aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2008-01-30i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremapHuang, Ying
This patch makes it possible for bt_ioremap() to be used before paging_init(), via providing an early implementation of set_fixmap() that can be used before paging_init(). This way boot_ioremap() can be replaced by bt_ioremap(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix recursion in arch/x86/kernel/cpu/mcheck/mce_amd_64.cYinghai Lu
remove the recursion from this function. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add mm parameter to paravirt_alloc_pdJeremy Fitzhardinge
Add mm to paravirt_alloc_pd, partly to make it consistent with paravirt_alloc_pt, and because later changes will make use of it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change aper valid checking sequenceYinghai Lu
old sequence: size ==> >4G ==> point to RAM changed to: >4G ==> point to RAM ==> size some bios even leave aper to unclear, so check size at last. To avoid reporting: Node 0: Aperture @ 4a42000000 size 32 MB Aperture too small (32 MB) with this change we will get: Node 0: Aperture @ 4a42000000 size 32 MB Aperture beyond 4G. Ignoring. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: force enable HPET on (some?) ICH9 boardsAlistair John Strachan
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS option for enabling the HPET. The same ICH workaround used for 6,7,8 can be applied to 9. Here I enable the only PCI id that was visible on my system. I have confirmed the HPETs work both from userspace and as a clocksource for the running kernel (2.6.24 here) after applying this patch. Force enabled HPET at base address 0xfed00000 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: not set boot cpu in cpu_online_map in smp_prepare_boot_cpu()Yinghai Lu
in init/main.c boot_cpu_init() does that before. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: not set boot cpu in cpu_present_map againYinghai Lu
in init/main.c boot_cpu_init() already does that before setup_arch Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in setup_64.cSam Ravnborg
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x7a3): Section mismatch: reference to .init.text:amd_detect_cmp in 'init_amd' The function amd_detect_cmp were annotated __init and was only used from init_amd() which are annotated __cpuinit. Annotate amd_detect_cmp() with _cpuinit to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in topology.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu' Annotating exported symbols are wrong. Previously the warning were hidden by avoiding the export in the non HOTPLUG_CPU case but the improved checks in modpost caught it anyway. Fix it by removing the __cpuinit annotation and rearrange the code a bit to save one ifdef/endif pair. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in early-quirks.cSam Ravnborg
Fix following warnings: WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data: Warning was caused by access to the __initdata annotated variable from the non-annotated static function check_dev_quirk(). check_dev_quirk() were only used from a function annotated __init so add __init annotation to check_dev_quirk() to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in acpi/boot.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic' The exported function acpi_unmap_lsapic() references the variable num_processors that is annotated __cpuinitdata. Remove the annotation of num_processors as we never know when an exported function are called. And drop the needless initialsation to 0. Warning was seen on 64 bit but similar pattern were seen in 32 bit - so fix it up there too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in process_*.cSam Ravnborg
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable' [Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too] mwait_usable() were only used by a function annotated __cpuinit so annotate mwait_usable() with __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in mcheck/mce_amd_64.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback' threshold_cpu_callback() is only used by threshold_cpu_notifier. threshold_cpu_notifier is only used for cpu hot plug as it is registered using register_hotcpu_notifier(). Mark them both __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in mcheck/mce_64.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback' mce_cpu_callback() is only used by mce_cpu_notofier. The notifier is only used for hotplugable cpu's as it is registered using register_hotcpu_notifier(), Annotate them both __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add the RDC machine specific reboot fixupFlorian Fainelli
The RDC R-321x SoC needs a reboot fixup which uses its internal hardware watchdog set to reset the CPU on next tick. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: GEODE: update GPIO API to support setting multiple GPIOs at onceAndres Salomon
The existing Geode GPIO API only allows for updating one GPIO at once. There are instances where users want to update multiple GPIOs at once. With the current API, they are given two choices; either ignore the GPIO API: outl(0xc000, gpio_base + GPIO_OUTPUT_VAL); outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE); Alternatively, call each GPIO update separately: geode_gpio_set(14, GPIO_OUTPUT_VAL); geode_gpio_set(15, GPIO_OUTPUT_VAL); geode_gpio_set(14, GPIO_OUTPUT_ENABLE); geode_gpio_set(15, GPIO_OUTPUT_ENABLE); Neither are desirable. This patch changes the GPIO API to allow for setting of multiple GPIOs at once; rather than being passed an integer, we pass a bitmask and provide a translation function. The above code would now look like this: geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL); geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE); Since there are no upstream users of the GPIO API yet (afaik), best to change this now. This also adds a bit of sanity checking; it is no longer possible to use a GPIO above 28. Note the semantics of geode_gpio_isset() have changed: geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...) will only return true iff both GPIOs are set. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: fix cpu MHz reporting for AMD family 0x11Andreas Herrmann3
Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is disabled. Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding whether cpu_khz needs calibration. The additional check for CPU family is not needed and prevents calibration for future CPUs. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: improve MTRR trimming messagesIngo Molnar
improve the MTTR trimming messages and also trigger a WARN_ON() so that kerneloops.org can pick it up and categorize it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timersWilly Tarreau
The new "mfgptfix" boot command line option may be usd to fix MFGPT timers on AMD Geode platforms when the BIOS has incorrectly applied a workaround. TinyBIOS version 0.98 is known to be affected, 0.99 fixes the problem by letting the user disable the workaround. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove struct cpu_model_infoHiroshi Shimamoto
No one uses struct cpu_model_info on x86_64 now. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use KSYM_NAME_LENCyrill Gorcunov
Use KSYM_NAME_LEN instead of numeric value Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: should use array directly for early_ptrYinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove duplicated line aboutYinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: trim memory by updating e820Yinghai Lu
