aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-10-28powerpc: tracing: Add powerpc tracepoints for interrupt entry and exitAnton Blanchard
This adds powerpc-specific tracepoints for interrupt entry and exit. While we already have generic irq_handler_entry and irq_handler_exit tracepoints there are cases on our virtualised powerpc machines where an interrupt is presented to the OS, but subsequently handled by the hypervisor. This means no OS interrupt handler is invoked. Here is an example on a POWER6 machine with the patch below applied: <idle>-0 [006] 3243.949840744: irq_entry: pt_regs=c0000000ce31fb10 <idle>-0 [006] 3243.949850520: irq_exit: pt_regs=c0000000ce31fb10 <idle>-0 [007] 3243.950218208: irq_entry: pt_regs=c0000000ce323b10 <idle>-0 [007] 3243.950224080: irq_exit: pt_regs=c0000000ce323b10 <idle>-0 [000] 3244.021879320: irq_entry: pt_regs=c000000000a63aa0 <idle>-0 [000] 3244.021883616: irq_handler_entry: irq=87 handler=eth0 <idle>-0 [000] 3244.021887328: irq_handler_exit: irq=87 return=handled <idle>-0 [000] 3244.021897408: irq_exit: pt_regs=c000000000a63aa0 Here we see two phantom interrupts (no handler was invoked), followed by a real interrupt for eth0. Without the tracepoints in this patch we would have missed the phantom interrupts. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Add alignment-faults and emulation-faults software eventsAnton Blanchard
Hook up the alignment-faults and emulation-faults events for powerpc. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: Create PPC_WARN_ALIGNMENT to match PPC_WARN_EMULATEDAnton Blanchard
perf_event wants a separate event for alignment and emulation faults, so create another emulation event. This will make it easy to hook in perf_event at one spot. We pass in regs which will be required for these events. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Enable SDAR in continous sample modeAnton Blanchard
In continuous sampling mode we want the SDAR to update. While we can select between dcache misses and ERAT (L1-TLB) misses, a decent default is to enable both. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Log invalid data addresses as all 1sAnton Blanchard
When we take an exception and the SDAR isn't synchronised we currently log 0 as the address. Unfortunately this is a pretty common value, so use ~0UL instead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-14Merge branch 'topic/x86-lds-nits' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: linker script syntax nits
2009-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: watchdog: Fix rio watchdog probe function sparc64: Set IRQF_DISABLED on LDC channel IRQs. sparc64: Fix D-cache flushing on swapin from SW devices. sparc64: Fix niagara2 perf IRQ bits.
2009-10-14Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] sclp_vt220 build fix [S390] cio: change misleading console logic [S390] call home support: fix proc handler [S390] dasd: use idal for device characteristics [S390] Add highgprs facility to /proc/cpuinfo [S390] dasd: fix locking bug [S390] tape390: Fix request queue handling in block driver [S390] hypfs: Use subcode 6 if subcode 7 is not available
2009-10-14Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix a TRACE_IRQS_OFF typo. sh: Optimize the setup_rt_frame() I-cache flush. sh: Populate initial secondary CPU info from boot_cpu_data. sh: Tidy up SMP cpuinfo. sh: Use boot_cpu_data for FPU tests in sigcontext paths. sh: ftrace: Fix up syscall tracepoint support. sh: force dcache flush if dcache_dirty bit set. sh: update die() output.
