aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-05-19powerpc/qe: update risc allocation for QEHaiying Wang
Change the RISC allocation to macros instead of enum, add function to read the number of risc engines from the new property "fsl,qe-num-riscs" under the qe node in dts. Add new property "fsl,qe-num-riscs" description in qe.txt Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: clean up for mpc8568_mds nameHaiying Wang
Keep an unique machine def for the MPC8568 MDS board to handle some subtle differences between the future MDS board. Also set the bcsrs in setup_arch() only for mpc8568_mds because other mds has different bcsr settings. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/86xx: clean up smp init codeKumar Gala
Removed the need for asm/mpc86xx.h as it was only used in mpc86xx_smp.c and just moved the defines it cared about into there. Also fixed up the ioremap to only map the one 4k page we need access to and to iounmap when we are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/cpm: Remove some cruft code and definesKumar Gala
Kill of some old defines and macros that we no longer use like CPM_MAP_ADDR and CPM_IRQ_OFFSET. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc: make dma_window_* in pci_controller struct avail on 32bBecky Bruce
Also, convert them to resource_size_t (which is unsigned long on 64-bit, so it's not a change there). We will be using these on fsl 32b to indicate the start and size address of memory that the pci controller can actually reach - this is needed to determine if an address requires bounce buffering. For now, initialize them to a standard value; in the near future, the value will be calculated based on how the inbound windows are programmed. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systemsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systemsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: use of_iomap() for rstcr mappingKumar Gala
The rstcr register mapping code was written sometime ago before of_iomap() existed. We can use it and clean up the code a bit and get rid of one user of get_immrbase() in the process. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/86xx: Add 36-bit device tree for mpc8641hpcnBecky Bruce
The new dts places most of the devices in physical address space above 32-bits, which allows us to have more than 4GB of RAM present. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc: Refactor board check for PCI quirks on FSL boards with uli1575Kumar Gala
Refactor the check to determine if the quirk is applicable to the boards into one inline function so we only have to change one place to add more boards that the quirks might be applicable to. Also removed a warning related to unused temp variable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: Remove cell-index from PCI nodesKumar Gala
The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/oprofile: Remove unused dump_pmcs() in FSL oprofileMichael Ellerman
It's still in the git history if anyone wants it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: DaVinci EVM board support buildfixes ASoC: DaVinci I2S updates ASoC: davinci-pcm buildfixes ALSA: pcsp: fix printk format warning ALSA: riptide: postfix increment and off by one pxa2xx-ac97: fix reset gpio mode setting ASoC: soc-core: fix crash when removing not instantiated card
2009-05-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: gdb documentation fix kgdb,i386: use address that SP register points to in the exception frame sysrq, intel_fb: fix sysrq g collision
2009-05-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "mm: add /proc controls for pdflush threads" viocd: needs to depend on BLOCK block: fix the bio_vec array index out-of-bounds test
2009-05-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix PCI ROM access powerpc/pseries: Really fix the oprofile CPU type on pseries serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. powerpc/cell: Make ptcal more reliable powerpc: Allow mem=x cmdline to work with 4G+ powerpc/mpic: Fix incorrect allocation of interrupt rev-map powerpc: Fix oprofile sampling of marked events on POWER7 powerpc/iseries: Fix pci breakage due to bad dma_data initialization powerpc: Fix mktree build error on Mac OS X host powerpc/virtex: Fix duplicate level irq events. powerpc/virtex: Add uImage to the default images list powerpc/boot: add simpleImage.* to clean-files list powerpc/8xx: Update defconfigs powerpc/embedded6xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
2009-05-15Merge branch 'fix/asoc' into for-linusTakashi Iwai
* fix/asoc: ASoC: DaVinci EVM board support buildfixes ASoC: DaVinci I2S updates ASoC: davinci-pcm buildfixes pxa2xx-ac97: fix reset gpio mode setting ASoC: soc-core: fix crash when removing not instantiated card
2009-05-15kgdb,i386: use address that SP register points to in the exception frameJason Wessel
The treatment of the SP register is different on x86_64 and i386. This is a regression fix that lived outside the mainline kernel from 2.6.27 to now. The regression was a result of the original merge consolidation of the i386 and x86_64 archs to x86. The incorrectly reported SP on i386 prevented stack tracebacks from working correctly in gdb. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-05-15ASoC: DaVinci EVM board support buildfixesDavid Brownell
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15powerpc: Fix PCI ROM accessBenjamin Herrenschmidt
