aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-08-07USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers ARM: S3C64XX: serial: Fix section mismatch warning ARM: S3C24XX: serial: Fix section mismatch warnings ARM: S3C: PWM fix for low duty cycle ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization ARM: 5627/1: Fix restoring of lr at the end of mcount ARM: 5624/1: Document cache aliasing region S3C64XX: Fix ARMCLK configuration S3C64XX: Fix get_rate() for ARMCLK S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip mx3 defconfig update mx27 defconfig update ARM: 5623/1: Treo680: ir shutdown typo fix ARM: includecheck fix: plat-stmp3xxx/pinmux.c ARM: includecheck fix: plat-s3c64xx/pm.c ARM: includecheck fix: mach-omap2/mcbsp.c ARM: includecheck fix: mach-omap1/mcbsp.c ARM: includecheck fix: board-sffsdr.c ...
2009-08-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] KVM: Read buffer overflow [S390] kernel: Storing machine flags early in lowcore
2009-08-07[S390] KVM: Read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-08-07[S390] kernel: Storing machine flags early in lowcoreHendrik Brueckner
Currently, the machine_flags are stored late in the startup initialization which results in failing machine type checks (e.g. for MACHINE_IS_VM). To allow these checks, store the machine flags in the lowcore when the machine type has been detected. Moving the machine_flags to the lowcore has been introduced with git commit 25097bf153391f7be4c591d47061b3dc4990dac2 Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-08-06perf_counter/powerpc: Check oprofile_cpu_type for NULL before using itBenjamin Herrenschmidt
If the current CPU doesn't support performance counters, cur_cpu_spec->oprofile_cpu_type can be NULL. The current perf_counter modules don't test for that case and would thus crash at boot time. Bug reported by David Woodhouse. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>Hartley Sweeten
<linux/clk.h> should be included to get the base API prototypes. This fixes the following sparse warnings: arch/arm/common/clkdev.c:65:12: warning: symbol 'clk_get_sys' was not declared. Should it be static? arch/arm/common/clkdev.c:79:12: warning: symbol 'clk_get' was not declared. Should it be static? arch/arm/common/clkdev.c:87:6: warning: symbol 'clk_put' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCHHartley Sweeten
preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in driversAndrew Victor
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (32 commits) MIPS: Wire up accept4 syscall. MIPS: VPE: Delete unused function get_tc_unused(). MIPS: VPE: Fix bogus indentation. MIPS: VPE: Make various functions static. MIPS: VPE: Free relocation chain on error. MIPS: VPE: Fix compiler warning. MIPS: Module: Make error messages unique. MIPS: Octeon: Run IPI code with interrupts disabled. MIPS: Jazz: Fix read buffer overflow MIPS: Use DIV_ROUND_CLOSEST MIPS: MTX-1: Request button GPIO before setting its direction MIPS: AR7: Override CFLAGS with -Werror MIPS: AR7: Remove unused tnetd7200_get_clock function MIPS: AR7: Use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabled MIPS: Fix read buffer overflow MIPS: AR7: Fix build warning on memory.c MIPS: Octeon PCIe: Make hardware and software bus numbers match. MIPS: RBTX4939: Fix IOC pin-enable register updating MIPS: Simplify and correct interrupt handling for MSP4200 ...
