aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-04-07[SCSI] simscsi: use sg buffer copy helper funcitonsFUJITA Tomonori
This replaces simscsi_fillresult with scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix user accesses in regset code. [SPARC64]: Fix FPU saving in 64-bit signal handling.
2008-04-06Fix booting pentium+ with dodgy TSCRusty Russell
We handle a broken tsc these days, so no need to panic. We clear the TSC bit when tsc_init decides it's unreliable (eg. under lguest w/ bad host TSC), leading to bogus panic. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04Merge branch 'upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ralf/upstream-linus * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/upstream-linus: [MIPS] Make KGDB compile on UP [MIPS] Pb1200: Fix header breakage
2008-04-04[MIPS] Make KGDB compile on UPSergei Shtylyov
Building UP kernel with KGDB enabled produces the following errors and warning (fatal due to -Werror in arch/mips/kernel/Makefile): In file included from arch/mips/kernel/gdb-stub.c:142: include/asm/smp.h:25:1: "raw_smp_processor_id" redefined In file included from include/linux/sched.h:69, from arch/mips/kernel/gdb-stub.c:126: include/linux/smp.h:88:1: this is the location of the previous definition In file included from arch/mips/kernel/gdb-stub.c:142: include/asm/smp.h:62: error: redefinition of 'smp_send_reschedule' include/linux/smp.h:102: error: previous definition of 'smp_send_reschedule' was here include/asm/smp.h: In function `smp_send_reschedule': include/asm/smp.h:65: error: dereferencing pointer to incomplete type arch/mips/kernel/gdb-stub.c: At top level: arch/mips/kernel/gdb-stub.c:660: warning: 'kgdb_wait' defined but not used Fix the errors by not directly including <asm/smp.h> (which is already included by <linux/smp.h>) and the warning by enclosing kgdb_wait() in #ifdef CONFIG_SMP. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: revert assign IRQs to hpet timer x86: tsc prevent time going backwards xen: Clear PG_pinned in release_{pt,pd}() xen: Do not pin/unpin PMD pages xen: refactor xen_{alloc,release}_{pt,pd}() x86, agpgart: scary messages are fortunately obsolete xen: fix grant table bug x86: fix breakage of vSMP irq operations x86: print message if nmi_watchdog=2 cannot be enabled x86: fix nmi_watchdog=2 on Pentium-D CPUs
2008-04-04m68k: update defconfigs for 2.6.25Geert Uytterhoeven
Long overdue update of the m68k defconfigs Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04m68k: use KBUILD_DEFCONFIGAdrian Bunk
The default defconfig should be one from arch/m68k/configs/ arch/m68k/defconfig was not exactly identical to amiga_defconfig but also considering how long they have been without any update that doesn't seem to have been on purpose. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04x86: revert assign IRQs to hpet timerThomas Gleixner
The commits: commit 37a47db8d7f0f38dac5acf5a13abbc8f401707fa Author: Balaji Rao <balajirrao@gmail.com> Date: Wed Jan 30 13:30:03 2008 +0100 x86: assign IRQs to HPET timers, fix and commit e3f37a54f690d3e64995ea7ecea08c5ab3070faf Author: Balaji Rao <balajirrao@gmail.com> Date: Wed Jan 30 13:30:03 2008 +0100 x86: assign IRQs to HPET timers have been identified to cause a regression on some platforms due to the assignement of legacy IRQs which makes the legacy devices connected to those IRQs disfunctional. Revert them. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10382 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04x86: tsc prevent time going backwardsThomas Gleixner
We already catch most of the TSC problems by sanity checks, but there is a subtle bug which has been in the code for ever. This can cause time jumps in the range of hours. This was reported in: http://lkml.org/lkml/2007/8/23/96 and http://lkml.org/lkml/2008/3/31/23 I was able to reproduce the problem with a gettimeofday loop test on a dual core and a quad core machine which both have sychronized TSCs. The TSCs seems not to be perfectly in sync though, but the kernel is not able to detect the slight delta in the sync check. Still there exists an extremly small window where this delta can be observed with a real big time jump. So far I was only able to reproduce this with the vsyscall gettimeofday implementation, but in theory this might be observable with the syscall based version as well. CPU 0 updates the clock source variables under xtime/vyscall lock and CPU1, where the TSC is slighty behind CPU0, is reading the time right after the seqlock was unlocked. The clocksource reference data was updated with the TSC from CPU0 and the value which is read from TSC on CPU1 is less than the reference data. This results in a huge delta value due to the unsigned subtraction of the TSC value and the reference value. This algorithm can not be changed due to the support of wrapping clock sources like pm timer. The huge delta is converted to nanoseconds and added to xtime, which is then observable by the caller. The next gettimeofday call on CPU1 will show the correct time again as now the TSC has advanced above the reference value. To prevent this TSC specific wreckage we need to compare the TSC value against the reference value and return the latter when it is larger than the actual TSC value. I pondered to mark the TSC unstable when the readout is smaller than the reference value, but this would render an otherwise good and fast clocksource unusable without a real good reason. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04xen: Clear PG_pinned in release_{pt,pd}()Mark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin <markmc@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04xen: Do not pin/unpin PMD pagesMark McLoughlin
