aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-04-18RealView: Base support for the PB11MPCore platformBahadir Balban
This patch adds the base files for the PB11MPCore platform support. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Allow ARMv7 support for RealView/EBCatalin Marinas
This patch changes the CPU_V7 configuration dependency to allow MACH_REALVIEW_EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move more device address definitions to board-eb.hCatalin Marinas
The upcoming PB11MPCore and PB1176 have different memory maps and some of the definitions in platform.h are no longer common. This patch moves them to the board-eb.h file and updates their usage in realview_eb.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the UART definitions to EB specific filesCatalin Marinas
Since the PB1176 has different UART base addresses, this patch moves the definitions form platorm.h to board-eb.h. It also modifies uncompress.h to detect the platform type at run-time. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the timer definitions into the EB specific filesCatalin Marinas
This patch moves the timer definitions from platform.h into board-eb.h as they are different on PB11MPCore and PB1176. It also adds timerX_va_base variables in core.c which are set by the realview_eb_timer_init function before invoking realview_timer_init. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the flash definitions out of platform.hCatalin Marinas
This patch moves the patch definitions into board-eb.h and realview_eb.c (from core.c) as they are different on the PB11MPCore and PB1176 platforms. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the EB GIC definitions to the board fileCatalin Marinas
This is in preparation for the RealView PB11MPCore and PB1176 patches which have different base addresses for the GIC. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Add RealView/EB support for the LAN9118 Ethernet chipCatalin Marinas
RealView/EB revD platform comes with the SMSC LAN9118 Ethernet chip. This patch allows either the smc91x or the smc911x drivers to be used with the RealView/EB platform. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the SCU initialisation out of __v6_setupCatalin Marinas
This patch moves the SCU initialisation from __v6_setup to the smp_prepare_cpus() function as it relies on platform-specific settings. Changes to get_core_count() are mainly for allowing cleaner code with the upcoming PB11MPCore patches. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Linux Thumb-2 support for user-space applicationsPaul Brook
This patch implements Thumb-2 application support in Linux. Original implementation by Paul Brook with fixes for VFP and Neon by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Add a prefetch abort handlerPaul Brook
This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18ARMv7: Add support for the ThumbEE state saving/restoringCatalin Marinas
This patch adds the detection and handling of the ThumbEE extension on ARMv7 CPUs. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-03-25KVM: MMU: Fix memory leak on guest demand faultsAvi Kivity
While backporting 72dc67a69690288538142df73a7e3ac66fea68dc, a gfn_to_page() call was duplicated instead of moved (due to an unrelated patch not being present in mainline). This caused a page reference leak, resulting in a fairly massive memory leak. Fix by removing the extraneous gfn_to_page() call. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: convert init_rmode_tss() to slots_lockMarcelo Tosatti
init_rmode_tss was forgotten during the conversion from mmap_sem to slots_lock. INFO: task qemu-system-x86:3748 blocked for more than 120 seconds. Call Trace: [<ffffffff8053d100>] __down_read+0x86/0x9e [<ffffffff8053fb43>] do_page_fault+0x346/0x78e [<ffffffff8053d235>] trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8053dcad>] error_exit+0x0/0xa9 [<ffffffff8035a7a7>] copy_user_generic_string+0x17/0x40 [<ffffffff88099a8a>] :kvm:kvm_write_guest_page+0x3e/0x5f [<ffffffff880b661a>] :kvm_intel:init_rmode_tss+0xa7/0xf9 [<ffffffff880b7d7e>] :kvm_intel:vmx_vcpu_reset+0x10/0x38a [<ffffffff8809b9a5>] :kvm:kvm_arch_vcpu_setup+0x20/0x53 [<ffffffff8809a1e4>] :kvm:kvm_vm_ioctl+0xad/0x1cf [<ffffffff80249dea>] __lock_acquire+0x4f7/0xc28 [<ffffffff8028fad9>] vfs_ioctl+0x21/0x6b [<ffffffff8028fd75>] do_vfs_ioctl+0x252/0x26b [<ffffffff8028fdca>] sys_ioctl+0x3c/0x5e [<ffffffff8020b01b>] system_call_after_swapgs+0x7b/0x80 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: handle page removal with shadow mappingMarcelo Tosatti
Do not assume that a shadow mapping will always point to the same host frame number. Fixes crash with madvise(MADV_DONTNEED). [avi: move after first printk(), add another printk()] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: Fix is_rmap_pte() with io ptesAvi Kivity
is_rmap_pte() doesn't take into account io ptes, which have the avail bit set. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: Restore tss even on x86_64Avi Kivity
