aboutsummaryrefslogtreecommitdiff
path: root/arch/um/include
AgeCommit message (Collapse)Author
2007-05-07uml: fix prototypesPaolo 'Blaisorblade' Giarrusso
Declare strlcpy and strlcat more correctly. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: more page fault path trimmingJeff Dike
More trimming of the page fault path. Permissions are passed around in a single int rather than one bit per int. The permission values are copied from libc so that they can be passed to mmap and mprotect without any further conversion. The register sets used by do_syscall_stub and copy_context_skas0 are initialized once, at boot time, rather than once per call. wait_stub_done checks whether it is getting the signals it expects by comparing the wait status to a mask containing bits for the signals of interest rather than comparing individually to the signal numbers. It also has one check for a wait failure instead of two. The caller is expected to do the initial continue of the stub. This gets rid of an argument and some logic. The fname argument is gone, as that can be had from a stack trace. user_signal() is collapsed into userspace() as it is basically one or two lines of code afterwards. The physical memory remapping stuff is gone, as it is unused. flush_tlb_page is inlined. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: speed page fault pathJeff Dike
Give the page fault code a specialized path. There is only one page to look at, so there's no point in going into the general page table walking code. There's only going to be one host operation, so there are no opportunities for merging. So, we go straight to the pte we want, figure out what needs doing, and do it. While I was in here, I fixed the wart where the address passed to unmap was a void *, but an unsigned long to map and protect. This gives me just under 10% on a kernel build. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: rename os_{read_write}_file_k back to os_{read_write}_fileJeff Dike
Rename os_{read_write}_file_k back to os_{read_write}_file, delete the originals and their bogus infrastructure, and fix all the callers. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: dump core on panicJeff Dike
Dump core after a panic. This will provide better debugging information than is currently available. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: start fixing os_read_file and os_write_fileJeff Dike
This patch starts the removal of a very old, very broken piece of code. This stems from the problem of passing a userspace buffer into read() or write() on the host. If that buffer had not yet been faulted in, read and write will return -EFAULT. To avoid this problem, the solution was to fault the buffer in before the system call by touching the pages that hold the buffer by doing a copy-user of a byte to each page. This is obviously bogus, but it does usually work, in tt mode, since the kernel and process are in the same address space and userspace addresses can be accessed directly in the kernel. In skas mode, where the kernel and process are in separate address spaces, it is completely bogus because the userspace address, which is invalid in the kernel, is passed into the system call instead of the corresponding physical address, which would be valid. Here, it appears that this code, on every host read() or write(), tries to fault in a random process page. This doesn't seem to cause any correctness problems, but there is a performance impact. This patch, and the ones following, result in a 10-15% performance gain on a kernel build. This code can't be immediately tossed out because when it is, you can't log in. Apparently, there is some code in the console driver which depends on this somehow. However, we can start removing it by switching the code which does I/O using kernel addresses to using plain read() and write(). This patch introduces os_read_file_k and os_write_file_k for use with kernel buffers and converts all call locations which use obvious kernel buffers to use them. These include I/O using buffers which are local variables which are on the stack or kmalloc-ed. Later patches will handle the less obvious cases, followed by a mass conversion back to the original interface. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: kernel segfaults should dump proper registersJeff Dike
If there's a segfault inside the kernel, we want a dump of the registers at the point of the segfault, not the registers at the point of calling panic or the last userspace registers. sig_handler_common_skas now uses a static register set in the case of a SIGSEGV to avoid messing up the process registers if the segfault turns out to be non-fatal. The architecture sigcontext-to-pt_regs copying code was repurposed to copy data out of the SEGV stack frame. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: tidy fault codeJeff Dike
Tidying in preparation for the segfault register dumping patch which follows. void * pointers are changed to union uml_pt_regs *. This makes the types match reality, except in arch_fixup, which is changed to operate on a union uml_pt_regs. This fixes a bug in the call from segv_handler, which passes a union uml_pt_regs, to segv, which expects to pass a struct sigcontext to arch_fixup. Whitespace and other style fixes. There's also a errno printk fix. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: remove page_size()Jeff Dike
userspace code used to have to call the kernelspace function page_size() in order to determine the value of the kernel's PAGE_SIZE. Since this is now available directly from kern_constants.h as UM_KERN_PAGE_SIZE, page_size() can be deleted and calls changed to use the constant. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: tidy process.cJeff Dike
