aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm
AgeCommit message (Collapse)Author
2009-03-24KVM: SVM: Add VMEXIT handler and interceptsAlexander Graf
This adds the #VMEXIT intercept, so we return to the level 1 guest when something happens in the level 2 guest that should return to the level 1 guest. v2 implements HIF handling and cleans up exception interception v3 adds support for V_INTR_MASKING_MASK v4 uses the host page hsave v5 removes IOPM merging code v6 moves mmu code out of the atomic section Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add VMRUN handlerAlexander Graf
This patch implements VMRUN. VMRUN enters a virtual CPU and runs that in the same context as the normal guest CPU would run. So basically it is implemented the same way, a normal CPU would do it. We also prepare all intercepts that get OR'ed with the original intercepts, as we do not allow a level 2 guest to be intercepted less than the first level guest. v2 implements the following improvements: - fixes the CPL check - does not allocate iopm when not used - remembers the host's IF in the HIF bit in the hflags v3: - make use of the new permission checking - add support for V_INTR_MASKING_MASK v4: - use host page backed hsave v5: - remove IOPM merging code v6: - save cr4 so PAE l1 guests work v7: - return 0 on vmrun so we check the MSRs too - fix MSR check to use the correct variable Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add VMLOAD and VMSAVE handlersAlexander Graf
This implements the VMLOAD and VMSAVE instructions, that usually surround the VMRUN instructions. Both instructions load / restore the same elements, so we only need to implement them once. v2 fixes CPL checking and replaces memcpy by assignments v3 makes use of the new permission checking Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Implement hsaveAlexander Graf
Implement the hsave MSR, that gives the VCPU a GPA to save the old guest state in. v2 allows userspace to save/restore hsave v4 dummys out the hsave MSR, so we use a host page v6 remembers the guest's hsave and exports the MSR Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Implement GIF, clgi and stgiAlexander Graf
This patch implements the GIF flag and the clgi and stgi instructions that set this flag. Only if the flag is set (default), interrupts can be received by the CPU. To keep the information about that somewhere, this patch adds a new hidden flags vector. that is used to store information that does not go into the vmcb, but is SVM specific. I tried to write some code to make -no-kvm-irqchip work too, but the first level guest won't even boot with that atm, so I ditched it. v2 moves the hflags to x86 generic code v3 makes use of the new permission helper v6 only enables interrupt_window if GIF=1 Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add helper functions for nested SVMAlexander Graf
These are helpers for the nested SVM implementation. - nsvm_printk implements a debug printk variant - nested_svm_do calls a handler that can accesses gpa-based memory v3 makes use of the new permission checker v6 changes: - streamline nsvm_debug() - remove printk(KERN_ERR) - SVME check before CPL check - give GP error code - use new EFER constant Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Move EFER and MSR constants to generic x86 codeAlexander Graf
MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM specific headers. Linux does have nice header files to collect EFER bits and MSR IDs, so IMHO we should put them there. While at it, I also changed the naming scheme to match that of the other defines. (introduced in v6) Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Clean up VINTR settingAlexander Graf
The current VINTR intercept setters don't look clean to me. To make the code easier to read and enable the possibilty to trap on a VINTR set, this uses a helper function to set the VINTR intercept. v2 uses two distinct functions for setting and clearing the bit Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: VMX: Flush volatile msrs before emulating rdmsrAvi Kivity
Some msrs (notable MSR_KERNEL_GS_BASE) are held in the processor registers and need to be flushed to the vcpu struture before they can be read. This fixes cygwin longjmp() failure on Windows x64. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: x86: fix LAPIC pending count calculationMarcelo Tosatti
Simplify LAPIC TMCCT calculation by using hrtimer provided function to query remaining time until expiration. Fixes host hang with nested ESX. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: MMU: Map device MMIO as UC in EPTSheng Yang
Software are not allow to access device MMIO using cacheable memory type, the patch limit MMIO region with UC and WC(guest can select WC using PAT and PCD/PWT). Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: x86: disable kvmclock on non constant TSC hostsMarcelo Tosatti
This is better. Currently, this code path is posing us big troubles, and we won't have a decent patch in time. So, temporarily disable it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: PIT: fix i8254 pending count readMarcelo Tosatti
