aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/mm
AgeCommit message (Collapse)Author
2008-01-30x86: c_p_a() make it more robust against use of PAT bitsAndi Kleen
Use the page table level instead of the PSE bit to check if the PTE is for a 4K page or not. This makes the code more robust when the PAT bit is changed because the PAT bit on 4K pages is in the same position as the PSE bit. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: c_p_a() fix: reorder TLB / cache flushes to follow Intel recommendationAndi Kleen
Intel recommends to first flush the TLBs and then the caches on caching attribute changes. c_p_a() previously did it the other way round. Reorder that. The procedure is still not fully compliant to the Intel documentation because Intel recommends a all CPU synchronization step between the TLB flushes and the cache flushes. However on all new Intel CPUs this is now meaningless anyways because they support Self-Snoop and can skip the cache flush step anyway. [ mingo@elte.hu: decoupled from clflush and ported it to x86.git ] Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix c_p_a() boot crashAndi Kleen
fix: > hm, i just found a failing 64-bit .config while testing your CPA > patchset: > > [ 1.916541] CPA mapping 4k 0 large 2048 gb 0 x 0[0-0] miss 0 > [ 1.919874] Unable to handle kernel paging request at 000000000335aea8 RIP: > [ 1.919874] [<ffffffff8021d2d3>] change_page_attr+0x3/0x61 > [ 1.919874] PGD 0 > [ 1.919874] Oops: 0000 [1] > [ 1.919874] CPU 0 This handles addresses which don't have a mem_map entry. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: shrink __PAGE_KERNEL/__PAGE_KERNEL_EXEC on non PAE kernelsAndi Kleen
No need to make it 64bit there. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: remove unnecessary masking of addressAndi Kleen
virt_to_page does not care about the bits below the page granuality. So don't mask them. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: use wbinvd() macro instead of inline assembly in 64bit c_p_a()Andi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early_ioremap_init(), enhance warningsIngo Molnar
enhance the debug warning in early_ioremap_init(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add early_ioremap() leak detectionIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make early_ioremap_debug early_paramHuang, Ying
This patch makes "early_ioremap_debug" a early parameter, because "early_ioreamp/early_iounmap" is only used during early boot stage. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early_ioremap(), debuggingIngo Molnar
add early_ioremap() debug printouts via the early_ioremap_debug boot option. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add debug warnings to early_ioremap()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: enhance early_ioremap()Ingo Molnar
- allow nesting of up to 4 levels Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early_ioremap_reset fixHuang, Ying
This patch fixes a bug of early_ioremap_reset. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86 32-bit boot: rename bt_ioremap() to early_ioremap()Huang, Ying
This patch renames bt_ioremap to early_ioremap, which is used in x86_64. This makes it easier to merge i386 and x86_64 usage. [ mingo@elte.hu: fix ] Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: replace boot_ioremap() with enhanced bt_ioremap() - remove boot_ioremap()Huang, Ying
This patch replaces boot_ioremap invokation with bt_ioremap and removes the boot_ioremap implementation. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremapHuang, Ying
This patch makes it possible for bt_ioremap() to be used before paging_init(), via providing an early implementation of set_fixmap() that can be used before paging_init(). This way boot_ioremap() can be replaced by bt_ioremap(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: set strong uncacheable where UC is really desiredSiddha, Suresh B
Also use _PAGE_PWT for all the mappings which need uncache mapping. Instead of existing PAT2 which is UC- (and can be overwritten by MTRRs), we now use PAT3 which is strong uncacheable. This makes it consistent with pgprot_noncached() Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use __PAGE_KERNEL_EXEC in ioremap_64.cJoerg Roedel
This patch replaces the manual permission setup for pages in ioremap_64.c with the pre-defined __PAGE_KERNEL_EXEC value. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cleanup boot_ioremap_32.cThomas Gleixner
Coding style cleanup before modifying the file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/mm/pageattr-test.cIngo Molnar
fix 15 checkpatch warnings. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: c_p_a(), add simple self test at bootAndi Kleen
Since change_page_attr() is tricky code it is good to have some regression test code. This patch maps and unmaps some random pages in the direct mapping at boot and then dumps the state and does some simple sanity checks. Add it with a CONFIG option. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: return the page table level in lookup_address()Ingo Molnar