The vmx hardware state restore restores the tss selector and base address, but not its length. Usually, this does not matter since most of the tss contents is within the default length of 0x67. However, if a process is using ioperm() to grant itself I/O port permissions, an additional bitmap within the tss, but outside the default length is consulted. The effect is that the process will receive a SIGSEGV instead of transparently accessing the port. Fix by restoring the tss length. Note that i386 had this working already. Closes bugzilla 10246. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25Merge branch 'linux-2.6' into mergePaul Mackerras
2008-03-25[POWERPC] mpc5200: Fix incorrect compatible string for the mdio nodeGrant Likely
The MDIO node in the lite5200b.dts file needs to also claim compatibility with the older mpc5200 chip. Otherwise the driver won't find the device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix Oops with TQM5200 on TQM5200 [POWERPC] mpc5200: Fix null dereference if bestcomm fails to initialize [POWERPC] mpc5200-fec: Fix possible NULL dereference in mdio driver [POWERPC] Fix crash in init_ipic_sysfs on efika [POWERPC] Don't use 64k pages for ioremap on pSeries
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: exec PT_DTRACE [SPARC64]: Use shorter list_splice_init() for brevity. [SPARC64]: Remove most limitations to kernel image size.
2008-03-24x86-32: Pass the full resource data to ioremap()Linus Torvalds
It appears that 64-bit PCI resources cannot possibly ever have worked on x86-32 even when the RESOURCES_64BIT config option was set, because any driver that tried to [pci_]ioremap() the resource would have been unable to do so because the high 32 bits would have been silently dropped on the floor by the ioremap() routines that only used "unsigned long". Change them to use "resource_size_t" instead, which properly encodes the whole 64-bit resource data if RESOURCES_64BIT is enabled. Acked-by: H. Peter Anvin <hpa@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24[POWERPC] Update some defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-24[POWERPC] Fix Oops with TQM5200 on TQM5200Anatolij Gustschin
The "bestcomm-core" driver defines its of_match table as follows static struct of_device_id mpc52xx_bcom_of_match[] = { { .type = "dma-controller", .compatible = "fsl,mpc5200-bestcomm", }, { .type = "dma-controller", .compatible = "mpc5200-bestcomm", }, {}, }; so while registering the driver, the driver's probe function won't be called, because the device tree node doesn't have a device_type property. Thus the driver's bcom_engine structure won't be allocated. Referencing this structure later causes observed Oops. Checking bcom_eng pointer for NULL before referencing data pointed by it prevents oopsing, but fec driver still doesn't work (because of the lost bestcomm match and resulted task allocation failure). Actually the compatible property exists and should match and so the fec driver should work. This removes .type = "dma-controller" from the bestcomm driver's mpc52xx_bcom_of_match table to solve the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] mpc5200: Fix null dereference if bestcomm fails to initializeGrant Likely
If the bestcomm initialization fails, calls to the task allocate function should fail gracefully instead of oopsing with a NULL deref. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] Fix crash in init_ipic_sysfs on efikaOlaf Hering
The global primary_ipic in arch/powerpc/sysdev/ipic.c can remain NULL if ipic_init() fails, which will happen on machines that don't have an ipic interrupt controller. init_ipic_sysfs() will crash in that case. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24[POWERPC] Don't use 64k pages for ioremap on pSeriesPaul Mackerras
On pSeries, the hypervisor doesn't let us map in the eHEA ethernet adapter using 64k pages, and thus the ehea driver will fail if 64k pages are configured. This works around the problem by always using 4k pages for ioremap on pSeries (but not on other platforms). A better fix would be to check whether the partition could ever have an eHEA adapter, and only force 4k pages if it could, but this will do for 2.6.25. This is based on an earlier patch by Tony Breeds. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-23[SPARC64]: exec PT_DTRACERoland McGrath
The PT_DTRACE flag is meaningless and obsolete. Don't touch it. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-23[SPARC64]: Use shorter list_splice_init() for brevity.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-22x86: revert: reserve dma32 early for gartThomas Gleixner
