aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-03-22x86: revert: reserve dma32 early for gartThomas Gleixner
Revert commit f62f1fc9ef94f74fda2b456d935ba2da69fa0a40 Author: Yinghai Lu <yhlu.kernel@gmail.com> Date: Fri Mar 7 15:02:50 2008 -0800 x86: reserve dma32 early for gart The patch has a dependency on bootmem modifications which are not .25 material that late in the -rc cycle. The problem which is addressed by the patch is limited to machines with 256G and more memory booted with NUMA disabled. This is not a .25 regression and the audience which is affected by this problem is very limited, so it's safer to do the revert than pulling in intrusive bootmem changes right now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86_64: free_bootmem should take physYinghai Lu
so use nodedata_phys directly. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: trim mtrr don't close gap for resource allocation.Yinghai Lu
fix the bug reported here: http://bugzilla.kernel.org/show_bug.cgi?id=10232 use update_memory_range() instead of add_memory_range() directly to avoid closing the gap. ( the new code only affects and runs on systems where the MTRR workaround triggers. ) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix reboot problem with Dell Optiplex 745, 0KW626 boardHeinz-Ado Arnolds
we have seen a little problem in rebooting Dell Optiplex 745 with the 0KW626 board. Here is a small patch enabling reboot with this board, which forces the default reboot path it into the BIOS reboot mode. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix fault_msg nul terminationJiri Slaby
The fault_msg text is not explictly nul terminated now in startup assembly. Do so by converting .ascii to .asciz. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix long standing bug with usb after hibernation with 4GB ramPavel Machek
aperture_64.c takes a piece of memory and makes it into iommu window... but such window may not be saved by swsusp -- that leads to oops during hibernation. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: hpet clock enable quirk on nVidia nForce 430Zbigniew Luszpinski
this patch allows hpet=force on nVidia nForce 430 southbridge. This patch was tested by me on my old Asus A8N-VM CSM (where bios does not support hpet and does not advertise it via acpi entry). My nForce430 version: lspci -nn | grep LPC 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Kernel 2.6.24.3 after patching and using hpet=force reports this: dmesg | grep -i hpet Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap vt.default_utf8=0 hpet=force Force enabled HPET at base address 0xfed00000 hpet clockevent registered Time: hpet clocksource has been installed. grep -i hpet /proc/timer_list Clock Event Device: hpet set_next_event: hpet_legacy_next_event set_mode: hpet_legacy_set_mode grep Clock /proc/timer_list (before patching) Clock Event Device: pit Clock Event Device: lapic grep Clock /proc/timer_list (after patching) Clock Event Device: hpet Clock Event Device: lapic Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: reserve dma32 early for gartYinghai Lu
a system with 256 GB of RAM, when NUMA is disabled crashes the following way: Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Cannot allocate aperture memory hole (ffff8101c0000000,65536K) Kernel panic - not syncing: Not enough memory for aperture Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33 Call Trace: [<ffffffff84037c62>] panic+0xb2/0x190 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310 [<ffffffff84506a2f>] ? _etext+0x0/0x1 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40 [<ffffffff847ac795>] mem_init+0x45/0x1a0 [<ffffffff8479ff35>] start_kernel+0x295/0x380 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230 the root cause is : memmap PMD is too big, [ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0 almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G. solution will be: 1. make memmap allocation get memory above 4G... 2. reserve some dma32 range early before we try to set up memmap for all. and release that before pci_iommu_alloc, so gart or swiotlb could get some range under 4g limit for sure. the patch is using method 2. because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP will get Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: add the DFF (Desktop Form Factor) Dell Optiplex 745 to the reboot ↵Coleman Kane
