aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-12-21powerpc/mm: Split mmu_context handlingBenjamin Herrenschmidt
This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/4xx: Extended DCR support v2Benjamin Herrenschmidt
This adds supports to the "extended" DCR addressing via the indirect mfdcrx/mtdcrx instructions supported by some 4xx cores (440H6 and later). I enabled the feature for now only on AMCC 460 chips. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add reboot notifier to Collaborative Memory ManagerBrian King
When running Active Memory Sharing, pages can get marked as "loaned" with the hypervisor by the CMM driver. This state gets cleared by the system firmware when rebooting the partition. When using kexec to boot a new kernel, this state never gets cleared and the hypervisor and CMM driver can get out of sync with respect to the number of pages currently marked "loaned". Fix this by adding a reboot notifier to the CMM driver to deflate the balloon and mark all pages as active. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Disable Collaborative Memory Manager for kdumpBrian King
When running Active Memory Sharing, the Collaborative Memory Manager (CMM) may mark some pages as "loaned" with the hypervisor. Periodically, the CMM will query the hypervisor for a loan request, which is a single signed value. When kexec'ing into a kdump kernel, the CMM driver in the kdump kernel is not aware of the pages the previous kernel had marked as "loaned", so the hypervisor and the CMM driver are out of sync. This results in the CMM driver getting a negative loan request, which can then get treated as a large unsigned value and can cause kdump to hang due to the CMM driver inflating too large. Since there really is no clean way for the CMM driver in the kdump kernel to clean this up, simply disable CMM in the kdump kernel. This fixes hangs we were seeing doing kdump with AMS. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/iseries: viodasd needs to depend on CONFIG_BLOCKStephen Rothwell
Otherwise you get lot of errors like these: drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_open': drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_release': drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_getgeo': drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity' drivers/block/viodasd.c: At top level: drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer Discovered by a randconfig build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Pass a valid token to rtas_call() in phyp-dump codeTony Breeds
ibm_configure_kernel_dump is passed as the token to rtas_call() is never initialised. This sets it to something sane. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Nathan Lynch <ntl@pobox.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Protect against NULL pointer deref in phyp-dump codeTony Breeds
print_dump_header() will be called at least once with a NULL pointer in a normal boot sequence. If DEBUG is defined then we will dereference the pointer and crash. Add a quick fix to exit early in the NULL pointer case. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Rename struct vm_region to avoid conflict with NOMMUDavid Howells
Rename PowerPC's struct vm_region so that I can introduce my own global version for NOMMU. It's feasible that the PowerPC version may wish to use my global one instead. The NOMMU vm_region struct defines areas of the physical memory map that are under mmap. This may include chunks of RAM or regions of memory mapped devices, such as flash. It is also used to retain copies of file content so that shareable private memory mappings of files can be made. As such, it may be compatible with what is described in the banner comment for PowerPC's vm_region struct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert sysfs cache code to of_find_next_cache_node()Nathan Lynch
Using the common code means that more complete cache information will provided in sysfs on platforms that don't use the l2-cache property convention. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert cpu_to_l2cache() to of_find_next_cache_node()Nathan Lynch
The smp code uses cache information to populate cpu_core_map; change it to use common code for cache lookup. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add of_find_next_cache_node()Nathan Lynch
We have more than one piece of code that looks up cache nodes manually using the "l2-cache" property. Add a common helper routine which does this and handles ePAPR's "next-level-cache" property as well as powermac. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18Merge branch 'linux-2.6' into nextPaul Mackerras
2008-12-17Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc: Fix corruption error in rh_alloc_fixed() powerpc/fsl-booke: Fix the miss interrupt restore