2009-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-2.6: parisc: hppb.c - fix printk format strings parisc: parisc-agp.c - use correct page_mask function parisc: sticore.c - check return values parisc: dino.c - check return value of pci_assign_resource() parisc: hp_sdc_mlc.c - check return value of down_trylock() parisc: includecheck fix for ccio-dma.c parisc: Set correct bit in protection flags parisc: isa-eeprom - Fix loff_t usage parisc: fixed faulty check in lba_pci parisc: Fix read buffer overflow in pdc_stable driver parisc: Fix GOT overflow during module load on 64bit kernel
2009-08-04Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Work around compilation warning in arch/x86/kernel/apm_32.c x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq() x86, 32-bit: Fix double accounting in reserve_top_address() x86: Don't use current_cpu_data in x2apic phys_pkg_id x86, UV: Fix UV apic mode x86, UV: Fix macros for accessing large node numbers x86, UV: Delete mapping of MMR rangs mapped by BIOS x86, UV: Handle missing blade-local memory correctly x86: fix assembly constraints in native_save_fl() x86, msr: execute on the correct CPU subset x86: Fix assert syntax in vmlinux.lds.S x86: Make 64-bit efi_ioremap use ioremap on MMIO regions x86: Add quirk to make Apple MacBook5,2 use reboot=pci x86: Fix CPA memtype reserving in the set_pages_array*() cases x86, pat: Fix set_memory_wc related corruption x86: fix section mismatch for i386 init code
2009-08-04x86: Work around compilation warning in arch/x86/kernel/apm_32.cSubrata Modak
The following fix was initially inspired by David Howells fix few days back: http://lkml.org/lkml/2009/7/9/109 However, Ingo disapproves such fixes as it's dangerous (it can hide future, relevant warnings) - in something as performance-uncritical. So, initialize 'err' to '0' to work around a GCC false positive warning: http://lkml.org/lkml/2009/7/18/89 Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com> Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20090721023226.31855.67236.sendpatchset@subratamodak.linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq()Jack Steiner
In uv_setup_irq(), the call to create_irq() initially assigns IRQ vectors to cpu 0. The subsequent call to assign_irq_vector() in arch_enable_uv_irq() migrates the IRQ to another cpu and frees the cpu 0 vector - at least it will be freed as soon as the "IRQ move" completes. arch_enable_uv_irq() needs to send a cleanup IPI to complete the IRQ move. Otherwise, assignment of GRU interrupts on large systems (>200 cpus) will exhaust the cpu 0 interrupt vectors and initialization of the GRU driver will fail. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090720142840.GA8885@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, 32-bit: Fix double accounting in reserve_top_address()Jan Beulich
With VMALLOC_END included in the calculation of MAXMEM (as of 2.6.28) it is no longer correct to also bump __VMALLOC_RESERVE in reserve_top_address(). Doing so results in needlessly small lowmem. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4A71DD2A020000780000D482@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86: Don't use current_cpu_data in x2apic phys_pkg_idYinghai Lu
One system has socket 1 come up as BSP. kexeced kernel reports BSP as: [ 1.524550] Initializing cgroup subsys cpuacct [ 1.536064] initial_apicid:20 [ 1.537135] ht_mask_width:1 [ 1.538128] core_select_mask:f [ 1.539126] core_plus_mask_width:5 [ 1.558479] CPU: Physical Processor ID: 0 [ 1.559501] CPU: Processor Core ID: 0 [ 1.560539] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.579098] CPU: L2 cache: 256K [ 1.580085] CPU: L3 cache: 24576K [ 1.581108] CPU 0/0x20 -> Node 0 [ 1.596193] CPU 0 microcode level: 0xffff0008 It doesn't have correct physical processor id and will get an error: [ 38.840859] CPU0 attaching sched-domain: [ 38.848287] domain 0: span 0,8,72 level SIBLING [ 38.851151] groups: 0 8 72 [ 38.858137] domain 1: span 0,8-15,72-79 level MC [ 38.868944] groups: 0,8,72 9,73 10,74 11,75 12,76 13,77 14,78 15,79 [ 38.881383] ERROR: parent span is not a superset of domain->span [ 38.890724] domain 2: span 0-7,64-71 level CPU [ 38.899237] ERROR: domain->groups does not contain CPU0 [ 38.909229] groups: 8-15,72-79 [ 38.912547] ERROR: groups don't span domain->span [ 38.919665] domain 3: span 0-127 level NODE [ 38.930739] groups: 0-7,64-71 8-15,72-79 16-23,80-87 24-31,88-95 32-39,96-103 40-47,104-111 48-55,112-119 56-63,120-127 it turns out: we can not use current_cpu_data in phys_pgd_id for x2apic. identify_boot_cpu() is called by check_bugs() before smp_prepare_cpus() and till smp_prepare_cpus() current_cpu_data for bsp is assigned with boot_cpu_data. Just make phys_pkg_id for x2apic is aligned to xapic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A6ADD0D.10002@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Fix UV apic modeJack Steiner