errata list We recently got some of the "Desktop Form Factor" Optiplex 745's in. I noticed that there's an entry for the SFF one's, but the BIOS model number of the DFF differs from that of the SFF. We have been reliably experiencing the same (as far as I can tell) reboot bug as the SFF boxes. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86/visws: fix printk format warningsRandy Dunlap
Fix visws printk format warnings: /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 2 has type 'u32' /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: tight online check in setup_per_cpu_areasYinghai Lu
when numa disabled I got this compile warning: arch/x86/kernel/setup64.c: In function setup_per_cpu_areas: arch/x86/kernel/setup64.c:147: warning: the address of contig_page_data will always evaluate as true it seems we missed checking if the node is online before we try to refer NODE_DATA. Fix it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21x86: fix dma_alloc_pagesYinghai Lu
memory-less node support: this patch uses updated dev_to_node, because dev_to_node already makes sure it returns an online node. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) [NET] ifb: set separate lockdep classes for queue locks [IPV6] KCONFIG: Fix description about IPV6_TUNNEL. [TCP]: Fix shrinking windows with window scaling netpoll: zap_completion_queue: adjust skb->users counter bridge: use time_before() in br_fdb_cleanup() [TG3]: Fix build warning on sparc32. MAINTAINERS: bluez-devel is subscribers-only audit: netlink socket can be auto-bound to pid other than current->pid (v2) [NET]: Fix permissions of /proc/net [SCTP]: Fix a race between module load and protosw access [NETFILTER]: ipt_recent: sanity check hit count [NETFILTER]: nf_conntrack_h323: logical-bitwise & confusion in process_setup() [RT2X00] drivers/net/wireless/rt2x00/rt2x00dev.c: remove dead code, fix warning [IPV4]: esp_output() misannotations [8021Q]: vlan_dev misannotations xfrm: ->eth_proto is __be16 [IPV4]: ipv4_is_lbcast() misannotations [SUNRPC]: net/* NULL noise [SCTP]: fix misannotated __sctp_rcv_asconf_lookup() [PKT_SCHED]: annotate cls_u32 ...
2008-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Use relative paths for mach/cpu symlinks. SH: Use newer, non-deprecated __SPIN_LOCK_UNLOCKED macro. sh: Fix more user header breakage from sh64 integration. sh: Fix uImage build error. sh: Fix up the timer IRQ definition for SH7203. sh: Fix up the address error exception handler for SH-2. serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF.
2008-03-21sh: Use relative paths for mach/cpu symlinks.Franck Bui-Huu
When building the kernel without passing the O= command line parameter there's no point to use absolute paths for them. Usually relative paths are preferred because they survive directory moves, work across networked file systems and chrooted environments. Absolute paths are still used if an output directory is given. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-21SH: Use newer, non-deprecated __SPIN_LOCK_UNLOCKED macro.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4872/1: Replaces buggy macro in S3C2410 irq include [ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPAT [ARM] 4869/1: ARM: OMAP: Fix compile for mcbsp [ARM] 4865/1: Register the F75375 device in the GLAN Tank platform code [ARM] 4864/1: Enable write buffer coalescing on IOP [ARM] 4863/1: AT91: CAP9 USART definitions for early debug [ARM] 4861/1: AT91: Update maintainer email address (again) ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
2008-03-20[S390] futex: let futex_atomic_cmpxchg_pt survive early functional tests.Heiko Carstens
a0c1e9073ef7428a14309cba010633a6cd6719ea "futex: runtime enable pi and robust functionality" introduces a test wether futex in atomic stuff works or not. It does that by writing to address 0 of the kernel address space. This will crash on older machines where addressing mode switching is enabled but where the mvcos instruction is not available. Page table walking is done by hand and therefore the code tries to access current->mm which is NULL. Therefore add an extra check, so we survive the early test. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-03-20Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into m * 'omap-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
2008-03-20[ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPATjanboe
fix signal return code when enable CONFIG_OABI_COMPAT Signed-off-by: Janboe Ye <janboe.ye@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-20[ARM] 4865/1: Register the F75375 device in the GLAN Tank platform codeGordon Farquharson