Revert commit f62f1fc9ef94f74fda2b456d935ba2da69fa0a40 Author: Yinghai Lu <yhlu.kernel@gmail.com> Date: Fri Mar 7 15:02:50 2008 -0800 x86: reserve dma32 early for gart The patch has a dependency on bootmem modifications which are not .25 material that late in the -rc cycle. The problem which is addressed by the patch is limited to machines with 256G and more memory booted with NUMA disabled. This is not a .25 regression and the audience which is affected by this problem is very limited, so it's safer to do the revert than pulling in intrusive bootmem changes right now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21[SPARC64]: Remove most limitations to kernel image size.David S. Miller
Currently kernel images are limited to 8MB in size, and this causes problems especially when enabling features that take up a lot of kernel image space such as lockdep. The code now will align the kernel image size up to 4MB and map that many locked TLB entries. So, the only practical limitation is the number of available locked TLB entries which is 16 on Cheetah and 64 on pre-Cheetah sparc64 cpus. Niagara cpus don't actually have hw locked TLB entry support. Rather, the hypervisor transparently provides support for "locked" TLB entries since it runs with physical addressing and does the initial TLB miss processing. Fully utilizing this change requires some help from SILO, a patch for which will be submitted to the maintainer. Essentially, SILO will only currently map up to 8MB for the kernel image and that needs to be increased. Note that neither this patch nor the SILO bits will help with network booting. The openfirmware code will only map up to a certain amount of kernel image during a network boot and there isn't much we can to about that other than to implemented a layered network booting facility. Solaris has this, and calls it "wanboot" and we may implement something similar at some point. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-21x86_64: free_bootmem should take physYinghai Lu
so use nodedata_phys directly. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: trim mtrr don't close gap for resource allocation.Yinghai Lu
fix the bug reported here: http://bugzilla.kernel.org/show_bug.cgi?id=10232 use update_memory_range() instead of add_memory_range() directly to avoid closing the gap. ( the new code only affects and runs on systems where the MTRR workaround triggers. ) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix reboot problem with Dell Optiplex 745, 0KW626 boardHeinz-Ado Arnolds
we have seen a little problem in rebooting Dell Optiplex 745 with the 0KW626 board. Here is a small patch enabling reboot with this board, which forces the default reboot path it into the BIOS reboot mode. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix fault_msg nul terminationJiri Slaby
The fault_msg text is not explictly nul terminated now in startup assembly. Do so by converting .ascii to .asciz. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix long standing bug with usb after hibernation with 4GB ramPavel Machek
aperture_64.c takes a piece of memory and makes it into iommu window... but such window may not be saved by swsusp -- that leads to oops during hibernation. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: hpet clock enable quirk on nVidia nForce 430Zbigniew Luszpinski
this patch allows hpet=force on nVidia nForce 430 southbridge. This patch was tested by me on my old Asus A8N-VM CSM (where bios does not support hpet and does not advertise it via acpi entry). My nForce430 version: lspci -nn | grep LPC 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Kernel 2.6.24.3 after patching and using hpet=force reports this: dmesg | grep -i hpet Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap vt.default_utf8=0 hpet=force Force enabled HPET at base address 0xfed00000 hpet clockevent registered Time: hpet clocksource has been installed. grep -i hpet /proc/timer_list Clock Event Device: hpet set_next_event: hpet_legacy_next_event set_mode: hpet_legacy_set_mode grep Clock /proc/timer_list (before patching) Clock Event Device: pit Clock Event Device: lapic grep Clock /proc/timer_list (after patching) Clock Event Device: hpet Clock Event Device: lapic Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: reserve dma32 early for gartYinghai Lu
a system with 256 GB of RAM, when NUMA is disabled crashes the following way: Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Cannot allocate aperture memory hole (ffff8101c0000000,65536K) Kernel panic - not syncing: Not enough memory for aperture Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33 Call Trace: [<ffffffff84037c62>] panic+0xb2/0x190 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310 [<ffffffff84506a2f>] ? _etext+0x0/0x1 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40 [<ffffffff847ac795>] mem_init+0x45/0x1a0 [<ffffffff8479ff35>] start_kernel+0x295/0x380 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230 the root cause is : memmap PMD is too big, [ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0 almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G. solution will be: 1. make memmap allocation get memory above 4G... 2. reserve some dma32 range early before we try to set up memmap for all. and release that before pci_iommu_alloc, so gart or swiotlb could get some range under 4g limit for sure. the patch is using method 2. because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP will get Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: add the DFF (Desktop Form Factor) Dell Optiplex 745 to the reboot ↵Coleman Kane