when MTRRs are not covering the whole e820 table, we need to trim the RAM and need to update e820. reuse some code on 64-bit as well. here need to add early_get_cap and use it in early_cpu_detect, and move mtrr_bp_init early. The code successfully trimmed the memory map on Justin's system: from: [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) to: [ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable) [ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved) According to Justin it makes quite a difference: | When I boot the box without any trimming it acts like a 286 or 386, | takes about 10 minutes to boot (using raptor disks). Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: constify function pointer tablesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30rtc: use the IRQ callback interface in (old) RTC driverBernhard Walle
the previous patch in the old RTC driver. It also removes the direct rtc_interrupt() call from arch/x86/kernel/hpetc.c so that there's finally no (code) dependency to CONFIG_RTC in arch/x86/kernel/hpet.c. Because of this, it's possible to compile the drivers/char/rtc.ko driver as module and still use the HPET emulation functionality. This is also expressed in Kconfig. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modulesBernhard Walle
enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix Section mismatch: reference to .init.text:lguest_entrySam Ravnborg
fix: > WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start') Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: always run the full set of paging state.Ian Campbell
I am preparing to convert the boot time page table to the kernels native format. To achieve that I need to enable PAE. Enabling PSE and the no execute bit would not hurt. So this patch modifies the boot cpu path to execute all of the kernels enable code if and only if we have the proper bits set in mmu_cr4_features. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: remove unnecessary use of %ebx as the boot cpu flagIan Campbell
Currently in head_32.S there are two ways we test to see if we are the boot cpu. By looking at %ebx and by looking at the static variable ready. When changing things around I have found that it gets tricky to preserve %ebx. So this patch just switches head.S over to the more reliable test of always using ready. Hopefully later we can kill these tests entirely. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make printk_address available on X86_32Harvey Harrison
Small fomatting fixes to 64-bit as well, trailing whitespace and extra semicolon, also move the ifdefs for CONFIG_KALLSYMS into the function itself. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: reboot: remove inb_p usageAlan Cox
We are driving a motherboard port so use a 2uS explicit delay at this point. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: export __supported_pte_maskGlauber de Oliveira Costa
export __supported_pte_mask variable as GPL symbol. lguest is a user of it. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: export check_tsc_unstableGlauber de Oliveira Costa
Exporrt check_tsc_unstable function as GPL symbol. lguest is a user of it. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix up alternatives with lockdep enabledIngo Molnar
An older binutils bug caused us to not fix up alternatives. This problem involved mutex.c but we dont do lockdep section tricks there anymore, so this workaround is moot. Keep the printk nevertheless, just in case ... We can remove that later on. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add warning to check_tsc_warp()Ingo Molnar
add warning to check_tsc_warp() - if get_cycles() does not progress. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: check_tsc_warp() slowness fixIngo Molnar
100 million max # of loops is a bit too much - reduce it to 10 million. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove unneded castsJan Engelhardt
x86: remove unneeded casts Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change bios_cpu_apicid to percpu data variable fixuptravis@sgi.com
Change static bios_cpu_apicid array to a per_cpu data variable. This includes using a static array used during initialization similar to the way x86_cpu_to_apicid[] is handled. There is one early use of bios_cpu_apicid in apic_is_clustered_box(). The other reference in cpu_present_to_apicid() is called after smp_set_apicids() has setup the percpu version of bios_cpu_apicid. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change NR_CPUS arrays in numa_64 fixuptravis@sgi.com
Change the following static arrays sized by NR_CPUS to per_cpu data variables: char cpu_to_node_map[NR_CPUS]; fixup: - Split cpu_to_node function into "early" and "late" versions so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and the cpu_to_node inline function is more streamlined. - This also involves setting up the percpu maps as early as possible. - Fix X86_32 NUMA build errors that previous version of this patch caused. V2->V3: - add early_cpu_to_node function to keep cpu_to_node efficient - move and rename smp_set_apicids() to setup_percpu_maps() - call setup_percpu_maps() as early as possible V1->V2: - Removed extraneous casts - Fix !NUMA builds with '#ifdef CONFIG_NUMA" Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add generic clearcpuid=... optionAndi Kleen
Add a generic option to clear any cpuid bit. I added it because it was very easy to add with the new generic cpuid disable bitmap and perhaps it will be useful in the future. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add noclflush optionAndi Kleen
To disable CLFLUSH usage, especially in change_page_attr(). Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: convert TSC disabling to generic cpuid disable bitmapAndi Kleen
Fix from: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't disable RDTSC in userland for 32bit notscAndi Kleen
Modern 32bit userland doesn't even boot when the TSC is disabled because ld.so tends to contain RDTSCs. So make notsc only effective for the kernel, similar to 64bit. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: convert some existing cpuid disable options to new generic bitmapAndi Kleen
This convers nofxsr, mem=nopentium and nosep to use the new generic cpuid disable bitmap instead of using own variables. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add framework to disable CPUID bits on the command lineAndi Kleen
There are already various options to disable specific cpuid bits on the command line. They all use their own variable. Add a generic mask to make this easier in the future. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fill in missing pv_mmu_ops entries for PAGETABLE_LEVELS >= 3Eduardo Habkost
This finally makes paravirt-ops able to compile and boot under x86_64. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't set pagetable_setup_{start,done} hooks on 64-bitEduardo Habkost
paravirt_pagetable_setup_{start,done}() are not used (yet) under x86_64, and native_pagetable_setup_{start,done}() don't exist on x86_64. So they don't need to be set. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: provide __parainstructions sectionGlauber de Oliveira Costa
This patch adds the __parainstructions section to vmlinux.lds.S. It's needed for the patching system. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add asm_offset PARAVIRT constantsGlauber de Oliveira Costa
This patch adds the constant PARAVIRT needs in asm_offsets_64.c Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 19:09:30 +0000