count_load_time assignment is bogus: its supposed to contain what it means, not the expiration time. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: Fix racy in kvm_free_assigned_irqSheng Yang
In the past, kvm_get_kvm() and kvm_put_kvm() was called in assigned device irq handler and interrupt_work, in order to prevent cancel_work_sync() in kvm_free_assigned_irq got a illegal state when waiting for interrupt_work done. But it's tricky and still got two problems: 1. A bug ignored two conditions that cancel_work_sync() would return true result in a additional kvm_put_kvm(). 2. If interrupt type is MSI, we would got a window between cancel_work_sync() and free_irq(), which interrupt would be injected again... This patch discard the reference count used for irq handler and interrupt_work, and ensure the legal state by moving the free function at the very beginning of kvm_destroy_vm(). And the patch fix the second bug by disable irq before cancel_work_sync(), which may result in nested disable of irq but OK for we are going to free it. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15KVM: Add kvm_arch_sync_events to sync with asynchronize eventsSheng Yang
kvm_arch_sync_events is introduced to quiet down all other events may happen contemporary with VM destroy process, like IRQ handler and work struct for assigned device. For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so the state of KVM here is legal and can provide a environment to quiet down other events. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-03KVM: change KVM to use IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: rename vtd.c to iommu.cJoerg Roedel
Impact: file renamed The code in the vtd.c file can be reused for other IOMMUs as well. So rename it to make it clear that it handle more than VT-d. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-31KVM: MMU: handle large host sptes on invlpg/resyncMarcelo Tosatti
The invlpg and sync walkers lack knowledge of large host sptes, descending to non-existant pagetable level. Stop at directory level in such case. Fixes SMP Windows XP with hugepages. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: Add locking to virtual i8259 interrupt controllerAvi Kivity
While most accesses to the i8259 are with the kvm mutex taken, the call to kvm_pic_read_irq() is not. We can't easily take the kvm mutex there since the function is called with interrupts disabled. Fix by adding a spinlock to the virtual interrupt controller. Since we can't send an IPI under the spinlock (we also take the same spinlock in an irq disabled context), we defer the IPI until the spinlock is released. Similarly, we defer irq ack notifications until after spinlock release to avoid lock recursion. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: Don't treat a global pte as such if cr4.pge is clearedAvi Kivity
The pte.g bit is meaningless if global pages are disabled; deferring mmu page synchronization on these ptes will lead to the guest using stale shadow ptes. Fixes Vista x86 smp bootloader failure. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMIJan Kiszka
There is no point in doing the ready_for_nmi_injection/ request_nmi_window dance with user space. First, we don't do this for in-kernel irqchip anyway, while the code path is the same as for user space irqchip mode. And second, there is nothing to loose if a pending NMI is overwritten by another one (in contrast to IRQs where we have to save the number). Actually, there is even the risk of raising spurious NMIs this way because the reason for the held-back NMI might already be handled while processing the first one. Therefore this patch creates a simplified user space NMI injection interface, exporting it under KVM_CAP_USER_NMI and dropping the old KVM_CAP_NMI capability. And this time we also take care to provide the interface only on archs supporting NMIs via KVM (right now only x86). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchipJan Kiszka
As with the kernel irqchip, don't allow an NMI to stomp over an already injected IRQ; instead wait for the IRQ injection to be completed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: check for present pdptr shadow page in walk_shadowMarcelo Tosatti
walk_shadow assumes the caller verified validity of the pdptr pointer in question, which is not the case for the invlpg handler. Fixes oops during Solaris 10 install. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: Consolidate userspace memory capability reporting into common codeAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: prepopulate the shadow on invlpgMarcelo Tosatti
If the guest executes invlpg, peek into the pagetable and attempt to prepopulate the shadow entry. Also stop dirty fault updates from interfering with the fork detector. 2% improvement on RHEL3/AIM7. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: skip global pgtables on sync due to cr3 switchMarcelo Tosatti
Skip syncing global pages on cr3 switch (but not on cr4/cr0). This is important for Linux 32-bit guests with PAE, where the kmap page is marked as global. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: collapse remote TLB flushes on root syncMarcelo Tosatti