This patch adds the code required to register the F75375 device on the GLAN Tank. Signed-off-by: Gordon Farquharson <gordonfarquharson@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-20[ARM] 4864/1: Enable write buffer coalescing on IOPArnaud Patard
Some bootloaders are disabling write buffer coalescing. Enable it back under linux. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-20ARM: OMAP1: Fix typo in OMAP1 MPU clock source initializationWill Newton
Fix typo in OMAP1 MPU clock source initialization. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix DMA CLINK mask, clear spurious interruptGadiyar, Anand
Fix CLINK mask, clear spurious interrupt. Signed-off-by: Gadiyar, Anand <gadiyar@ti.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix chain_a_transfer return valueAnand Gadiyar
This patch changes the return value of omap_dma_chain_a_transfer to 0 on success instead of the flag 'start_dma', which wasn't really useful for anything. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix missing makefile optionsTony Lindgren
Although audio and dsp drivers are not integrated yet, allow compiling in mailbox and mcbsp to see any build warnings. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix GPIO IRQ unmaskKevin Hilman
GPIO IRQ unmask doesn't actually do anything useful. The problem is hidden by a separate explicit mass unmask at the end of the chained bank handler. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix clockevent support for hrtimersKevin Hilman
One-shot mode was broken in MPU-timer support for OMAP1 due to a typo. Also, ensure timer is stopped before changing the auto-reload flag. The TRM says changing the AR flag when timer is running is undefined. Also set GENERIC_CLOCKEVENTS for all omaps. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Hide resources on Axon PCIE root complex nodesMichael Ellerman
The PCI bridge representing the PCIE root complex on Axon, contains device BARs for a memory range and ROM that define inbound accesses. This confuses the kernel resource management code -- the resources need to be hidden when Axon is a host bridge. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix cell IOMMU code to cope with empty dma-ranges and non-PCI devicesMichael Ellerman
The cell IOMMU code to parse the dma-ranges properties, used for the fixed mapping, was broken in two ways for some devices. Firstly it didn't cope with empty dma-ranges properties. An empty property implies no translation so can be safely skipped. The code also wrongly assumed it would be looking at PCI devices, and hard coded the number of address and size cells. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix build failure for tqm8540 and sbc85xx defconfigsPaul Gortmaker
The wrapper script didn't have entries for the TQM8540 board and the SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is 8250 based and not CPM based by looking at its defconfig. There was also a trailing * on the TQM8555 entry that I removed too. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Fix PMU + soft interrupt disable bugAnton Blanchard
Since the PMU is an NMI now, it can come at any time we are only soft disabled. We must hard disable around the two places we allow the kernel stack SLB and r1 to go out of sync. Otherwise the PMU exception can force a kernel stack SLB into another slot, which can lead to it getting evicted, which can lead to a nasty unrecoverable SLB miss in the exception entry code. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] user_regset PTRACE_SETREGS regression fixRoland McGrath
The PTRACE_SETREGS request was only recently added on powerpc, and gdb does not use it. So it slipped through without getting all the testing it should have had. The user_regset changes had a simple bug in storing to all of the 32-bit general registers block on 64-bit kernels. This bug only comes up with PTRACE_SETREGS, not PPC_PTRACE_SETREGS. It causes a BUG_ON to hit, so this fix needs to go in ASAP. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-03-17[NET] endianness noise: INADDR_ANYAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-16Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] make ptr_to_pide() static [PARISC] head.S: section mismatch fixes [PARISC] add back Crestone Peak cpu [PARISC] futex: special case cmpxchg NULL in kernel space [PARISC] clean up show_stack [PARISC] add pa8900 CPUs to hardware inventory [PARISC] clean up include/asm-parisc/elf.h [PARISC] move defconfig to arch/parisc/configs/ [PARISC] add back AD1889 MAINTAINERS entry [PARISC] pdc_console: fix bizarre panic on boot [PARISC] dump_stack in show_regs [PARISC] pdc_stable: fix compile errors [PARISC] remove unused pdc_iodc_printf function [PARISC] bump __NR_syscalls [PARISC] unbreak pgalloc.h [PARISC] move VMALLOC_* definitions to fixmap.h [PARISC] wire up timerfd syscalls [PARISC] remove old timerfd syscall
