aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2005-09-02[PATCH] m68knommu: fix ColdFire startup code to properly handle non 0 based ramGreg Ungerer
Correctly determine the end of ram for ram setups that do not start at base address of 0. Add support for the MOD5272 board, which doesn not have a ram base of 0. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: new family (523x) and board setupGreg Ungerer
. setup for the new 523x ColdFire family . break up of 527x to be 5271 and 5275 . some white space cleanup Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: 523x ColdFire processor init codeGreg Ungerer
Low level initialization code for the 523x ColdFire processor family. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm Linus Torvalds
2005-09-01[ARM] Fix ARMv6 page table bitsRussell King
We weren't explicitly setting the page table bits we desired in user_prot in the protection table, which resulted in the user mappings for v6 CPUs being marked global. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01Merge refs/heads/release from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-09-01Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm.git Linus Torvalds
2005-09-01[PATCH] ppc: L2 cache prefetch fixes on 745xKumar Gala
We run into problems if we blindly enable L2 prefetching without checking that the L2 cache is actually enabled. Additionaly, if we disable the L2 cache we need to ensure that we disable L2 prefetching. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-01[PATCH] Fix bug in ppc64 dynamic hugepage supportDavid Gibson
In adjusting the logic for SLB miss for the dynamic hugepage stuff, I messed up the !CONFIG_HUGETLB_PAGE case, failing to set the SLB flags properly. This fixes it. It also streamlines the logic for the HUGETLB_PAGE case (removing a couple of branches) while we're at it. Booted, and roughly tested on POWER5 (with and without HUGETLB_PAGE), iSeries/RS64 (no hugepage available), and G5 (with and without HUGETLB_PAGE). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-01[ARM] Simplify setup_mm_for_reboot()Russell King
No point checking what CPU architecture level we have each time within the loop, so precompute the base PMD flags outside the loop. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01[ARM] Convert open-coded __pmd_populate to use inline functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01[ARM] 2864/1: VST aka CONFIG_NO_IDLE_HZ support for SA11x0Nicolas Pitre
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01[ARM] 2863/1: clarify comment in PXA2xx and SA1x00 timer codeNicolas Pitre
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01[ARM] 2862/1: VST aka CONFIG_NO_IDLE_HZ support for PXA2xxNicolas Pitre
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-01[ARM] 2865/2: fix fadvise64_64 syscall argument passingNicolas Pitre
Patch from Nicolas Pitre The prototype for sys_fadvise64_64() is: long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice) The argument list is therefore as follows on legacy ABI: fd: type int (r0) offset: type long long (r1-r2) len: type long long (r3-sp[0]) advice: type int (sp[4]) With EABI this becomes: fd: type int (r0) offset: type long long (r2-r3) len: type long long (sp[0]-sp[4]) advice: type int (sp[8]) Not only do we have ABI differences here, but the EABI version requires one additional word on the syscall stack. To avoid the ABI mismatch and the extra stack space required with EABI this syscall is now defined with a different argument ordering on ARM as follows: long sys_arm_fadvise64_64(int fd, int advice, loff_t offset, loff_t len) This gives us the following ABI independent argument distribution: fd: type int (r0) advice: type int (r1) offset: type long long (r2-r3) len: type long long (sp[0]-sp[4]) Now, since the syscall entry code takes care of 5 registers only by default including the store of r4 to the stack, we need a wrapper to store r5 to the stack as well. Because that wrapper was missing and was always required this means that sys_fadvise64_64 never worked on ARM and therefore we can safely reuse its syscall number for our new sys_arm_fadvise64_64 interface. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-31Auto-update from upstreamTony Luck
2005-08-31[IA64] uncached allocator: use generic (not sn2 specific) functionsMartin Hicks
Change sn2-specific calls into generic functions. Without this change the uncached allocator will not work on non-sn2 platforms. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31[ARM] 2868/1: Include linux/cpumask.h in arch/arm/common/gic.cCatalin Marinas
Patch from Catalin Marinas Minor compilation error fix. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-31[ARM] 2867/2: unaligned ldrd/strd fixupsSteve Longerbeam
Patch from Steve Longerbeam Adds an implementation of unaligned LDRD and STRD fixups. Also fixes a bug where do_alignment() would misinterpret and fixup an unaligned LDRD/STRD as LDRH/STRH, causing memory corruption. This is the same as Patch #2867/1, but with minor whitespace and comments changes, plus a check for arch-level >= v5TE before printing ai_dword count in proc_alignment_read(). Signed-off-by: Steve Longerbeam <stevel@mwwireless.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-31[ARM] 2857/2: Dynamic tick - fix OOPS if configured and not providedBen Dooks
Patch from Ben Dooks timer_dyn_reprogram() fails with an OOPS if the configuration for CONFIG_NO_IDLE_HZ is enabled, and the system has no support for it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-30[PATCH] ppc32 8xx: fix warnings in m8xx_setup.cMarcelo Tosatti
The following patch fixes two warnings in arch/ppc/syslib/m8xx_setup.c Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30[PATCH] x86: pci_assign_unassigned_resources() updateIvan Kokshaysky
I had some time to think about PCI assign issues in 2.6.13-rc series. The major problem here is that we call pci_assign_unassigned_resources() way too early - at subsys_initcall level. Therefore we give no chances to ACPI and PnP routines (called at fs_initcall level) to reserve their respective resources properly, as the comments in drivers/pnp/system.c and drivers/acpi/motherboard.c suggest: /** * Reserve motherboard resources after PCI claim BARs, * but before PCI assign resources for uninitialized PCI devices */ So I moved the pci_assign_unassigned_resources() call to pcibios_assign_resources() (fs_initcall), which should hopefully fix a lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary. Other changes: - remove resource assignment code from pcibios_assign_resources(), since it duplicates pci_assign_unassigned_resources() functionality and actually does nothing in 2.6.13; - modify ROM assignment code as per Ben's suggestion: try to use firmware settings by default (if PCI_ASSIGN_ROMS is not set); - set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for various setups. Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with the 4kB CardBus IO size previously). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30Auto-update from upstreamTony Luck