Collapse remote TLB flushes on root sync. kernbench is 2.7% faster on 4-way guest. Improvements have been seen with other loads such as AIM7. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: use page array in unsync walkMarcelo Tosatti
Instead of invoking the handler directly collect pages into an array so the caller can work with it. Simplifies TLB flush collapsing. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Fix handling of VMMCALL instructionAmit Shah
The VMMCALL instruction doesn't get recognised and isn't processed by the emulator. This is seen on an Intel host that tries to execute the VMMCALL instruction after a guest live migrates from an AMD host. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add the emulation of shld and shrd instructionsGuillaume Thouvenin
Add emulation of shld and shrd instructions Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add the assembler code for three operandsGuillaume Thouvenin
Add the assembler code for instruction with three operands and one operand is stored in ECX register Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add a new "implied 1" Src decode typeGuillaume Thouvenin
Add SrcOne operand type when we need to decode an implied '1' like with regular shift instruction Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: add Src2 decode setGuillaume Thouvenin
Instruction like shld has three operands, so we need to add a Src2 decode set. We start with Src2None, Src2CL, and Src2ImmByte, Src2One to support shld/shrd and we will expand it later. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Extend the opcode descriptorGuillaume Thouvenin
Extend the opcode descriptor to 32 bits. This is needed by the introduction of a new Src2 operand type. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: VMX: fix sparse warningHannes Eder
Impact: make global function static arch/x86/kvm/vmx.c:134:3: warning: symbol 'vmx_capability' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: Remove extraneous semicolon after do/whileAvi Kivity
Notices by Guillaume Thouvenin. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: fix popf emulationAvi Kivity
Set operand type and size to get correct writeback behavior. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: fix ret emulationAvi Kivity
'ret' did not set the operand type or size for the destination, so writeback ignored it. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: switch 'pop reg' instruction to emulate_pop()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: allow pop from mmioAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: Extract 'pop' sequence into a functionAvi Kivity
Switch 'pop r/m' instruction to use the new function. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: consolidate emulation of two operand instructionsAvi Kivity
No need to repeat the same assembly block over and over. Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: x86 emulator: reduce duplication in one operand emulation thunksAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: MMU: optimize set_spte for page syncMarcelo Tosatti
The write protect verification in set_spte is unnecessary for page sync. Its guaranteed that, if the unsync spte was writable, the target page does not have a write protected shadow (if it had, the spte would have been write protected under mmu_lock by rmap_write_protect before). Same reasoning applies to mark_page_dirty: the gfn has been marked as dirty via the pagefault path. The cost of hash table and memslot lookups are quite significant if the workload is pagetable write intensive resulting in increased mmu_lock contention. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: VMX: Conditionally request interrupt window after injecting irqAvi Kivity
If we're injecting an interrupt, and another one is pending, request an interrupt window notification so we don't have excess latency on the second interrupt. This shouldn't happen in practice since an EOI will be issued, giving a second chance to request an interrupt window, but... Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: SVM: move svm_hardware_disable() code to asm/virtext.hEduardo Habkost
Create cpu_svm_disable() function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: SVM: move has_svm() code to asm/virtext.hEduardo Habkost
Use a trick to keep the printk()s on has_svm() working as before. gcc will take care of not generating code for the 'msg' stuff when the function is called with a NULL msg argument. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: VMX: extract kvm_cpu_vmxoff() from hardware_disable()Eduardo Habkost
Along with some comments on why it is different from the core cpu_vmxoff() function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: VMX: move cpu_has_kvm_support() to an inline on asm/virtext.hEduardo Habkost
It will be used by core code on kdump and reboot, to disable vmx if needed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: SVM: move svm.h to include/asmEduardo Habkost
svm.h will be used by core code that is independent of KVM, so I am moving it outside the arch/x86/kvm directory. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 19:27:47 +0000