| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
INTn will be re-executed after migration. If we wanted to migrate
pending software interrupt we would need to migrate interrupt type
and instruction length too, but we do not have all required info on
SVM, so SVM->VMX migration would need to re-execute INTn anyway. To
make it simple never migrate pending soft interrupt.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently they are not requested if there is pending exception.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Re-inject event instead. This is what Intel suggest. Also use correct
instruction length when re-injecting soft fault/interrupt.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Only one interrupt vector can be injected from userspace irqchip at
any given time so no need to store it in a bitmap. Put it into interrupt
queue directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
event.
The exception will immediately close the interrupt window.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Verify the cr3 address stored in vcpu->arch.cr3 points to an existant
memslot. If not, inject a triple fault.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvm_handle_hva, called by MMU notifiers, manipulates mmu data only with
the protection of mmu_lock.
Update kvm_mmu_change_mmu_pages callers to take mmu_lock, thus protecting
against kvm_handle_hva.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We currently unblock shadow interrupt state when we skip an instruction,
but failing to do so when we actually emulate one. This blocks interrupts
in key instruction blocks, in particular sti; hlt; sequences
If the instruction emulated is an sti, we have to block shadow interrupts.
The same goes for mov ss. pop ss also needs it, but we don't currently
emulate it.
Without this patch, I cannot boot gpxe option roms at vmx machines.
This is described at https://bugzilla.redhat.com/show_bug.cgi?id=494469
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch replaces drop_interrupt_shadow with the more
general set_interrupt_shadow, that can either drop or raise
it, depending on its parameter. It also adds ->get_interrupt_shadow()
for future use.
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.
This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.
Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.
This allows kvm_vcpu_kick to called with interrupts disabled.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
MTRR, PAT, MCE, and MCA are all supported (to some extent) but not reported.
Vista requires these features, so if userspace relies on kernel cpuid
reporting, it loses support for Vista.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The stats entry request_nmi is no longer used as the related user space
interface was dropped. So clean it up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Shadow_mt_mask is out of date, now it have only been used as a flag to indicate
if TDP enabled. Get rid of it and use tdp_enabled instead.
Also put memory type logical in kvm_x86_ops->get_mt_mask().
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This moves the get_cpu() call down to be called after we wake up the
waiters. Therefore the waitqueue locks can safely be rt mutex.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
It just returns pending IRQ vector from the queue for VMX/SVM.
Get IRQ directly from the queue before migration and put it back
after.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Re-put pending IRQ vector into interrupt_bitmap before migration.
Otherwise it will be lost if migration happens in the wrong time.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
It is the same as inject_pending_irq() for VMX/SVM now.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
It always return false for VMX/SVM now.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
interrupt_window_open directly
kvm_arch_interrupt_allowed() also checks IF so drop the check.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Use the same callback to inject irq/nmi events no matter what irqchip is
in use. Only from VMX for now.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
At the vector level, kernel and userspace irqchip are fairly similar.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Matt T. Yourst notes that kvm_arch_vcpu_ioctl_set_sregs lacks validity
checking for the new cr3 value:
"Userspace callers of KVM_SET_SREGS can pass a bogus value of cr3 to
the kernel. This will trigger a NULL pointer access in gfn_to_rmap()
when userspace next tries to call KVM_RUN on the affected VCPU and kvm
attempts to activate the new non-existent page table root.
This happens since kvm only validates that cr3 points to a valid guest
physical memory page when code *inside* the guest sets cr3. However, kvm
currently trusts the userspace caller (e.g. QEMU) on the host machine to
always supply a valid page table root, rather than properly validating
it along with the rest of the reloaded guest state."
http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2687641&group_id=180599
Check for a valid cr3 address in kvm_arch_vcpu_ioctl_set_sregs, triple
fault in case of failure.
Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Suggested by Ingo Molnar.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
In the new mode instruction is decoded, but not executed. The EIP
is moved to point after the instruction.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Complexity to fix it not worthwhile the gains, as discussed
in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
There is no need to skip instruction if the reason for a task switch
is a task gate in IDT and access to it is caused by an external even.
The problem is currently solved only for VMX since there is no reliable
way to skip an instruction in SVM. We should emulate it instead.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Back link is written to a wrong TSS now.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Also remove bit 5-6 from rsvd_bits_mask per latest SDM.
Signed-off-by: Eddie Dong <Eddie.Dong@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Remove pointless conditional before kfree().
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
A pte that is shadowed when the guest EFER.NXE=1 is not valid when
EFER.NXE=0; if bit 63 is set, the pte should cause a fault, and since the
shadow EFER always has NX enabled, this won't happen.
Fix by using a different shadow page table for different EFER.NXE bits. This
allows vcpus to run correctly with different values of EFER.NXE, and for
transitions on this bit to be handled correctly without requiring a full
flush.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Detect, indicate, and propagate page faults where reserved bits are set.
