aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64/lib
AgeCommit message (Collapse)Author
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] constify some data tables. [CPUFREQ] constify cpufreq_driver where possible. {rd,wr}msr_on_cpu SMP=n optimization [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR rdmsr_on_cpu, wrmsr_on_cpu [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI
2007-02-20{rd,wr}msr_on_cpu SMP=n optimizationAdrian Bunk
Let's save a few bytes in the CONFIG_SMP=n case. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-20rdmsr_on_cpu, wrmsr_on_cpuAlexey Dobriyan
There was OpenVZ specific bug rendering some cpufreq drivers unusable on SMP. In short, when cpufreq code thinks it confined itself to needed cpu by means of set_cpus_allowed() to execute rdmsr, some "virtual cpu" feature can migrate process to anywhere. This triggers bugons and does wrong things in general. This got fixed by introducing rdmsr_on_cpu and wrmsr_on_cpu executing rdmsr and wrmsr on given physical cpu by means of smp_call_function_single(). Dave Jones mentioned cpufreq might be not only user of rdmsr_on_cpu() and wrmsr_on_cpu(), so I'm putting them into arch/{i386,x86_64}/lib/ . Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-13[PATCH] x86-64: Add __copy_from_user_nocacheAndi Kleen
This does user copies in fs write() into the page cache with write combining. This pushes the destination out of the CPU's cache, but allows higher bandwidth in some case. The theory is that the page cache data is usually not touched by the CPU again and it's better to not pollute the cache with it. Also it is a little faster. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Don't force inlining of do_csumAndi Kleen
It's two big and used by two callers. Calls should be cheap enough anyways. Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07[PATCH] x86-64: Make x86_64 udelay() round up instead of down.Paolo 'Blaisorblade' Giarrusso
Port two patches from i386 to x86_64 delay.c to make sure all rounding is done upward instead of downward. There is no sign in commit messages that the mismatch was done on purpose, and "delay() guarantees sleeping at least for the specified time" is still a valid rule IMHO. The original x86 patches are both from pre-GIT era, i.e.: "[PATCH] round up in __udelay()" in commit 54c7e1f5cc6771ff644d7bc21a2b829308bd126f "[PATCH] add 1 in __const_udelay()" in commit 42c77a9801b8877d8b90f65f75db758822a0bccc (both commits are from converted BK repository to x86_64). AK: fixed gcc warning linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift (did this actually work?) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-02[NET]: X86_64 checksum annotations and cleanups.Al Viro
* sanitize prototypes, annotate * usual ntohs->shift Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-09-26[PATCH] Fix zeroing on exception in copy_*_userAndi Kleen
- Don't zero for __copy_from_user_inatomic following i386. This will prevent spurious zeros for parallel file system writers when one does a exception - The string instruction version didn't zero the output on exception. Oops. Also I cleaned up the code a bit while I was at it and added a minor optimization to the string instruction path. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] annotate arch/x86_64/lib/*.SJan Beulich
Add unwind annotations to arch/x86_64/lib/*.S, and also use the macros provided by linux/linkage.h where-ever possible. Some of the alternative instructions handling needed to be adjusted so that the replacement code would also have valid unwind information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] Remove leftover CVS Id in thunk.SAndi Kleen
And move the comment to a proper place. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] Clean up read write lock assemblyAndi Kleen
- Move the slow path fallbacks to their own assembly files This makes them much easier to read and is needed for the next change. - Add CFI annotations for unwinding (XXX need review) - Remove constant case which can never happen with out of line spinlocks - Use patchable LOCK prefixes - Don't use lock sections anymore for inline code because they can't be expressed by the unwinder (this adds one taken jump to the lock fast path) Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-07-03[PATCH] lockdep: irqtrace cleanup of include/asm-x86_64/irqflags.hIngo Molnar
Clean up the x86-64 irqflags.h file: - macro => inline function transformation - simplifications - style fixes Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: Minor string functions optimizationsAndi Kleen
- Use tail call from clear_user to __clear_user to save some code size - Use standard memcpy for forward memmove Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: Move export symbols to their C functionsAndi Kleen
Only exports for assembler files are left in x8664_ksyms.c Originally inspired by a patch from Al Viro Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: remove dead do_softirq_thunkJan Beulich
Appearantly a left-over... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Undo the earlier changes to remove unrolled copy/memset ↵Andi Kleen
functions They cause quite bad performance regressions on Netburst This is temporary until we can get new optimized functions for these CPUs. This undoes changes that were done in 2.6.15 and in 2.6.16-rc1, essentially bringing the code back to 2.6.14 level. Only change is I renamed the X86_FEATURE_K8_C flag to X86_FEATURE_REP_GOOD and fixed the check for the flag and also fixed some comments. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] Add faster __iowrite32_copy routine for x86_64Bryan O'Sullivan