2009-10-14Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix missing kernel-doc notation Revert "x86, timers: Check for pending timers after (device) interrupts" sched: Update the clock of runqueue select_task_rq() selected
2009-10-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/paravirt: Use normal calling sequences for irq enable/disable x86: fix kernel panic on 32 bits when profiling x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop x86, vmi: Mark VMI deprecated and schedule it for removal
2009-10-14x86: linker script syntax nitsRoland McGrath
The linker scripts grew some use of weirdly wrong linker script syntax. It happens to work, but it's not what the syntax is documented to be. Clean it up to use the official syntax. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
2009-10-14[S390] Add highgprs facility to /proc/cpuinfoAndreas Krebbel
This patch makes the hwcap bit for the high gprs feature to be visible in /proc/cpuinfo. Signed-off-by: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14[S390] hypfs: Use subcode 6 if subcode 7 is not availableMichael Holzheu
Hypfs never worked on systems that only provide D204 subcode 6. In these cases we nevertheless used subcode 7. With this fix, we use subcode 6, if it is available and the system does not provide subcode 7. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14sh: Fix a TRACE_IRQS_OFF typo.Paul Mundt
The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so never handled the transition properly. This was fixed once before but seems to have made it back in the tree. Fix it for good. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Optimize the setup_rt_frame() I-cache flush.Paul Mundt
This only needs to flush the return code via the legacy path, and just invalidates uselessly otherwise. This makes the behaviour consistent for all of the trampoline setup paths. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Populate initial secondary CPU info from boot_cpu_data.Paul Mundt
The secondary CPU info was seeing corrupted results due to not entering all of the setup paths taken by the boot CPU. So we just memcpy() the boot cpu data over directly, and then fix up the per-CPU bits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Tidy up SMP cpuinfo.Paul Mundt
Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a newline between CPUs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14sh: Use boot_cpu_data for FPU tests in sigcontext paths.Paul Mundt
We do not want to use smp_processor_id() from these paths, as they trip preempt BUGs. Switch the test over to the boot cpu directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13Merge git://git.infradead.org/~dwmw2/iommu-2.6.32Linus Torvalds
* git://git.infradead.org/~dwmw2/iommu-2.6.32: x86: Move pci_iommu_init to rootfs_initcall() Run pci_apply_final_quirks() sooner. Mark pci_apply_final_quirks() __init rather than __devinit Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space intel-iommu: Decode (and ignore) RHSA entries intel-iommu: Make "Unknown DMAR structure" message more informative
2009-10-13sparc64: Set IRQF_DISABLED on LDC channel IRQs.David S. Miller
With lots of virtual devices it's easy to generate a lot of events and chew up the kernel IRQ stack. Reported-by: hyl <heyongli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13x86/paravirt: Use normal calling sequences for irq enable/disableJeremy Fitzhardinge
Bastian Blank reported a boot crash with stackprotector enabled, and debugged it back to edx register corruption. For historical reasons irq enable/disable/save/restore had special calling sequences to make them more efficient. With the more recent introduction of higher-level and more general optimisations this is no longer necessary so we can just use the normal PVOP_ macros. This fixes some residual bugs in the old implementations which left edx liable to inadvertent clobbering. Also, fix some bugs in __PVOP_VCALLEESAVE which were revealed by actual use. Reported-by: Bastian Blank <bastian@waldi.eu.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4AD3BC9B.7040501@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13sh: ftrace: Fix up syscall tracepoint support.Paul Mundt
Sync up with latest core changes in the syscalls tracing area: - tracing: Map syscall name to number (syscall_name_to_nr()) - tracing: Call arch_init_ftrace_syscalls at boot - tracing: add support tracepoint ids (set_syscall_{enter,exit}_id()) Taken from the s390 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13sh: force dcache flush if dcache_dirty bit set.Paul Mundt
This too follows the ARM change, given that the issue at hand applies to all platforms that implement lazy D-cache writeback. This fixes up the case when a page mapping disappears between the flush_dcache_page() call (when PG_dcache_dirty is set for the page) and the update_mmu_cache() call -- such as in the case of swap cache being freed early. This kills off the mapping test in update_mmu_cache() and switches to simply testing for PG_dcache_dirty. Reported-by: Nitin Gupta <ngupta@vflare.org> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13sh: update die() output.Paul Mundt
This follows the ARM change, as SH had all of the same issues: Make die() better match x86: - add printing of the last accessed sysfs file - ensure console_verbose() is called under the lock - ensure we panic outside of oops_exit() Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-12x86: fix kernel panic on 32 bits when profilingH. Peter Anvin