Change SGI UV default apicid mode to "physical". This is required to match settings in the UV hub chip. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143856.GA8905@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Fix macros for accessing large node numbersJack Steiner
The UV chipset automatically supplies the upper bits on nodes being referenced by MMR accesses. These bit can be deleted from the hub addressing macros. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20090727143808.GA8076@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Delete mapping of MMR rangs mapped by BIOSJack Steiner
The UV BIOS has added additional MMR ranges that are mapped via EFI virtual mode mappings. These ranges should be deleted from ranges mapped by uv_system_init(). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143656.GA7698@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04x86, UV: Handle missing blade-local memory correctlyJack Steiner
UV blades may not have any blade-local memory. Add a field (nid) to the UV blade structure to indicates whether the node has local memory. This is needed by the GRU driver (pushed separately). Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org LKML-Reference: <20090727143507.GA7006@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-03x86: fix assembly constraints in native_save_fl()H. Peter Anvin
From Gabe Black in bugzilla 13888: native_save_fl is implemented as follows: 11static inline unsigned long native_save_fl(void) 12{ 13 unsigned long flags; 14 15 asm volatile("# __raw_save_flags\n\t" 16 "pushf ; pop %0" 17 : "=g" (flags) 18 : /* no input */ 19 : "memory"); 20 21 return flags; 22} If gcc chooses to put flags on the stack, for instance because this is inlined into a larger function with more register pressure, the offset of the flags variable from the stack pointer will change when the pushf is performed. gcc doesn't attempt to understand that fact, and address used for pop will still be the same. It will write to somewhere near flags on the stack but not actually into it and overwrite some other value. I saw this happen in the ide_device_add_all function when running in a simulator I work on. I'm assuming that some quirk of how the simulated hardware is set up caused the code path this is on to be executed when it normally wouldn't. A simple fix might be to change "=g" to "=r". Reported-by: Gabe Black <spamforgabe@umich.edu> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Stable Team <stable@kernel.org>
2009-08-03x86, msr: execute on the correct CPU subsetBorislav Petkov
Make rdmsr_on_cpus/wrmsr_on_cpus execute on the current CPU only if it is in the supplied bitmask. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Fix assert syntax in vmlinux.lds.SH. Peter Anvin
Older versions of binutils did not accept the naked "ASSERT" syntax; it is considered an expression whose value needs to be assigned to something. Reported-tested-and-fixed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Make 64-bit efi_ioremap use ioremap on MMIO regionsPaul Mackerras
Booting current 64-bit x86 kernels on the latest Apple MacBook (MacBook5,2) via EFI gives the following warning: [ 0.182209] ------------[ cut here ]------------ [ 0.182222] WARNING: at arch/x86/mm/pageattr.c:581 __cpa_process_fault+0x44/0xa0() [ 0.182227] Hardware name: MacBook5,2 [ 0.182231] CPA: called for zero pte. vaddr = ffff8800ffe00000 cpa->vaddr = ffff8800ffe00000 [ 0.182236] Modules linked in: [ 0.182242] Pid: 0, comm: swapper Not tainted 2.6.31-rc4 #6 [ 0.182246] Call Trace: [ 0.182254] [<ffffffff8102c754>] ? __cpa_process_fault+0x44/0xa0 [ 0.182261] [<ffffffff81048668>] warn_slowpath_common+0x78/0xd0 [ 0.182266] [<ffffffff81048744>] warn_slowpath_fmt+0x64/0x70 [ 0.182272] [<ffffffff8102c7ec>] ? update_page_count+0x3c/0x50 [ 0.182280] [<ffffffff818d25c5>] ? phys_pmd_init+0x140/0x22e [ 0.182286] [<ffffffff8102c754>] __cpa_process_fault+0x44/0xa0 [ 0.182292] [<ffffffff8102ce60>] __change_page_attr_set_clr+0x5f0/0xb40 [ 0.182301] [<ffffffff810d1035>] ? vm_unmap_aliases+0x175/0x190 [ 0.182307] [<ffffffff8102d4ae>] change_page_attr_set_clr+0xfe/0x3d0 [ 0.182314] [<ffffffff8102dcca>] _set_memory_uc+0x2a/0x30 [ 0.182319] [<ffffffff8102dd4b>] set_memory_uc+0x7b/0xb0 [ 