i.e. with this simple test case: int fd = open("/dev/zero", O_RDONLY); munmap(mmap((void *)0x40000000, 0x1000_LEN, PROT_READ, MAP_PRIVATE, fd, 0), 0x1000); close(fd); we currently get: kernel BUG at arch/x86/xen/enlighten.c:678! ... EIP is at xen_release_pt+0x79/0xa9 ... Call Trace: [<c041da25>] ? __pmd_free_tlb+0x1a/0x75 [<c047a192>] ? free_pgd_range+0x1d2/0x2b5 [<c047a2f3>] ? free_pgtables+0x7e/0x93 [<c047b272>] ? unmap_region+0xb9/0xf5 [<c047c1bd>] ? do_munmap+0x193/0x1f5 [<c047c24f>] ? sys_munmap+0x30/0x3f [<c0408cce>] ? syscall_call+0x7/0xb ======================= and xen complains: (XEN) mm.c:2241:d4 Mfn 1cc37 not pinned Further details at: https://bugzilla.redhat.com/436453 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin <markmc@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04xen: refactor xen_{alloc,release}_{pt,pd}()Mark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin <markmc@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04x86, agpgart: scary messages are fortunately obsoletePavel Machek
Fix obsolete printks in aperture-64. We used not to handle missing agpgart, but we handle it okay now. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04x86: print message if nmi_watchdog=2 cannot be enabledIngo Molnar
right now if there's no CPU support for nmi_watchdog=2 we'll just refuse it silently. print a useful warning. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04x86: fix nmi_watchdog=2 on Pentium-D CPUsIngo Molnar
implement nmi_watchdog=2 on this class of CPUs: cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 3.00GHz the watchdog's ->setup() method is safe anyway, so if the CPU cannot support it we'll bail out safely. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-03[SPARC64]: Fix user accesses in regset code.David S. Miller
If target is not current we need to use access_process_vm(). Noticed by Roland McGrath. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03x86 ptrace: avoid unnecessary wrmsrRoland McGrath
This avoids using wrmsr on MSR_IA32_DEBUGCTLMSR when it's not needed. No wrmsr ever needs to be done if noone has ever used block stepping. Without this change, using ptrace on 2.6.25 on an x86 KVM guest will tickle KVM's missing support for the MSR and crash the guest kernel. Though host KVM is the buggy one, this makes for a regression in the guest behavior from 2.6.24->2.6.25 that we can easily avoid. I also corrected some bad whitespace. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-03Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works [POWERPC] mpc5200: Amalgamated DTS fixes and updates [POWERPC] Fix rtas_flash procfs interface [POWERPC] Fix deadlock with mmu_hash_lock in hash_page_sync [POWERPC] Fix iSeries hard irq enabling regression [POWERPC] Fix CPM2 SCC1 clock initialization. [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB [POWERPC] fsldma: Use compatiable binding as spec [POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata [POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigs [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts
2008-04-03[SPARC64]: Fix FPU saving in 64-bit signal handling.David S. Miller
The calculation of the FPU reg save area pointer was wrong. Based upon an OOPS report from Tom Callaway. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03[POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet worksRené Bürgel
This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] mpc5200: Amalgamated DTS fixes and updatesBartlomiej Sieka
DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix rtas_flash procfs interfaceMaxim Shchetynin
Handling of the proc_dir_entry->count was changed in 2.6.24-rc5. After this change, the default value for pde->count is 1 and not 0 as before. Therefore, if we want to check whether our procfs file is already opened (already in use), we have to check if pde->count is greater than 2 rather than 1. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix deadlock with mmu_hash_lock in hash_page_syncBenjamin Herrenschmidt
hash_page_sync() takes and releases the low level mmu hash lock in order to sync with other processors disposing of page tables. Because that lock can be needed to service hash misses triggered by interrupt handlers, taking it must be done with interrupts off. However, hash_page_sync() appears to be called with interrupts enabled, thus causing occasional deadlocks. We fix it by making sure hash_page_sync() masks interrupts while holding the lock. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix iSeries hard irq enabling regressionBenjamin Herrenschmidt
A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03[POWERPC] Fix CPM2 SCC1 clock initialization.Laurent Pinchart
A missing break statement in a switch caused cpm2_clk_setup() to initialize SCC2 instead of SCC1. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-02vmcoreinfo: add the symbol "phys_base"Ken'ichi Ohmichi
Fix the problem that makedumpfile sometimes fails on x86_64 machine. This patch adds the symbol "phys_base" to a vmcoreinfo data. The vmcoreinfo data has the minimum debugging information only for dump filtering. makedumpfile (dump filtering command) gets it to distinguish unnecessary pages, and makedumpfile creates a small dumpfile. On x86_64 kernel which compiled with CONFIG_PHYSICAL_START=0x0 and CONFIG_RELOCATABLE=y, makedumpfile fails like the following: # makedumpfile -d31 /proc/vmcore dumpfile The kernel version is not supported. The created dumpfile may be incomplete. _exclude_free_page: Can't get next online node. makedumpfile Failed. # The cause is the lack of the symbol "phys_base" in a vmcoreinfo data. If the symbol "phys_base" does not exist, makedumpfile considers an x86_64 kernel as non relocatable. As the result, makedumpfile misunderstands the physical address where the kernel is loaded, and it cannot translate a kernel virtual address to physical address correctly. To fix this problem, this patch adds the symbol "phys_base" to a vmcoreinfo data. Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02alpha: fix ALSA DMA mmap crashIvan Kokshaysky
Make dma_alloc_coherent respect gfp flags (__GFP_COMP is one that matters). Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: remove unused calc_npages() in iommu_common.h sparc64: add the segment boundary checking to IOMMUs while merging SG entries [SPARC64]: Don't open-code {get,put}_cpu_var() in flush_tlb_pending().