Latest kernel has a kernel panic in booting on i386 machine when profile=2 setting in cmdline. It is due to 'sp' being incorrect in profile_pc(). BUG: unable to handle kernel NULL pointer dereference at 00000246 IP: [<c01288b6>] profile_pc+0x2a/0x48 *pde = 00000000 Oops: 0000 [#1] SMP This differs from the original version by Alex Shi in that we use the kernel_stack_pointer() inline already defined in <asm/ptrace.h> for this purpose, instead of #ifdef. Originally-by: Alex Shi <alex.shi@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-12ARM: force dcache flush if dcache_dirty bit setNitin Gupta
On ARM, update_mmu_cache() does dcache flush for a page only if it has a kernel mapping (page_mapping(page) != NULL). The correct behavior would be to force the flush based on dcache_dirty bit only. One of the cases where present logic would be a problem is when a RAM based block device[1] is used as a swap disk. In this case, we would have in-memory data corruption as shown in steps below: do_swap_page() { - Allocate a new page (if not already in swap cache) - Issue read from swap disk - Block driver issues flush_dcache_page() - flush_dcache_page() simply sets PG_dcache_dirty bit and does not actually issue a flush since this page has no user space mapping yet. - Now, if swap disk is almost full, this newly read page is removed from swap cache and corrsponding swap slot is freed. - Map this page anonymously in user space. - update_mmu_cache() - Since this page does not have kernel mapping (its not in page/swap cache and is mapped anonymously), it does not issue dcache flush even if dcache_dirty bit is set by flush_dcache_page() above. <user now gets stale data since dcache was never flushed> } Same problem exists on mips too. [1] example: - brd (RAM based block device) - ramzswap (RAM based compressed swap device) Signed-off-by: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-12x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptopJan Beulich
Move the trampoline and accessors back out of .cpuinit.* for the case of 64-bits+ACPI_SLEEP. This solves s2ram hangs reported in: http://bugzilla.kernel.org/show_bug.cgi?id=14279 Reported-and-bisected-by: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <bugzilla-daemon@bugzilla.kernel.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12x86: Move pci_iommu_init to rootfs_initcall()David Woodhouse
We want this to happen after the PCI quirks, which are now running at the very end of the fs_initcalls. This works around the BIOS problems which were originally addressed by commit db8be50c4307dac2b37305fc59c8dc0f978d09ea ('USB: Work around BIOS bugs by quiescing USB controllers earlier'), which was reverted in commit d93a8f829fe1d2f3002f2c6ddb553d12db420412. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-10-12sparc64: Fix D-cache flushing on swapin from SW devices.David S. Miller
Thanks to tip form ARM folks and Russell King. If flush_dcache_page() occurs on a swapin it will have a mapping and we'll try to defer the flush by setting the dirty bit. But when it hits update_dcache_page() we won't flush because the page won't have a mapping any more. So remove the mapping requirement in flush_dcache(). Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12[ARM] pxa: workaround errata #37 by not using half turbo switchingDennis O'Brien
PXA27x Errata #37 implies system will hang when switching into or out of half turbo (HT bit in CLKCFG) mode, workaround this by not using it. Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Cc: stable-2.6.31 <stable@kernel.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12[ARM] pxa/csb726: adjust duplicate structure field initializationJulia Lawall
Currently the irq_type field of the csb726_lan_config structure is initialized twice. The value in the first case, SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity field, so I have renamed the field in the first initialization to that. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-11pci: increase alignment to make more space for hidden codeYinghai Lu
As reported in http://bugzilla.kernel.org/show_bug.cgi?id=13940 on some system when acpi are enabled, acpi clears some BAR for some devices without reason, and kernel will need to allocate devices for them. It then apparently hits some undocumented resource conflict, resulting in non-working devices. Try to increase alignment to get more safe range for unassigned devices. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits) [S390] dasd: fix race condition in resume code [S390] Add EX_TABLE for addressing exception in usercopy functions. [S390] 64-bit register support for 31-bit processes [S390] hibernate: Use correct place for CPU address in lowcore [S390] pm: ignore time spend in suspended state [S390] zcrypt: Improve some comments [S390] zcrypt: Fix sparse warning. [S390] perf_counter: fix vdso detection [S390] ftrace: drop nmi protection [S390] compat: fix truncate system call wrapper [S390] Provide arch specific mdelay implementation. [S390] Fix enabled udelay for short delays. [S390] cio: allow setting boxed devices offline [S390] cio: make not operational handling consistent [S390] cio: make disconnected handling consistent [S390] Fix memory leak in /proc/cio_ignore [S390] cio: channel path memory leak [S390] module: fix memory leak in s390 module loader [S390] Enable kmemleak on s390. [S390] 3270 console build fix ...