Clean up arch/um/kernel/process.c: - lots of return(x); -> return x; conversions - a number of the small functions are either unused, in which case they are gone, along any declarations in a header, or could be made static. - current_pid is ifdefed on CONFIG_MODE_TT and its declaration is ifdefed on both CONFIG_MODE_TT and UML_CONFIG_MODE_TT because we don't know whether it's being used in a userspace or kernel file. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: Replace one-element array with zero-element arrayPaolo 'Blaisorblade' Giarrusso
To look at users I did: $ find arch/um/ include/asm-um -name '*.[ch]'|xargs grep -r 'net_kern\.h' +-l|xargs grep '\<user\>' Most users just cast user to the appropriate pointer, the remaining ones are fixed here. In net_kern.c, I'm almost sure that save trick is not needed anymore, but I've not verified it. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: remove user_util.hJeff Dike
user_util.h isn't needed any more, so delete it and remove all includes of it. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: move remaining useful contents of user_util.hJeff Dike
Rescue the useful contents of the soon-to-be-gone user-util.h. pty.c now gets ptsname from stdlib.h like it should have always done. CATCH_EINTR is now in os.h, although perhaps all usage should be under os-Linux at some point. get_pty is also in os.h. This patch restores the old definition of ARRAY_SIZE in user.h. This file is included only in userspace files, so there will be no conflict with the kernel's new ARRAY_SIZE. The copy of the kernel's ARRAY_SIZE and associated infrastructure is now gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: create as-layout.hJeff Dike
This patch moves all the the symbols defined in um_arch.c, which are mostly boundaries between different parts of the UML kernel address space, to a new header, as-layout.h. There are also a few things here which aren't really related to address space layout, but which don't really have a better place to go. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: create arch.hJeff Dike
This patch moves the declarations of the architecture hooks from user_util.h to a new header, arch.c, and adds the necessary includes to files which need those declarations. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: move SIGIO testing to sigio.cJeff Dike
This patch narrows the sigio interface. The boot-time SIGIO testing used to be in start_up.c, which meant that pty_output_sigio and pty_close_sigio needed to be global. By moving that code here, those can become static and the declarations moved from user_util.h. os_check_bugs is also here because it only does the SIGIO checking. If it does more, it'll probably move back to start_up.c. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07ARRAY_SIZE: check for typeRusty Russell
We can use a gcc extension to ensure that ARRAY_SIZE() is handed an array, not a pointer. This is especially important when code is changed from a fixed array to a pointer. I assume the Intel compiler doesn't support __builtin_types_compatible_p. [jdike@addtoit.com: uml: update UML definition of ARRAY_SIZE] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: network interface hotplug error handlingJeff Dike
This fixes a number of problems associated with network interface hotplug. The userspace initialization function can fail in some cases, but the failure was never passed back to eth_configure, which proceeded with the configuration. This results in a zombie device that is present, but can't work. This is fixed by allowing the initialization routines to return an error, which is checked, and the configuration aborted on failure. eth_configure failed to check for many failures. Even when it did check, it didn't undo whatever initializations has already happened, so a present, but partially initialized and non-working device could result. It now checks everything that can fail, and bails out, undoing whatever had been done. The return value of eth_configure was always ignored, so it is now just void. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: host_info tidyingJeff Dike
Move the host_info string from util.c to um_arch.c, where it is actually initialized and used. Also document its lack of locking. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07uml: delete unused codeJeff Dike
Get rid of a bunch of unused stuff - cpu_feature had no users linux_prog is little-used, so its declaration is moved to the user for easy deletion when the whole file goes away a long-unused debugging aid in helper.c is gone Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29[PATCH] uml: fix compilation problemsJeff Dike
Fix a few miscellaneous compilation problems - an assignment with mismatched types in ldt.c a missing include in mconsole.h which needs a definition of uml_pt_regs I missed removing an include of user_util.h in hostfs Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27[PATCH] uml: use correct register file size everywhereJeff Dike
This patch uses MAX_REG_NR consistently to refer to the register file size. FRAME_SIZE isn't sufficient because on x86_64, it is smaller than the ptrace register file size. MAX_REG_NR was introduced as a consistent way to get the number of registers, but wasn't used everywhere it should be. When this causes a problem, it makes PTRACE_SETREGS fail on x86_64 because of a corrupted segment register value in the known-good register file. The patch also adds a register dump at that point in case there are any future problems here. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08[PATCH] um: remove dead code about os_usr1_signal() and os_usr1_process()Paolo 'Blaisorblade' Giarrusso