errata list We recently got some of the "Desktop Form Factor" Optiplex 745's in. I noticed that there's an entry for the SFF one's, but the BIOS model number of the DFF differs from that of the SFF. We have been reliably experiencing the same (as far as I can tell) reboot bug as the SFF boxes. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86/visws: fix printk format warningsRandy Dunlap
Fix visws printk format warnings: /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 2 has type 'u32' /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: tight online check in setup_per_cpu_areasYinghai Lu
when numa disabled I got this compile warning: arch/x86/kernel/setup64.c: In function setup_per_cpu_areas: arch/x86/kernel/setup64.c:147: warning: the address of contig_page_data will always evaluate as true it seems we missed checking if the node is online before we try to refer NODE_DATA. Fix it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix dma_alloc_pagesYinghai Lu
memory-less node support: this patch uses updated dev_to_node, because dev_to_node already makes sure it returns an online node. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) [NET] ifb: set separate lockdep classes for queue locks [IPV6] KCONFIG: Fix description about IPV6_TUNNEL. [TCP]: Fix shrinking windows with window scaling netpoll: zap_completion_queue: adjust skb->users counter bridge: use time_before() in br_fdb_cleanup() [TG3]: Fix build warning on sparc32. MAINTAINERS: bluez-devel is subscribers-only audit: netlink socket can be auto-bound to pid other than current->pid (v2) [NET]: Fix permissions of /proc/net [SCTP]: Fix a race between module load and protosw access [NETFILTER]: ipt_recent: sanity check hit count [NETFILTER]: nf_conntrack_h323: logical-bitwise & confusion in process_setup() [RT2X00] drivers/net/wireless/rt2x00/rt2x00dev.c: remove dead code, fix warning [IPV4]: esp_output() misannotations [8021Q]: vlan_dev misannotations xfrm: ->eth_proto is __be16 [IPV4]: ipv4_is_lbcast() misannotations [SUNRPC]: net/* NULL noise [SCTP]: fix misannotated __sctp_rcv_asconf_lookup() [PKT_SCHED]: annotate cls_u32 ...
2008-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Use relative paths for mach/cpu symlinks. SH: Use newer, non-deprecated __SPIN_LOCK_UNLOCKED macro. sh: Fix more user header breakage from sh64 integration. sh: Fix uImage build error. sh: Fix up the timer IRQ definition for SH7203. sh: Fix up the address error exception handler for SH-2. serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF.
2008-03-21sh: Use relative paths for mach/cpu symlinks.Franck Bui-Huu
When building the kernel without passing the O= command line parameter there's no point to use absolute paths for them. Usually relative paths are preferred because they survive directory moves, work across networked file systems and chrooted environments. Absolute paths are still used if an output directory is given. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-21SH: Use newer, non-deprecated __SPIN_LOCK_UNLOCKED macro.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4872/1: Replaces buggy macro in S3C2410 irq include [ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPAT [ARM] 4869/1: ARM: OMAP: Fix compile for mcbsp [ARM] 4865/1: Register the F75375 device in the GLAN Tank platform code [ARM] 4864/1: Enable write buffer coalescing on IOP [ARM] 4863/1: AT91: CAP9 USART definitions for early debug [ARM] 4861/1: AT91: Update maintainer email address (again) ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
2008-03-20[S390] futex: let futex_atomic_cmpxchg_pt survive early functional tests.Heiko Carstens
a0c1e9073ef7428a14309cba010633a6cd6719ea "futex: runtime enable pi and robust functionality" introduces a test wether futex in atomic stuff works or not. It does that by writing to address 0 of the kernel address space. This will crash on older machines where addressing mode switching is enabled but where the mvcos instruction is not available. Page table walking is done by hand and therefore the code tries to access current->mm which is NULL. Therefore add an extra check, so we survive the early test. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-03-20Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into m * 'omap-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
2008-03-20[ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPATjanboe
fix signal return code when enable CONFIG_OABI_COMPAT Signed-off-by: Janboe Ye <janboe.ye@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 23:39:41 +0000