2008-12-17powerpc: Fix corruption error in rh_alloc_fixed()Guillaume Knispel
There is an error in rh_alloc_fixed() of the Remote Heap code: If there is at least one free block blk won't be NULL at the end of the search loop, so -ENOMEM won't be returned and the else branch of "if (bs == s || be == e)" will be taken, corrupting the management structures. Signed-off-by: Guillaume Knispel <gknispel@proformatique.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17powerpc/fsl-booke: Fix the miss interrupt restoreDave Liu
The commit e5e774d8833de1a0037be2384efccadf16935675 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda712) MSR: 00021000 <ME> CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next
2008-12-16Merge branch 'sh/for-2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Disable GENERIC_HARDIRQS_NO__DO_IRQ for unconverted platforms. sh: maple: Do not pass SLAB_POISON to kmem_cache_create()
2008-12-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/cell/axon-msi: Fix MSI after kexec powerpc: Fix bootmem reservation on uninitialized node powerpc: Check for valid hugepage size in hugetlb_get_unmapped_area
2008-12-16sh: Disable GENERIC_HARDIRQS_NO__DO_IRQ for unconverted platforms.Paul Mundt
Presently limited to Cayman, Dreamcast, Microdev, and SystemH 7751. Re-enable it for everyone once these have been fixed up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-16powerpc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Remove flush_HPTE()Benjamin Herrenschmidt
The function flush_HPTE() is used in only one place, the implementation of DEBUG_PAGEALLOC on ppc32. It's actually a dup of flush_tlb_page() though it's -slightly- more efficient on hash based processors. We remove it and replace it by a direct call to the hash flush code on those processors and to flush_tlb_page() for everybody else. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Rename tlb_32.c and tlb_64.c to tlb_hash32.c and tlb_hash64.cBenjamin Herrenschmidt
This renames the files to clarify the fact that they are used by the hash based family of CPUs (the 603 being an exception in that family but is still handled by that code). This paves the way for the new tlb_nohash.c coming via a subsequent commit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/mm: Add local_flush_tlb_mm() to SW loaded TLB implementationsBenjamin Herrenschmidt
This adds a local_flush_tlb_mm() call as a pre-requisite for some SMP work for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix asm EMIT_BUG_ENTRY with !CONFIG_BUGBenjamin Herrenschmidt
Instead of not defining it at all, this defines the macro as being empty, thus avoiding ifdef's in call sites when CONFIG_BUG is not set. Also removes an extra whitespace in the existing definition. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove dead BIO_VMERGE_BOUNDARY definitionFUJITA Tomonori
The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY definition is meaningless now (For POWER, BIO_VMERGE_BOUNDARY has been meaningless for a long time since POWER disables the virtual merge feature). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Introduce ppc_pci_flags accessorsJosh Boyer
Currently there are a number of platforms that open code access to the ppc_pci_flags global variable. However, that variable is not present if CONFIG_PCI is not set, which can lead to a build break. This introduces a number of accessor functions that are defined to be empty in the case of CONFIG_PCI being disabled. The various platform files in the kernel are updated to use these. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/pseries: Check for GIQ indicator before calling set-indicatorNathan Lynch
Since "Factor out cpu joining/unjoining the GIQ" (b4963255ad5a426f04a0bb15c4315fa4bb40cde9) the WARN_ON in xics_set_cpu_giq() is being triggered during boot on JS20 because the GIQ indicator is not available on that platform. While the warning is harmless and the system runs normally, it's nicer to check for the existence of the indicator before trying to manipulate it. Implement rtas_indicator_present(), which searches the /rtas/rtas-indicators property for the given indicator token, and use this function in xics_set_cpu_giq(). Also use a WARN statement in xics_set_cpu_giq to get better information on failure. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/powermac: Use set_hard_smp_processor_id() instead of smp_hw_indexNathan Lynch
The hard_smp_processor_id functions are the appropriate interfaces for managing physical CPU ids. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Move smp_hw_index to 32-bit codeNathan Lynch
smp_hw_index isn't used on 64-bit, so move it from smp.c to setup_32.c. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Remove `have_of' global variableAnton Vorontsov
The `have_of' variable is a relic from the arch/ppc time, it isn't useful nowadays. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix !CONFIG_PPC_NEED_DMA_SYNC_OPS build warningBecky Bruce