Take care to handle the different paging modes, each of which has different
sets of reserved bits.
[avi: fix pte reserved bits for efer.nxe=0]
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking
if interrupt window is actually opened.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently timer events are processed before entering guest mode. Move it
to main vcpu event loop since timer events should be processed even while
vcpu is halted. Timer may cause interrupt/nmi to be injected and only then
vcpu will be unhalted.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We ignore writes to the performance counters and performance event
selector registers already. Kaspersky antivirus reads the eventsel
MSR causing it to crash with the current behaviour.
Return 0 as data when the eventsel registers are read to stop the
crash.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
After discussion with Marcelo, we decided to rework device assignment framework
together. The old problems are kernel logic is unnecessary complex. So Marcelo
suggest to split it into a more elegant way:
1. Split host IRQ assign and guest IRQ assign. And userspace determine the
combination. Also discard msi2intx parameter, userspace can specific
KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to
enable MSI to INTx convertion.
2. Split assign IRQ and deassign IRQ. Import two new ioctls:
KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ.
This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the
old interface).
[avi: replace homemade bitcount() by hweight_long()]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This issue just appeared in kvm-84 when running on 2.6.28.7 (x86-64)
with PREEMPT enabled.
We're getting syslog warnings like this many (but not all) times qemu
tells KVM to run the VCPU:
BUG: using smp_processor_id() in preemptible [00000000] code:
qemu-system-x86/28938
caller is kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
Pid: 28938, comm: qemu-system-x86 2.6.28.7-mtyrel-64bit
Call Trace:
debug_smp_processor_id+0xf7/0x100
kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
? __wake_up+0x4e/0x70
? wake_futex+0x27/0x40
kvm_vcpu_ioctl+0x2e9/0x5a0 [kvm]
enqueue_hrtimer+0x8a/0x110
_spin_unlock_irqrestore+0x27/0x50
vfs_ioctl+0x31/0xa0
do_vfs_ioctl+0x74/0x480
sys_futex+0xb4/0x140
sys_ioctl+0x99/0xa0
system_call_fastpath+0x16/0x1b
As it turns out, the call trace is messed up due to gcc's inlining, but
I isolated the problem anyway: kvm_write_guest_time() is being used in a
non-thread-safe manner on preemptable kernels.
Basically kvm_write_guest_time()'s body needs to be surrounded by
preempt_disable() and preempt_enable(), since the kernel won't let us
query any per-CPU data (indirectly using smp_processor_id()) without
preemption disabled. The attached patch fixes this issue by disabling
preemption inside kvm_write_guest_time().
[marcelo: surround only __get_cpu_var calls since the warning
is harmless]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The processor is documented to reload the PDPTRs while in PAE mode if any
of the CR4 bits PSE, PGE, or PAE change. Linux relies on this
behaviour when zapping the low mappings of PAE kernels during boot.
The code already handled changes to CR4.PAE; augment it to also notice changes
to PSE and PGE.
This triggered while booting an F11 PAE kernel; the futex initialization code
runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem
ended up uninitialized, killing PI futexes and pulseaudio which uses them.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
NX support is bit 20, not bit 1.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Properly unregister cpufreq notifier on onload if it was registered
during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Not releasing the time_page causes a leak of that page or the compound
page it is situated in.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Impact: Make symbols static.
Fix this sparse warnings:
arch/x86/kvm/mmu.c:992:5: warning: symbol 'mmu_pages_add' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1124:5: warning: symbol 'mmu_pages_next' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1144:6: warning: symbol 'mmu_pages_clear_parents' was not declared. Should it be static?
arch/x86/kvm/x86.c:2037:5: warning: symbol 'kvm_read_guest_virt' was not declared. Should it be static?
arch/x86/kvm/x86.c:2067:5: warning: symbol 'kvm_write_guest_virt' was not declared. Should it be static?
virt/kvm/irq_comm.c:220:5: warning: symbol 'setup_routing_entry' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvmclock currently falls apart on machines without constant tsc.
This patch fixes it. Changes:
* keep tsc frequency in a per-cpu variable.
* handle kvmclock update using a new request flag, thus checking
whenever we need an update each time we enter guest context.
* use a cpufreq notifier to track frequency changes and force
kvmclock updates.
* send ipis to kick cpu out of guest context if needed to make
sure the guest doesn't see stale values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
AMD K10 CPUs implement the FFXSR feature that gets enabled using
EFER. Let's check if the virtual CPU description includes that
CPUID feature bit and allow enabling it then.
This is required for Windows Server 2008 in Hyper-V mode.
v2 adds CPUID capability exposure
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC). This is insufficient for several reasons:
- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
ioapics
This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table. The
routing table is initialized according to the current hardwired mapping.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