0.182327] [<ffffffff818afe31>] efi_enter_virtual_mode+0x2ad/0x2c9 [ 0.182334] [<ffffffff818a1c66>] start_kernel+0x2db/0x3f4 [ 0.182340] [<ffffffff818a1289>] x86_64_start_reservations+0x99/0xb9 [ 0.182345] [<ffffffff818a1389>] x86_64_start_kernel+0xe0/0xf2 [ 0.182357] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.182982] init_memory_mapping: 00000000ffffc000-0000000100000000 [ 0.182993] 00ffffc000 - 0100000000 page 4k This happens because the 64-bit version of efi_ioremap calls init_memory_mapping for all addresses, regardless of whether they are RAM or MMIO. The EFI tables on this machine ask for runtime access to some MMIO regions: [ 0.000000] EFI: mem195: type=11, attr=0x8000000000000000, range=[0x0000000093400000-0x0000000093401000) (0MB) [ 0.000000] EFI: mem196: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB) [ 0.000000] EFI: mem197: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB) [ 0.000000] EFI: mem198: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB) [ 0.000000] EFI: mem199: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB) [ 0.000000] EFI: mem200: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB) [ 0.000000] EFI: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB) This arranges to pass the EFI memory type through to efi_ioremap, and makes efi_ioremap use ioremap rather than init_memory_mapping if the type is EFI_MEMORY_MAPPED_IO. With this, the above warning goes away. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.55858.533494.471153@cargo.ozlabs.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Add quirk to make Apple MacBook5,2 use reboot=pciPaul Mackerras
The latest Apple MacBook (MacBook5,2) doesn't reboot successfully under Linux; neither the EFI reboot method nor the default method using the keyboard controller works (the system just hangs and doesn't reset). However, the method using the "PCI reset register" at 0xcf9 does work. This adds a quirk to detect this machine via DMI and force the reboot_type to BOOT_CF9. With this it reboots successfully without requiring a command-line option. Note that the EFI code forces reboot_type to BOOT_EFI when the machine is booted via EFI, but this overrides that since the core_initcall runs after the EFI initialization code. Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19062.56420.501516.316181@cargo.ozlabs.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-03x86: Fix CPA memtype reserving in the set_pages_array*() casesThomas Hellstrom
The code was incorrectly reserving memtypes using the page virtual address instead of the physical address. Furthermore, the code was not ignoring highmem pages as it ought to. ( upstream does not pass in highmem pages yet - but upcoming graphics code will do it and there's no reason to not handle this properly in the CPA APIs.) Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13884 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <stable@kernel.org> Cc: dri-devel@lists.sourceforge.net Cc: venkatesh.pallipadi@intel.com LKML-Reference: <1249284345-7654-1-git-send-email-thellstrom@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-03Merge branch 's3c-fixes-rc4-2' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-08-03MIPS: Wire up accept4 syscall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Delete unused function get_tc_unused().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Fix bogus indentation.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Make various functions static.Ralf Baechle
None of these is used outside the VPE loader. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Free relocation chain on error.Ralf Baechle
This may happen if a bad sequence of relocations is being encountered. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: VPE: Fix compiler warning.Raghu Gandham
Signed-off-by: Raghu Gandham <raghu@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Module: Make error messages unique.Ralf Baechle
There were three different errors resulting in a "dangerous relocation" message. Add the relocation type to the messgages to make them more useful. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Octeon: Run IPI code with interrupts disabled.David Daney
In mm/slab.c the function do_ccupdate_local requires that interrupts be disabled. If they are not, we panic with CONFIG_DEBUG_SLAB. So we disable interrupts while processing IPIs. Also these are not shared irqs, so get rid of the IRQF_SHARED flag. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Jazz: Fix read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MTX-1: Request button GPIO before setting its directionFlorian Fainelli