based on this patch from Andi Kleen: | Subject: CPA: Return the page table level in lookup_address() | From: Andi Kleen <ak@suse.de> | | Needed for the next change. | | And change all the callers. and ported it to x86.git. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up pte_execAndi Kleen
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing kernel specific in there. - Move it into the common file because _PAGE_NX is 0 on !PAE and then pte_exec() will be always evaluate to true. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add dump_pagetable helper to X86_32Harvey Harrison
Similar to x86 64-bit. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30c_p_a(): do a simple self test at bootAndi Kleen
When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again. This gives some simple testing for change_page_attr(). Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/mm/pageattr_64.cIngo Molnar
clean up arch/x86/mm/pageattr_64.c. no code changed: text data bss dec hex filename 1751 16 0 1767 6e7 pageattr_64.o.before 1751 16 0 1767 6e7 pageattr_64.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up arch/x86/mm/pageattr_32.cIngo Molnar
clean up arch/x86/mm/pageattr_32.c. no code changed: text data bss dec hex filename 1255 40 0 1295 50f pageattr_32.o.before 1255 40 0 1295 50f pageattr_32.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: allocate and initialize unshared pmdsJeremy Fitzhardinge
If SHARED_KERNEL_PMD is false, then we need to allocate and initialize the kernel pmd. We can easily piggy-back this onto the existing pmd prepopulation code. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: preallocate pmds at pgd creation timeJeremy Fitzhardinge
In PAE mode, an update to the pgd requires a cr3 reload to make sure the processor notices the changes. Since this also has the side-effect of flushing the tlb, its an expensive operation which we want to avoid where possible. This patch mitigates the cost of installing the initial set of pmds on process creation by preallocating them when the pgd is allocated. This avoids up to three tlb flushes during exec, as it creates the new process address space while the pagetable is in active use. The pmds will be freed as part of the normal pagetable teardown in free_pgtables, which is called in munmap and process exit. However, free_pgtables will only free parts of the pagetable which actually contain mappings, so stray pmds may still be attached to the pgd at pgd_free time. We must mop them up to prevent a memory leak. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: demacro asm-x86/pgalloc_32.hJeremy Fitzhardinge
Convert macros into inline functions, for better type-checking. This patch required a little bit of fiddling with headers in order to make __(pte|pmd)_free_tlb inline rather than macros. asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly use any pgalloc definitions. I removed this include to avoid an include cycle, but it may cause secondary compile failures by things depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one such place; there may be others. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add mm parameter to paravirt_alloc_pdJeremy Fitzhardinge
Add mm to paravirt_alloc_pd, partly to make it consistent with paravirt_alloc_pt, and because later changes will make use of it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in srat_64.cSam Ravnborg
Fix the following warnings: WARNING: arch/x86/mm/built-in.o(.text+0x1abc): Section mismatch: reference to .init.data:nodes_parsed in 'unparse_node' WARNING: arch/x86/mm/built-in.o(.text+0x1ac6): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node' WARNING: arch/x86/mm/built-in.o(.text+0x1ad2): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node' unparse_node are static and only used by acpi_scan_nodes which is already annotated __init. So we annotate unparse_node with __init. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix NUMA emulation on 64-bitMinoru Usui
I found a small bug of NUMA emulation code for x86_64. (CONFIG_NUMA_EMU) If machine is non-NUMA, find_node_by_addr() should return NUMA_NO_NODE, but current implementation code returns existent maximum NUMA node number + 1. This is not existent NUMA node number. However, this behaviour does not affect NUMA emulation fortunately, because acpi_fake_nodes() that is caller of find_node_by_addr() gets pxm (proximity domain) by node_to_pxm() from non-existent NUMA node number that was returned by find_node_by_addr(). node_to_pxm() returns PXM_INVAL that means illegal or non-existent NUMA node number. Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early cpu_to_node fix in numa_64.ctravis@sgi.com
Both of these references to cpu_to_node() can potentially occur before the "late" cpu_to_node map is setup. Therefore, they should be changed to use early_cpu_to_node(). Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change size of node ids from u8 to s16travis@sgi.com
Change the size of node ids for X86_64 from u8 to s16 to accomodate more than 32k nodes and allow for NUMA_NO_NODE (-1) to be sign extended to int. Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: make NUMA work on 32-bitMel Gorman