2008-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Fix up uImage compression type remove include/asm-sh/floppy.h sh: Fix TIF_USEDFPU clearing under FPU emulation. sh: Fix occasional FPU register corruption under preempt.
2008-04-01Merge branch 'upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ralf/upstream-linus * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/upstream-linus: [MIPS] XSS1500: Fix compilation [MIPS] Bigsur: make defconfig more useful. [MIPS] Alchemy: work around clock misdetection on early Au1000 [MIPS] Add missing 4KEC TLB refill handler [MIPS] BCM1480: Fix PCI/HT IO access [MIPS] Fix the installation condition of MIPS clocksource [MIPS] Check for GCC r10k-cache-barrier support [MIPS] I8253: Export i2853_lock to modules. [MIPS] VPE loader: Check result of memory allocation.
2008-04-01Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4875/1: Add MODULE_ALIAS to ixp4xx-beeper module [ARM] 4873/1: Fix ITE 8152 interrupt demux [ARM] 4878/1: Add oabi shim for fstatat64
2008-04-01[MIPS] XSS1500: Fix compilationFlorian Fainelli
This patch fixes the compilation of the Au1000 XSS1500 board setup and irqmap code. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Bigsur: make defconfig more useful.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Alchemy: work around clock misdetection on early Au1000Sergei Shtylyov
Work around the CPU clock miscalculation on Au1000DA/HA/HB due the sys_cpupll register being write-only, i.e. actually do what the comment before cal_r4off() function advertised for years but the code failed at. This is achieved by just giving user a chance to define the clock explicitly in the board config. via CONFIG_SOC_AU1000_FREQUENCY option, defaulting to 396 MHz if the option is not given... The patch is based on the AMD's big unpublished patch, the issue seems to be an undocumented errata (or feature :-)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Add missing 4KEC TLB refill handlerThomas Bogendoerfer
Early 4KEc were MIPS32r1 and therefore need some love to get a TLB refill handler. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] BCM1480: Fix PCI/HT IO accessThomas Bogendoerfer
- removed check for enable HT-PCI bridges, because some CFE version init only the needed one and scanning works even with disabled HT links - implemented I/O access behind HT PCI busses - fixed pci_map for IO resource behind PCI bridge Tested with E100 and Tulip driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Fix the installation condition of MIPS clocksourceYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] Check for GCC r10k-cache-barrier supportThomas Bogendoerfer
Check whether gcc supports -mr10-cache-barrier=1 and issue a cleaner error message if not. This option is needed to build working SGI IP28 kernels. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] I8253: Export i2853_lock to modules.Ralf Baechle
This fixes: ERROR: "i8253_lock" [drivers/input/misc/pcspkr.ko] undefined! Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01[MIPS] VPE loader: Check result of memory allocation.Ralf Baechle
And while at it, make it a little cleaner. Issue originally reported by Tiejun Chen (tiejun.chen@windriver.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-31[POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIBKumar Gala
The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sataKim Phillips
as prescribed in Documentation/powerpc/booting-without-of.txt. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigsKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dtsAnton Vorontsov
Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. This patch fixes USB malfunctioning on the MPC837xE-RDB boards. Similar patch has been already applied for the MDS boards: commit 28b958859206b7010d03129611c2e444898e3ee4 Author: Li Yang <leoli@freescale.com> Date: Thu Mar 6 18:42:26 2008 +0800 [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31sh: Fix up uImage compression typeYoshihiro Shimoda
Fix up uImage compression type. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-31remove include/asm-sh/floppy.hAdrian Bunk
This patch removes the unused include/asm-sh/floppy.h (ARCH_MAY_HAVE_PC_FDC was not enabled). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-30powerpc/pseries/xcis: ansifyAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30vma_map: use proper pointer typesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28sparc64: remove unused calc_npages() in iommu_common.hFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 02:58:21 +0000