os_usr1_signal() is totally unused, os_usr1_process() is used only by TT mode. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Dynamic kernel command-line: fixupsAlon Bar-Lev
Remove in-source externs, linux/init.h is included in all cases. This is a fixups for "Dynamic kernel command-line" patch. It also includes some uml __init fixups so that we can __initdata also its command_line. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Dynamic kernel command-line: umAlon Bar-Lev
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: x86_64 thread fixesJeff Dike
x86_64 needs some TLS fixes. What was missing was remembering the child thread id during clone and stuffing it into the child during each context switch. The %fs value is stored separately in the thread structure since the host controls what effect it has on the actual register file. The host also needs to store it in its own thread struct, so we need the value kept outside the register file. arch_prctl_skas was fixed to call PTRACE_ARCH_PRCTL appropriately. There is some saving and restoring of registers in the ARCH_SET_* cases so that the correct set of registers are changed on the host and restored to the process when it runs again. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: umid tidyingJeff Dike
Add an error message when two umids are put on the command line. umid.h is kind of pointless since it only declares one thing, and that is already declared in os.h. Commented the lack of locking of some data in os-Linux/umid.h. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: SIGIO formatting fixesJeff Dike
Fix formatting in the sigio code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: libc-dependent code should call libc directlyJeff Dike
We shouldn't be using the os wrappers from os code - we can use libc directly. This patch replaces wrapper calls with libc calls. It turns out that os_sigio_async had only one caller, which was in startup.c, so that function is moved there and its name changed. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: locking comments in memory and tempfile codeJeff Dike
Locking comments and emacs comment removal in the low-level memory and temp file code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: make signal handlers staticJeff Dike
A bunch of the signal handlers can be made static. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: remove unused variable and functionJeff Dike
syscall_index and next_syscall_index turn out not to be used. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: fix previous console lockingJeff Dike
Eliminate the open_mutex after complaints from Blaisorblade. It turns out that the tty count provides the information needed to tell whether we are the first opener or last closer. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: console locking commentary and code cleanupJeff Dike
Remove the last vestiges of devfs from console registration. Change the name of the function, plus remove a couple of unused fields from the line_driver structure. struct lines is no longer needed, all traces of it are gone. The only way that I can see to mark a structure as being almost-const is to individually const the fields. This is the case for the line_driver structure, which has only one modifiable field - a list_head in a sub-structure. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: chan_user.h formatting fixesJeff Dike
Whitespace fixes and emacs comment removal. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: mostly const a structureJeff Dike
The chan_opts structure is mostly const, and needs no locking. Comment the lack of locking on the one field that can change. Make all the other fields const. It turned out that console_open_chan didn't use its chan_opts argument, so that is deleted from the function and its callers. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: network driver whitespace and style fixesJeff Dike
Some whitespace and coding style cleanups in the network driver code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: add locking to network transport registrationJeff Dike
The registration of host network transports needed some locking. The transport list itself is locked, but calls to the registration routines are not. This is compensated for by checking that a transport structure is not yet on any list. I also took the opportunity to const all fields in the transport structure except the list, which obviously can be modified. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: console whitespace and comment tidyingJeff Dike
Some comment and whitespace cleanups in the console and mconsole code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: return hotplug errors to hostJeff Dike
I noticed that errors happening while hotplugging devices from the host were never returned back to the mconsole client. In some cases, success was returned instead of even an information-free error. This patch cleans that up by having the low-level configuration code pass back an error string along with an error code. At the top level, which knows whether it is early boot time or responding to an mconsole request, the string is printk'd or returned to the mconsole client. There are also whitespace and trivial code cleanups in the surrounding code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] uml: console locking fixesJeff Dike
