely, the only users of this were on TMU-based systems anyways. More work needs to be done to generalize the TMU handling, in that the current implementation is rather tied to the notion of TMU0 and TMU1 utilization. Additionally, as more SH timers switch over to this scheme, we'll be able to gut most of the remaining system timer infrastructure that existed before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 09:47:37 +0000