2008-03-15[PARISC] head.S: section mismatch fixesHelge Deller
- move boot_args[] into the init section - move $global$ into the read_mostly section - fix the following two section mismatches: WARNING: vmlinux.o(.text+0x9c): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') WARNING: vmlinux.o(.text+0xa0): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') Signed-off-by: Helge Deller <deller@gmx.de> SIgned-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-03-15[PARISC] add back Crestone Peak cpuKyle McMartin
Crestone Peak Slow is the 800MHz PA-8800 cpu in the C8000. 0x88B is probably the Crestone Peak Fast. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-03-15[PARISC] clean up show_stackKyle McMartin
When we show_regs, we obviously have a struct pt_regs of the calling frame. Use these in show_stack so we don't have the entire bogus call trace up to the show_stack call. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-03-15[PARISC] add pa8900 CPUs to hardware inventoryJames Bottomley
This patch adds the known pa8900 CPUs to the inventory list and removes the Crestone Peak one which apparently never escaped into the wild. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-03-15[PARISC] move defconfig to arch/parisc/configs/Adrian Bunk
This patch moves the default parisc defconfig to arch/parisc/configs/generic_defconfig where it belongs and selects it as the default defconfig through KBUILD_DEFCONFIG. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-03-15[PARISC] pdc_console: fix bizarre panic on bootKyle McMartin
Commit 721fdf34167580ff98263c74cead8871d76936e6 introduced a subtle bug by accidently removing the "static" from iodc_dbuf. This resulted in, what appeared to be, a trap without *current set to a task. Probably the result of a trap in real mode while calling firmware. Also do other misc clean ups. Since the only input from firmware is non blocking, share iodc_dbuf between input and output, and spinlock the only callers. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2008-03-15[PARISC] dump_stack in show_regsKyle McMartin
Originally, show_stack was used in BUG() output. However, a recent commit changed it to print register state (no idea what that's supposed to help, really...) and parisc was missing a backtrace because of it. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2008-03-15[PARISC] remove unused pdc_iodc_printf functionKyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2008-03-15[PARISC] wire up timerfd syscallsKyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2008-03-15[PARISC] remove old timerfd syscallKyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2008-03-14sh: Fix uImage build error.Paul Mundt
The printf string was broken in the same way the zImage one was before, though the uImage managed to avoid getting fixed at that time. Do so now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits) ACPI: thermal: show temperature in millidegree Celsius thermal: fix generic thermal I/F for hwmon acer-wmi: build depends on i8042 documentation: Move power-related files to Documentation/power/ ACPI: buffer array too short in drivers/acpi/system.c acer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610 acer-wmi: Fix DSDT path in documentation acer-wmi: Make device detection error messages more descriptive laptops: move laptop-mode.txt to Documentation/laptops/ ACPICA: Warn if packages with invalid references are evaluated ACPI: add _PRT quirks to work around broken firmware Hibernation: Fix mark_nosave_pages() ACPI: Ignore _BQC object when registering backlight device ACPI: WMI: Clean up handling of spec violating data blocks acer-wmi: Don't warn if mail LED cannot be detected acer-wmi: Rename mail LED correctly & remove hardcoded colour ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify() ACPI: button: make real parent for input devices in device tree toshiba_acpi: Enable autoloading ACPI: EC: Handle IRQ storm on Acer laptops ...
2008-03-13alpha: use iommu_is_span_boundary helper functionFUJITA Tomonori
iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs (commit 3715863aa142c4f4c5208f5f3e5e9bac06006d2f). Alpha's IOMMU can use it. This removes the check on the boundary size alignment because iommu_is_span_boundary does. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 07:49:09 +0000