This assembly version is measurably faster than the generic version in lib/iomap_copy.c. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Display meaningful part of filename during BUG()Jan Beulich
When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Clean up copy_*_userAndi Kleen
- Remove optimization for old B stepping Opteron - Make the fast path for copies with a multiple of eight length faster. - Minor instruction rearrangement to hopefully avoid a pipeline stall or two. - Add comment about errata to consider. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Make udelay more accurateRoss Biro
The attempt to avoid overflow in __delay caused varying precision on different CPUs depending on differences in the CPU speed. We should be able to do this multiplication with out overflowing provided the cpu is running at less than about 128 GHz. xloops < 20000 * 0x10c6. loops_per_jiffy * HZ <= cpu_clock_speed. So if the cpu clock speed < 2^64/(20000 * 0x10c6) = 2^64/ 51E6CC0 < 2^64/2^27 = 2^37 = 128G we will not overflow the calculation. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Remove optimization for B stepping AMD K8Andi Kleen
B stepping were the first shipping Opterons. memcpy/memset/copy_page/ clear_page had special optimized version for them. These are really old and in the minority now and the difference to the generic versions (using rep microcode) is not that big anyways. So just remove them. TODO: figure out optimized versions for Intel Netburst based EM64T Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02[PATCH] x86-64: bitops fix for -OsAlexandre Oliva
This fixes the x86-64 find_[first|next]_zero_bit() function for the end-of-range case. It didn't test for a zero size, and the "rep scas" would do entirely the wrong thing. Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14[LIB]: Consolidate _atomic_dec_and_lock()David S. Miller
Several implementations were essentialy a common piece of C code using the cmpxchg() macro. Put the implementation in one spot that everyone can share, and convert sparc64 over to using this. Alpha is the lone arch-specific implementation, which codes up a special fast path for the common case in order to avoid GP reloading which a pure C version would require. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-09kbuild: alpha,x86_64 use generic asm-offsets.h supportSam Ravnborg
Delete obsolete stuff from arch makefiles Rename .h file to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-30[PATCH] x86_64: fix bug in csum_partial_copy_generic()Dave Peterson
I was observing reproducible crashes on the "movw %bx,(%rsi)" instruction below while a process in a recvfrom() system call was copying packet data to user space. The patch below fixes the exception table and causes the crash to no longer reproduce. Please apply. Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] x86_64: Remove unused variable in delay.cAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] Platform SMIs and their interferance with tsc based delay calibrationVenkatesh Pallipadi
Issue: Current tsc based delay_calibration can result in significant errors in loops_per_jiffy count when the platform events like SMIs (System Management Interrupts that are non-maskable) are present. This could lead to potential kernel panic(). This issue is becoming more visible with 2.6 kernel (as default HZ is 1000) and on platforms with higher SMI handling latencies. During the boot time, SMIs are mostly used by BIOS (for things like legacy keyboard emulation). Description: The psuedocode for current delay calibration with tsc based delay looks like (0) Estimate a value for loops_per_jiffy (1) While (loops_per_jiffy estimate is accurate enough) (2) wait for jiffy transition (jiffy1) (3) Note down current tsc (tsc1) (4) loop until tsc becomes tsc1 + loops_per_jiffy (5) check whether jiffy changed since jiffy1 or not and refine loops_per_jiffy estimate Consider the following cases Case 1: If SMIs happen between (2) and (3) above, we can end up with a loops_per_jiffy value that is too low. This results in shorted delays and kernel can panic () during boot (Mostly at IOAPIC timer initialization timer_irq_works() as we don't have enough timer interrupts in a specified interval). Case 2: If SMIs happen between (3) and (4) above, then we can end up with a loops_per_jiffy value that is too high. And with current i386 code, too high lpj value (greater than 17M) can result in a overflow in delay.c:__const_udelay() again resulting in shorter delay and panic(). Solution: The patch below makes the calibration routine aware of asynchronous events like SMIs. We increase the delay calibration time and also identify any significant errors (greater than 12.5%) in the calibration and notify it to user. Patch below changes both i386 and x86-64 architectures to use this new and improved calibrate_delay_direct() routine. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] smp_processor_id() cleanupIngo Molnar
This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-22[PATCH] x86_64: fix new out of line put_user()Alexander Nyberg
The labels after the last put_user patch were misplaced so exceptions on the real mov instructions would not be handled. Noted by Brian Gerst <bgerst@didntduck.org>
2005-04-21[PATCH] x86_64: Bug in new out of line put_user()Alexander Nyberg
The new out of line put_user() assembly on x86_64 changes %rcx without telling GCC about it causing things like: http://bugme.osdl.org/show_bug.cgi?id=4515 See to it that %rcx is not changed (made it consistent with get_user()). Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: ak@suse.de Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!