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11ARM: Add kmap_atomic type debuggingRussell King
Seemingly this support was missed when highmem was added, so DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: boolean bit testingJohannes Weiner
Bit testing (test, testset, testclear, testchange) for bit numbers known at compile time returns a word with the tested-for bit set. Change it to return a true boolean value so to make it consistent with the out-of-line path and all the other bitops implementations. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: update die() outputRussell King
Make die() better match x86: - add printing of the last accessed sysfs file - ensure console_verbose() is called under the lock - ensure we panic outside of oops_exit() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: Dump code/mem oops lines with the appropriate log levelRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: Dump memory and backtrace as one printk per lineRussell King
dump_mem and dump_backtrace were both using multiple printk statements to print each line. With DEBUG_LL enabled, this causes OOPS to become very difficult to read. Solve this by only using one printk per line. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10ARM: 5756/1: ep93xx: introduce clk parentHartley Sweeten
The clock generation system in the ep93xx uses two external oscillator's and two internal PLLs to derive all the internal clocks. Many of these internal clocks can be stopped to save power. This introduces a "parent" hierarchy for the clocks so that the users count can be correctly tracked for power management. The "parent" for the video clock can either be one of the PLL outputs or the external oscillator. In order to correctly track the "parent" for the video clock calc_clk_div() needed to be modified. It now returns an error code if the desired rate cannot be generated. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10ARM: 5754/1: ep93xx: update i2c supportHartley Sweeten
Update the ep93xx i2c support: 1) The platform init code passes the configuration data for the i2c-gpio driver. This allows any gpio pin do be used for the sda and scl pins. It also allows the platform to specify the udelay and timeout. 2) Program the gpio configuration register to enable/disable the open drain drivers. Note that this really only works if the sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and EP93XX_GPIO_LINE_EECLK. 3) Update the edb93xx.c platform init to use the new support. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* definesHartley Sweeten
Most of the EP93XX_GPIO_*_INT_* register defines in ep93xx-regs.h not required due to how the ep93xx core and gpiolib support handle gpio interrupts. Remove the defines to prevent future confusion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - print debug data when testing AUX IRQ delivery Input: libps2 - fix dependancy on i8042 Input: fix rx51 board keymap Input: ad7879 - pass up error codes from probe functions Input: xpad - add BigBen Interactive XBOX 360 Controller Input: rotary_encoder - fix relative axis support Input: sparkspkr - move remove() functions to .devexit.text Input: wistron_btns - add DMI entry for Medion WIM2030 laptop
2009-10-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ Blackfin: drop all simple-gpio board resources Blackfin: fix framebuffer mmap bug for nommu Blackfin: includecheck fix: mach-bf548, ezkit.c Blackfin: drop cs_change_per_word setting Blackfin: bf533-ezkit: convert to physmap/jedec_probe Blackfin: convert adv7393 resources to new i2c framework Blackfin: fix missed cache config renames Blackfin: cplbinfo: drop d_path() hacks Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines Blackfin: BF51x: add PTP MMR defines Blackfin: mass clean up of copyright/licensing info Blackfin: convert to use arch_gettimeoffset()
2009-10-09Merge branch 'sh/for-2.6.32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Don't allocate smaller sized mappings on every iteration sh: Try PMB mapping based on physical address, not mapping size sh: Plug PMB alloc memory leak sh: Sprinkle __uses_jump_to_uncached sh: enable sleep state LEDs on Ecovec24 usb: r8a66597-udc unaligned fifo fix sh: mach-ecovec24: Document DS2 switch settings. sh: Build fix: export __movmem sh: Disable unaligned kernel access printks by default. sh: mach-ecovec24: modify 1st MTD area to read only sh: mach-ecovec24: Add TouchScreen support sh: magicpanelr2 and dreamcast can use the generic I/O base. sh: Don't enable interrupts in the page fault path sh: Set the default I/O port base to P2SEG. sh: Handle ioport_map() cases for >= P1SEG addresses.
2009-10-09Revert "x86, timers: Check for pending timers after (device) interrupts"Ingo Molnar
This reverts commit 9bcbdd9c58617f1301dd4f17c738bb9bc73aca70. The real bug producing LatencyTop latencies has been fixed in: f5dc375: sched: Update the clock of runqueue select_task_rq() selected And the commit being reverted here triggers local timer processing from every device IRQ. If device IRQs come in at a high frequency, this could cause a performance regression. The commit being reverted here purely 'fixed' the reported latency as a side effect, because CPUs were being moved out of idle more often. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Frans Pop <elendil@planet.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091008064041.67219b13@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-09sparc64: Fix niagara2 perf IRQ bits.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09sh: Don't allocate smaller sized mappings on every iterationMatt Fleming
Currently, we've got the less than ideal situation where if we need to allocate a 256MB mapping we'll allocate four entries like so, entry 1: 128MB entry 2: 64MB entry 3: 16MB entry 4: 16MB This is because as we execute the loop in pmb_remap() we will progressively try mapping the remaining address space with smaller and smaller sizes. This isn't good because the size we use on one iteration may be the perfect size to use on the next iteration, for instance when the initial size is divisible by one of the PMB mapping sizes. With this patch, we now only need two entries in the PMB to map 256MB of address space, entry 1: 128MB entry 2: 128MB Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 17:43:11 +0000