The DISCONTIG memory model on x86 32 bit uses a remap allocator early in boot. The objective is that portions of every node are mapped in to the kernel virtual area (KVA) in place of ZONE_NORMAL so that node-local allocations can be made for pgdat and mem_map structures. With SPARSEMEM, the amount that is set aside is insufficient for all the mem_maps to be allocated. During the boot process, it falls back to using the bootmem allocator. This breaks assumptions that SPARSEMEM makes about the layout of the mem_map in memory and results in a VM_BUG_ON triggering due to pfn_to_page() returning garbage values. This patch only enables the remap allocator for use with DISCONTIG. Without SRAT support, a compile-error occurs because ACPI table parsing functions are only available in x86-64. This patch also adds no-op stubs and prints a warning message. What likely needs to be done is sharing the table parsing functions between 32 and 64 bit if they are compatible. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix early cpu_to_node panic from nr_free_zone_pagesMike Travis
call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup yet. I also had to export x86_cpu_to_node_map_early_ptr because of some calls from the network code to numa_node_id(): net/ipv4/netfilter/arp_tables.c: net/ipv4/netfilter/ip_tables.c: net/ipv4/netfilter/ip_tables.c: Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: update reliability argument to printk_addressHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up paging_init()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: only support sparsememYinghai Lu
sparsemem is only one supported, so could remove FLAT_NODE_MEM related, that is only needed !SPARSEMEM Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use v8086_mode helper, trivial unificationHarvey Harrison
Use v8086_mode inline in fault_32.c, no functional change also ifdef the section for 32-bit only and add to fault_64.c Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add debug of invalid per_cpu map accessestravis@sgi.com
Provide a means to trap usages of per_cpu map variables before they are setup. Define CONFIG_DEBUG_PER_CPU_MAPS to activate. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change bios_cpu_apicid to percpu data variable fixuptravis@sgi.com
Change static bios_cpu_apicid array to a per_cpu data variable. This includes using a static array used during initialization similar to the way x86_cpu_to_apicid[] is handled. There is one early use of bios_cpu_apicid in apic_is_clustered_box(). The other reference in cpu_present_to_apicid() is called after smp_set_apicids() has setup the percpu version of bios_cpu_apicid. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix early NUMA-id accessMike Travis
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change NR_CPUS arrays in numa_64 fixuptravis@sgi.com
Change the following static arrays sized by NR_CPUS to per_cpu data variables: char cpu_to_node_map[NR_CPUS]; fixup: - Split cpu_to_node function into "early" and "late" versions so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and the cpu_to_node inline function is more streamlined. - This also involves setting up the percpu maps as early as possible. - Fix X86_32 NUMA build errors that previous version of this patch caused. V2->V3: - add early_cpu_to_node function to keep cpu_to_node efficient - move and rename smp_set_apicids() to setup_percpu_maps() - call setup_percpu_maps() as early as possible V1->V2: - Removed extraneous casts - Fix !NUMA builds with '#ifdef CONFIG_NUMA" Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: print which shared library/executable faulted in segfault etc. messages v3Andi Kleen
They now look like: hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000] This makes it easier to pinpoint bugs to specific libraries. And printing the offset into a mapping also always allows to find the correct fault point in a library even with randomized mappings. Previously there was no way to actually find the correct code address inside the randomized mapping. Relies on earlier patch to shorten the printk formats. They are often now longer than 80 characters, but I think that's worth it. [includes fix from Eric Dumazet to check d_path error value] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: replace hard coded reservations in 64-bit early boot code with dynamic ↵Andi Kleen
table On x86-64 there are several memory allocations before bootmem. To avoid them stomping on each other they used to be all hard coded in bad_area(). Replace this with an array that is filled as needed. This cleans up the code considerably and allows to expand its use. Cc: peterz@infradead.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify printk strings in fault_32|64.cHarvey Harrison
Adding the address of the faulting library missed removing a line ending from X86_32. Also update the shorter printk format for X86_32 in fault_64.c to make it easier to se the remaining differences. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use shorter addresses in i386 segfault printksAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fixup NR-CPUS patch for numatravis@sgi.com
This patch removes the EXPORT_SYMBOL for: x86_cpu_to_node_map_init x86_cpu_to_node_map_early_ptr ... thus fixing the section mismatch problem. Also, the mem -> node hash lookup is fixed. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 04:53:08 +0000