A couple of issues crept in since about 2.6.27 related to accessing PCI device ROMs on various powerpc machines. First, historically, we don't allocate the ROM resource in the resource tree. I'm not entirely certain of why, I susepct they often contained garbage on x86 but it's hard to tell. This causes the current generic code to always call pci_assign_resource() when trying to access the said ROM from sysfs, which will try to re-assign some new address regardless of what the ROM BAR was already set to at boot time. This can be a problem on hypervisor platforms like pSeries where we aren't supposed to move PCI devices around (and in fact probably can't). Second, our code that generates the PCI tree from the OF device-tree (instead of doing config space probing) which we mostly use on pseries at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any resource. That means that any attempt at re-assigning such a resource with pci_assign_resource() would fail due to resource_alignment() returning 0. This fixes this by doing these two things: - The code that calculates resource flags based on the OF device-node is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at it also set IORESOURCE_READONLY for ROMs since we were lacking that too - We now allocate ROM resources as part of the resource tree. However to limit the chances of nasty conflicts due to busted firmwares, we only do it on the second pass of our two-passes allocation scheme, so that all valid and enabled BARs get precedence. This brings pSeries back the ability to access PCI ROMs via sysfs (and thus initialize various video cards from X etc...). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc/pseries: Really fix the oprofile CPU type on pseriesBenjamin Herrenschmidt
My previous pach for fixing the oprofile CPU type got somewhat mismerged (by my fault) when it collided with another related patch. This should finally (fingers crossed) fix the whole thing. We make sure we keep the -old- oprofile type and CPU type whenever one of them was specified in the first pass through the function. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc/cell: Make ptcal more reliableGerhard Stenzel
There have been a series of checkstops on QS21 related to ptcal being set up incorrectly. On systems that only have memory on a single node, ptcal fails when it gets a pointer to memory on the remote node. Moreover, agressive prefetching in memcpy and other functions may accidentally touch the first cache line of the page that we reserve for ptcal, which causes an ECC checkstop. We now allocate pages only from the specified node, moves the ptcal area into the middle of the allocated page to avoid potential prefetch problems and prints the address of the ptcal area to facilitate diagnostics. Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc: Allow mem=x cmdline to work with 4G+Becky Bruce
We're currently choking on mem=4g (and above) due to memory_limit being specified as an unsigned long. Make memory_limit phys_addr_t to fix this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc/mpic: Fix incorrect allocation of interrupt rev-mapKumar Gala
Before when we were setting up the irq host map for mpic we passed in just isu_size for the size of the linear map. However, for a number of mpic implementations we have no isu (thus pass in 0) and will end up with a no linear map (size = 0). This causes us to always call irq_find_mapping() from mpic_get_irq(). By moving the allocation of the host map to after we've determined the number of sources we can actually benefit from having a linear map for the non-isu users that covers all the interrupt sources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc: Fix oprofile sampling of marked events on POWER7Maynard Johnson
Description ----------- Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on older processors where those bits are defined. Background ---------- The performance monitor unit of the 64-bit POWER processor family has the ability to collect accurate instruction-level samples when profiling on marked events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA register contained "slot information" that the oprofile kernel driver used to adjust the value latched in the SIAR at the time of a PMU interrupt. But as of POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use, since the SIAR itself holds the accurate sampled instruction address. With POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of these slot bits was, in effect, a NOP. But with POWER7, these bits are no longer zero'ed out; however, they serve some other purpose rather than slot information. Thus, using these bits on POWER7 to adjust the SIAR value results in samples being attributed to the wrong instructions. The attached patch changes the oprofile kernel driver to ignore these slot bits on all newer processors starting with POWER6. Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc/iseries: Fix pci breakage due to bad dma_data initializationStephen Rothwell x
Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and 64-bit dma code" made changes to the PCI initialisation code that added an assignment to archdata.dma_data but only for 32 bit code. Commit 7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups of pci-common.c" removed the conditional compilation. Unfortunately, the iSeries code setup the archdata.dma_data before that assignment was done - effectively overwriting the dma_data with NULL. Fix this up by moving the iSeries setup of dma_data into a pci_dma_dev_setup callback. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15powerpc: Fix mktree build error on Mac OS X hostTimur Tabi