2005-08-30[PATCH] Remove nested feature sectionsDavid Gibson
The {BEGIN,END}_FTR_SECTION asm macros used in ppc64 to nop out sections of code at runtime cannot be nested. However, we do nest them in hash_low.S. We get away with it there, because there is nothing between the BEGIN markers for each section. However, that's confusing to someone reading the code. This patch removes the nested ifset and ifclr feature sections, replacing them with a single feature section in the full mask/value form. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: lparconfig.c memory leakJoel Schopp
This patch fixes a rare memory leak found by Coverity. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: of_device.c remove useless codeJoel Schopp
Coverity found more unused code. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: Add CONFIG_HZAnton Blanchard
While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being used. Connect it up and set all platforms to 250Hz. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] oprofile PVR 970MPJake Moilanen
Here's the 970MP's PVR (processor version register) entry for oprofile. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] PPC64: Don't try to claim memory from OF at 1GB markOlof Johansson
Some RS64-based machines (p620, F80, others) have problems with firmware returning 0xdeadbeef instead of failure to allocations that end at the 1GB mark. We have two options: 1. Detect the undocumented 0xdeadbeef return value and interpret it as a failure. 2. Avoid allocating that high. (2) is really the cleaner solution here. 768MB is plenty of room so use that as the max alloc_top instead of 1GB. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create include/asm-powerpcStephen Rothwell
The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Make MODULE_DEVICE_TABLE work for vio devicesStephen Rothwell
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_bus_opsStephen Rothwell
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_register_deviceStephen Rothwell
Take some assignments out of vio_register_device_common and rename it to vio_register_device. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Formatting changes to vio.cStephen Rothwell
Formatting changes to vio.c to bring it closer to the kernel coding standard. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] fix iSeries build for gcc-3.4Stephen Rothwell
gcc 3.4 (at least the build we are using) puts the gcc generated .ident string into a .note section at the end of the files it compiles (gcc 3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section). This means that the lparmap.s file we produce in the iSeries build may end with a .note section. When we include it into head.S, the assembler can no longer resolve some of the conditional branches since the target label ends up too far away. This patch just forces us back to the .text section after including lparmap.s. The breakage was caused by my patch "iSeries build with newer assemblers and compilers" (sha1-id: 2ad56496627630ebc99f06af5f81ca23e17e014e). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Restore lparmap.s include for iSeriesDavid Gibson
A mistake rebasing the series of ppc64 head.S cleanup patches meant the #include of lparmap.s, needed for iSeries was lost. This patch puts it back again. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 Linus Torvalds
2005-08-29Pull rationalise-regions into release branchTony Luck
2005-08-29Pull ngam-maule-steiner into release branchTony Luck
2005-08-29Pull pending-2.6.14 into release branchTony Luck
2005-08-29[ARM] 2853/1: Make alloc_init_supersection() work with 36-bit mappingsDeepak Saxena
Patch from Deepak Saxena Working on adding support for 36-bit static mappings for ARMv6 and Intel's XSC3 core and noticed that alloc_init_supersection currently increments the phys addr by 1MB on each of the 16 iterations and then forces alignment to supersection size (16MB). This is really uneeded b/c we have already forced the phys address to be 16MB aligned in create_mapping(). Furthermore, this breaks 36-bit addressing b/c bits [23:20] of the PMD contain bits [35:32] of the physical address and the masking causes us to loose those bits thus ending up with an incorrect virt -> phys translation. The other option is to have an alloc_init_supersection36. Tested on Intel IXP2350 CPU with 36-bit static I/O mappings. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29[ARM] 2856/1: S3C2440 - show DVS status at startupBen Dooks
Patch from Ben Dooks Show the state of DVS (Dynamic Voltage Scaling) when starting up on the S3C2440 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29[ARM] 2855/1: S3C2410 - add CLKSLOW definitions, and show in initBen Dooks
Patch from Ben Dooks Add the definitions for the S3C2410_CLKSLOW registers to the header files, and show the values when the system starts up Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29[ARM] 2836/1: Cleanup IXP4xx GPIO codeDeepak Saxena
Patch from Deepak Saxena This patch implements the set_irq_type() hooks for configuring GPIO IRQ type and updates all the platforms to use it instead of the gpio_line_config() function which is now used to configure input vs. output on the pins. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29[ARM] 2834/1: Remove IXP4xx board-specific map_io routinesDeepak Saxena
Patch from Deepak Saxena None of the board-specific map_io routines do anything, so kill them. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29Pull acpi-p-state into release branchTony Luck
2005-08-29Pull asm-segment into release branchTony Luck
2005-08-29Pull swiotlb-size into release branchTony Luck
2005-08-29[SPARC64]: More fully work around Spitfire Errata 51.David S. Miller
It appears that a memory barrier soon after a mispredicted branch, not just in the delay slot, can cause the hang condition of this cpu errata. So move them out-of-line, and explicitly put them into a "branch always, predict taken" delay slot which should fully kill this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: Make debugging spinlocks usable again.David S. Miller
When the spinlock routines were moved out of line into kernel/spinlock.c this made it so that the debugging spinlocks record lock acquisition program counts in the kernel/spinlock.c functions not in their callers. This makes the debugging info kind of useless. So record the correct caller's program counter and now this feature is useful once more. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:00:41 +0000