Change #define stubs of dma_sync ops to be empty static inlines to avoid build warning. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Add sub-match id modalias supportGeert Uytterhoeven
commit 059e4938f8b060b10c4352e6c45739473bc73267 ("powerpc/ps3: Add a sub-match id to ps3_system_bus") forgot to update the module alias support: - Add the sub-match ids to the module aliases, so udev can distinguish between different types of sub-devices. - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb binds to the "FB" sub-device. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/ps3: Quiet dmesg outputGeoff Levand
Change the debug message in dma_sb_region_create() from pr_info() to DBG() to quiet the dmesg output. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix typo in pgtable-ppc64.hGeoff Levand
Fix a minor comment typo in pgtable-ppc64.h. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc/chrp: Add missing of_node_put in pci.cNicolas Palix
of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code or when the device node is no longer used. The semantic match that catches the bug is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression struct device_node *n; position p1, p2; statement S1,S2; expression E,E1; expression *ptr != NULL; @@ ( if (!(n@p1 = of_find_node_by_name(...))) S1 | n@p1 = of_find_node_by_name(...) ) <... when != of_node_put(n) when != if (...) { <+... of_node_put(n) ...+> } when != true !n || ... when != n = E when != E = n if (!n || ...) S2 ...> ( return \(0\|<+...n...+>\|ptr\); | return@p2 ...; | n = E1 | E1 = n ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Nicolas Palix <npalix@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-16powerpc/cell/axon-msi: Fix MSI after kexecArnd Bergmann
Commit d015fe995 'powerpc/cell/axon-msi: Retry on missing interrupt' has turned a rare failure to kexec on QS22 into a reproducible error, which we have now analysed. The problem is that after a kexec, the MSIC hardware still points into the middle of the old ring buffer. We set up the ring buffer during reboot, but not the offset into it. On older kernels, this would cause a storm of thousands of spurious interrupts after a kexec, which would most of the time get dropped silently. With the new code, we time out on each interrupt, waiting for it to become valid. If more interrupts come in that we time out on, this goes on indefinitely, which eventually leads to a hard crash. The solution in this commit is to read the current offset from the MSIC when reinitializing it. This now works correctly, as expected. Reported-by: Dirk Herrendoerfer <d.herrendoerfer@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Fix bootmem reservation on uninitialized nodeDave Hansen
careful_allocation() was calling into the bootmem allocator for nodes which had not been fully initialized and caused a previous bug: http://patchwork.ozlabs.org/patch/10528/ So, I merged a few broken out loops in do_init_bootmem() to fix it. That changed the code ordering. I think this bug is triggered by having reserved areas for a node which are spanned by another node's contents. In the mark_reserved_regions_for_nid() code, we attempt to reserve the area for a node before we have allocated the NODE_DATA() for that nid. We do this since I reordered that loop. I suck. This is causing crashes at bootup on some systems, as reported by Jon Tollefson. This may only present on some systems that have 16GB pages reserved. But, it can probably happen on any system that is trying to reserve large swaths of memory that happen to span other nodes' contents. This commit ensures that we do not touch bootmem for any node which has not been initialized, and also removes a compile warning about an unused variable. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16powerpc: Check for valid hugepage size in hugetlb_get_unmapped_areaBrian King
It looks like most of the hugetlb code is doing the correct thing if hugepages are not supported, but the mmap code is not. If we get into the mmap code when hugepages are not supported, such as in an LPAR which is running Active Memory Sharing, we can oops the kernel. This fixes the oops being seen in this path. oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs(N) lockd(N) nfs_acl(N) sunrpc(N) ipv6(N) fuse(N) loop(N) dm_mod(N) sg(N) ibmveth(N) sd_mod(N) crc_t10dif(N) ibmvscsic(N) scsi_transport_srp(N) scsi_tgt(N) scsi_mod(N) Supported: No NIP: c000000000038d60 LR: c00000000003945c CTR: c0000000000393f0 REGS: c000000077e7b830 TRAP: 0300 Tainted: G (2.6.27.5-bz50170-2-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 44000448 XER: 20000001 DAR: c000002000af90a8, DSISR: 0000000040000000 TASK = c00000007c1b8600[4019] 'hugemmap01' THREAD: c000000077e78000 CPU: 6 GPR00: 0000001fffffffe0 