This patch fixes the following warning at boot time: WARNING: at drivers/gpio/gpiolib.c:83 0x8021d5e0() autorequest GPIO-207 Modules linked in: Call Trace:[<8011e0ec>] 0x8011e0ec [<80110a28>] 0x80110a28 [<80110a28>] 0x80110a28 [..snip..] The current code does not request the GPIO and attempts to set its direction, which is a violation of the GPIO API. This patch also unhardcode the GPIO we request and use the one we defined in the button driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Override CFLAGS with -WerrorFlorian Fainelli
Now that we have removed all warnings from the ar7 board code we can use -Werror like on other MIPS boards. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Remove unused tnetd7200_get_clock functionFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASKFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabledFlorian Fainelli
This patch fixes the following build failure when CONFIG_SERIAL_8250 is not enabled in the kernel configuration: arch/mips/ar7/built-in.o: In function 'ar7_register_devices': platform.c:(.init.text+0x61c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x61c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' platform.c:(.init.text+0x68c): undefined reference to 'early_serial_setup' platform.c:(.init.text+0x68c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup' Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Fix read buffer overflowRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: AR7: Fix build warning on memory.cFlorian Fainelli
This patch fixes the following build warning: arch/mips/ar7/memory.c: In function 'memsize': arch/mips/ar7/memory.c:55: warning: passing argument 1 of 'writel' makes integer from pointer without a cast Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Octeon PCIe: Make hardware and software bus numbers match.David Daney
Some SiliconImage PCIe SATA controlers are not detected when the bus numbers differ. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: RBTX4939: Fix IOC pin-enable register updatingAtsushi Nemoto
The rbtx4939_update_ioc_pen() expects txx9_ce_res[] already initialized. Call it after tx4939_setup(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Simplify and correct interrupt handling for MSP4200Shane McDonald
The current interrupt handling code for the MSP4200 always masks an interrupt before acknowledging it. This is not required, as that will be handled by the level interrupt handler. This change simplifies the MSP4200 code to remove the masking in the ack routine, and makes sure that the minimum required operation is performed for masking and acking, rather than always both masking and acking the interrupt. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MSPxxxx: define MIPS34K_MISSED_ITLB_WAR for other PMC-Sierra SoCFlorian Fainelli
Trying to build a PMC-Sierra MSP4200 VoIP gateway defconfig will not work since MIPS34K_MISSED_ITLB_WAR is not defined for all boards supported within pmc-serria/msp71xx. This patch defines MIPS34K_MISSED_ITLB_WAR to prevent such build failures: CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-mips CC arch/mips/kernel/asm-offsets.s In file included fromlinux-msp71xx/linux-2.6.29/arch/mips/include/asm/bitops.h:24, from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/mips/kernel/asm-offsets.c:13: linux-msp71xx/linux-2.6.29/arch/mips/include/asm/war.h:241:2: error: #error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform This fixes a compile error when building for the MSP4200 boards. Identical patches to fix this were send by Florian Fainelli <florian@openwrt.org> Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: MSP71xx: fix build failures on msp_irq_slp.cFlorian Fainelli
Trying to build MSP4200 VoIP defconfig also fails on msp_irq_slp.c with a non-existing reference to mask_slp_irq, which is in turn mask_msp_slp_irq. Passed that, we will also miss a comma when calling set_irq_chip_and_handler. This patch fixes both issues. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-08-03MIPS: Fix loading of modules with unresolved weak symbolsGabor Juhos
Loading of modules with unresolved weak symbols fails on MIPS since '88173507e4fc1e7ecd111b0565e8cba0cb7dae6d'. Modules: handle symbols that have a zero value The module subsystem cannot handle symbols that are zero. If symbols are present that have a zero value then the module resolver prints out a message that these symbols are unresolved. We have to use IS_ERR_VALUE() to check that a symbol has been resolved or not. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>