The mktree utility defines some variables as "uint", although this is not a standard C type, and so cross-compiling on Mac OS X fails. Change this to "unsigned int". Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-14powerpc/virtex: Fix duplicate level irq events.John Linn
The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-14powerpc/virtex: Add uImage to the default images listGrant Likely
It is common to use U-Boot on Xilinx Virtex platforms. This patch ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-14powerpc/boot: add simpleImage.* to clean-files listGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-14MIPS: Sibyte: Fix locking in set_irq_affinityThomas Bogendoerfer
Locking of irq_desc is now done in irq_set_affinity; don't lock it again in chip specific set_affinity function. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Use force_sig when handling address errors.David Daney
When init is started it is SIGNAL_UNKILLABLE. If it were to get an address error, we would try to send it SIGBUS, but it would be ignored and the faulting instruction restarted. This results in an endless loop. We need to use force_sig() instead so it will actually die and give us some useful information. Reported-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()Coly Li
This patch modifies parameter of octeon_cvmcount_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li <coly.li@suse.de> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.Ralf Baechle
The inline assembler used on 32-bit kernels was using the "h" constraint which was considered dangerous and removed for gcc 4.4.0. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Fix highmem.Ralf Baechle
Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp. b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org): > From: Chris Dearman <chris@mips.com> > Date: Wed, 19 Sep 2007 00:58:24 +0100 > Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time. > > Slightly tacky, but there is a precedent in the sparc archirecture code. introduces the variable _page_cachable_default, which defaults to zero and. is used to create the prototype PTE for __kmap_atomic in arch/mips/mm/init.c:kmap_init before initialization in arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be used as the CCA of kmap atomic pages which on many processors is not a defined CCA value and may result in writes to kmap_atomic pages getting corrupted. Debugged by Jon Fraser (jfraser@broadcom.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.Ralf Baechle
Probably nobody does arithmetic on cp0 register values so this has never bitten. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: MSP71xx: Remove the RAMROOT functionsShane McDonald
The RAMROOT function was a successful but non-portable attempt to append the root filesystem to the end of the kernel image. The preferred and portable solution is to use an initramfs instead. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Use -mno-check-zero-divisionRalf Baechle
I don't think that in 15 years of Linux/MIPS the zero division checking code generated by gcc by default has ever caught anything. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Set compiler options only after the compiler prefix has ben set.Ralf Baechle
Otherwise indigestable options might be passed to the host compiler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: uaccess: Switch lock annotations to might_fault().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx resetShane McDonald
There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves compilation problems with attempting to reset the board using non-existent GPIO routines. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: MSP71xx: Resolve multiple definition of plat_timer_setupShane McDonald
There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves the "multiple definition of plat_timer_setup" problem, and creates the required get_c0_compare_int function. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Make uaccess.h slightly more sparse friendly.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Make access_ok() sideeffect proof.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.hThomas Bogendoerfer
There was already a define for NMI_OFFSET in asm/sn/addr.h, which now clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27 builds.. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Alchemy: Timer build fixManuel Lauss
Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Cavium: Add support for 8k and 32k page sizes.Ralf Baechle
Beyond the requirements of the architecture standard Cavium also supports 8k and 32k pages. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Daney <ddaney@caviumnetworks.com>
2009-05-14MIPS: TXx9: Fix possible overflow in clock calculationsAtsushi Nemoto
Addition of -fwrapv option in 2.6.29 discloses possible overflow with signed arithmetics. For example, result of "a * 6 / 12" (int a = 400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv. Change some variable to unsigned to avoid such overflows. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>