c000000077e7bab0 c0000000009a4e78 0000000000000000 GPR04: 0000000000010000 0000000000000001 00000000ffffffff 0000000000000001 GPR08: 0000000000000000 c000000000af90c8 0000000000000001 0000000000000000 GPR12: 000000000000003f c000000000a73880 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000010000 GPR20: 0000000000000000 0000000000000003 0000000000010000 0000000000000001 GPR24: 0000000000000003 0000000000000000 0000000000000001 ffffffffffffffb5 GPR28: c000000077ca2e80 0000000000000000 c00000000092af78 0000000000010000 NIP [c000000000038d60] .slice_get_unmapped_area+0x6c/0x4e0 LR [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 Call Trace: [c000000077e7bbc0] [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 [c000000077e7bc30] [c000000000107e30] .get_unmapped_area+0x64/0xd8 [c000000077e7bcb0] [c00000000010b140] .do_mmap_pgoff+0x140/0x420 [c000000077e7bd80] [c00000000000bf5c] .sys_mmap+0xc4/0x140 [c000000077e7be30] [c0000000000086b4] syscall_exit+0x0/0x40 Instruction dump: fac1ffb0 fae1ffb8 fb01ffc0 fb21ffc8 fb41ffd0 fb61ffd8 fb81ffe0 fbc1fff0 fbe1fff8 f821fef1 f8c10158 f8e10160 <7d49002e> f9010168 e92d01b0 eb4902b0 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-15Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5348/1: fix documentation wrt location of the alignment trap interface [ARM] Ensure linux/hardirqs.h is included where required [ARM] fix kernel-doc syntax [ARM] arch/arm/common/sa1111.c: Correct error handling code [ARM] 5341/2: there is no copy_page on nommu ARM
2008-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Phonet: keep TX queue disabled when the device is off SCHED: netem: Correct documentation comment in code. netfilter: update rwlock initialization for nat_table netlabel: Compiler warning and NULL pointer dereference fix e1000e: fix double release of mutex IA64: HP_SIMETH needs to depend upon NET netpoll: fix race on poll_list resulting in garbage entry ipv6: silence log messages for locally generated multicast sungem: improve ethtool output with internal pcs and serdes tcp: tcp_vegas cong avoid fix sungem: Make PCS PHY support partially work again.
2008-12-15powerpc/85xx: Fix compile issues with mpc8572ds.dtsKumar Gala
Fix the localbus reg & range properties to respect that the top level #address-cells and #size-cells = 2. The original commit (c64ef80b517680f1e228b2ee55e3ce7cd94c7fe0) did not do that. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15powerpc: Fix bogus cache flushing on all 40x and BookE processors v2Benjamin Herrenschmidt
We were missing the CPU_FTR_NOEXECUTE bit in our cputable for all these processors. The result is that update_mmu_cache() would flush the cache for all pages mapped to userspace which is totally unnecessary on those processors since we already handle flushing on execute in the page fault path. This should provide a nice speed up ;-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15[ARM] Ensure linux/hardirqs.h is included where requiredRussell King
... for the removal of it from asm-generic/local.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
2008-12-14x86 Fix VMI crash on boot in 2.6.28-rc8Zachary Amsden
VMI initialiation can relocate the fixmap, causing early_ioremap to malfunction if it is initialized before the relocation. To fix this, VMI activation is split into two phases; the detection, which must happen before setting up ioremap, and the activation, which must happen after parsing early boot parameters. This fixes a crash on boot when VMI is enabled under VMware. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-14[ARM] fix kernel-doc syntaxRandy Dunlap
Fix kernel-doc notation to use correct syntax. Even though this should be moved to where the function is actually implemented... Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] arch/arm/common/sa1111.c: Correct error handling codeJulia Lawall
If it is reasonable to apply PTR_ERR to the result of calling clk_get, then that result should first be tested with IS_ERR, not with !. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E,E1; @@ if ( - E == NULL + IS_ERR(E) ) { <+... when != E = E1 PTR_ERR(E) ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13powerpc/fsl-booke: Fix problem with _tlbil_va being interruptedKumar Gala
An example calling sequence which we did see: copy_user_highpage -> kmap_atomic -> flush_tlb_page -> _tlbil_va We got interrupted after setting up the MAS registers before the tlbwe and the interrupt handler that caused the interrupt also did a kmap_atomic (ide code) and thus on returning from the interrupt the MAS registers no longer contained the proper values. Since we dont save/restore MAS registers for normal interrupts we need to disable interrupts in _tlbil_va to ensure atomicity. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx: powerpc/40x: Add proper BOOTCFLAGS for cuboot-acadia