Clean up the console driver locking. There are various problems here, including sleeping under a spinlock and spinlock recursion, some of which are fixed here. This patch deals with the locking involved with opens and closes. The problem is that an mconsole request to change a console's configuration can race with an open. Changing a configuration should only be done when a console isn't opened. Also, an open must be looking at a stable configuration. In addition, a get configuration request must observe the same locking since it must also see a stable configuration. With the old locking, it was possible for this to hang indefinitely in some cases because open would block for a long time waiting for a connection from the host while holding the lock needed by the mconsole request. As explained in the long comment, this is fixed by adding a spinlock for the use count and configuration and a mutex for the actual open and close. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-13[PATCH] uml: fix net_kern workqueue abusePeter Zijlstra
Fix up the work on stack and exit scope trouble by placing the work_struct in the uml_net_private data. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] uml: size register files correctlyJeff Dike
We were using the wrong symbol to size register files. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] uml: include asm/page.h in order to get PAGE_SHIFTJeff Dike
Include the proper header to get a definition of PAGE_SHIFT. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] uml: workqueue build fixAndrew Morton
arch/um/drivers/chan_kern.c:643: error: conflicting types for 'chan_interrupt' arch/um/include/chan_kern.h:31: error: previous declaration of 'chan_interrupt' Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-02[NET]: UML checksum annotations and cleanups.Al Viro
* sanitize prototypes, annotate * kill csum_partial_copy_fromuser * kill shift-by-16 in checksum calculations * ntohs->shift in checksum calculations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-25[PATCH] uml: make execvp safe for our usagePaolo 'Blaisorblade' Giarrusso
Reimplement execvp for our purposes - after we call fork() it is fundamentally unsafe to use the kernel allocator - current is not valid there. So we simply pass to our modified execvp() a preallocated buffer. This fixes a real bug and works very well in testing (I've seen indirectly warning messages from the forked thread - they went on the pipe connected to its stdout and where read as a number by UML, when calling read_output(). I verified the obtained number corresponded to "BUG:"). The added use of __cant_sleep() is not a new bug since __cant_sleep() is already used in the same function - passing an atomicity parameter would be better but it would require huge change, stating that this function must not be called in atomic context and can sleep is a better idea (will make sure of this gradually). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] uml: fix I/O hangJeff Dike
Fix a UML hang in which everything would just stop until some I/O happened - a ping, someone whacking the keyboard - at which point everything would start up again as though nothing had happened. The cause was gcc reordering some code which absolutely needed to be executed in the order in the source. When unblock_signals switches signals from off to on, it needs to see if any interrupts had happened in the critical section. The interrupt handlers check signals_enabled - if it is zero, then the handler adds a bit to the "pending" bitmask and returns. unblock_signals checks this mask to see if any signals need to be delivered. The crucial part is this: signals_enabled = 1; save_pending = pending; if(save_pending == 0) return; pending = 0; In order to avoid an interrupt arriving between reading pending and setting it to zero, in which case, the record of the interrupt would be erased, signals are enabled. What happened was that gcc reordered this so that 'save_pending = pending' came before 'signals_enabled = 1', creating a one-instruction window within which an interrupt could arrive, set its bit in pending, and have it be immediately erased. When the I/O workload is purely disk-based, the loss of a block device interrupt stops the entire I/O system because the next block request will wait for the current one to finish. Thus the system hangs until something else causes some I/O to arrive, such as a network packet or console input. The fix to this particular problem is a memory barrier between enabling signals and reading the pending signal mask. An xchg would also probably work. Looking over this code for similar problems led me to do a few more things: - make signals_enabled and pending volatile so that they don't get cached in registers - add an mb() to the return paths of block_signals and unblock_signals so that the modification of signals_enabled doesn't get shuffled into the caller in the event that these are inlined in the future. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-31[PATCH] uml ubd driver: various little changesPaolo 'Blaisorblade' Giarrusso
Fix a small memory leak in ubd_config, and clearify the confusion which lead to it. Then, some little changes not affecting operations - * move init functions together, * add a comment about a potential problem in case of some evolution in the block layer, * mark all initcalls as static __init functions * mark an used once little function as inline * document that mconsole methods are all called in process context (was triggered when checking ubd mconsole methods). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>