aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-12-02[ARM] locomo: export locomo_frontlight_set()Eric Miao
This symbol is required by locomo backlight driver, exporting this allows the driver to be built as a module. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add missing GPIOs definitionsEric Miao
GPIO3/GPIO4 are a bit special on pxa27x, since it depends on PCFR/PI2C_EN bit, add their definitions here with comments. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
2008-12-02[ARM] pxa: add base PXA935 support due to CPUID changeEric Miao
PXA935 has changed its implementor ID from Intel to Marvell, this patch modifies arch/arm/boot/compressed/head.S and proc-xsc3.S to support a smooth bootup. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move I2C pin configurations out into board specific filesEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: register Power I2C device only when necessaryEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move power I2C device definitions into devices.cEric Miao
Let's put these devices into a central place even if they are now processor specific, as they might be re-used in later processors. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: remove unnecessary #include of pxa2xx-gpio.h in clock.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: include <mach/hardware.h> in pxa-regs.hEric Miao
for the reference of __REG() within <mach/hardware.h> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: further cleanup of pxa-regs.hEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move GPIOx_BASE and GPIO register offsets to gpio.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.hEric Miao
The optimal change would be to move the AC97 register definitions into the AC97 driver, unfortunately, the registers are shared between several files. Move them into a dedicated regs-ac97.h first. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move UART register definitions into dedicated regs-uart.hEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move pxa2xx specific PWRMODE definitions into pxa2xx-regs.hEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: remove the now unused IMPMCR/IMPMSR register definitionsEric Miao
There two are internal registers that are used to control the power management of the Internal Memory (i.e. Internal SRAM). They are referenced nowhere and removed here to simplify pxa-regs.h a bit. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: remove unused PWM register definitions, use generic PWM APIEric Miao
We now have generic PWM API for PXA, the PWM registers definitions are now used nowhere, and it is not encouraged to manipulate them directly by driver code. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move FICP register definitions into pxaficp_ir.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move camera (QCI) registers definition out of pxa-regs.hEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-12-02[ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.hEric Miao
pxa_gpio_{get,set}_value() are not used anymore, remove them from hardware.h. Declaration of pxa_gpio_mode() is still being referenced and thus moved into pxa2xx-gpio.h Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add support for additional GPIOs on PXA26xEric Miao
Original patch from Marek Vasut, the problems with PXA26x are: 1. there are additional 4 GPIOs 86,87,88,89 have their direction bits inverted in GPDR2, as well as their alternate function bits being '1' for their GPIO functionality in GAFRx 2. there is no easy way to decide if the processor is a pxa26x or a pxa250/pxa255 at run-time, so the assumption here is the pxa26x will be treated as one of the pxa25x variants, and board code should have a better knowledge of the processor it is featured Introduce pxa26x_init_irq() for the second purpose, and treat the additional GPIOs > 85 on PXA25x specially. Kconfig option CONFIG_CPU_PXA26x is introduced to optimize the code a bit when PXA26x support isn't needed. Board config options have to select this to enable the support for PXA26x. __gpio_is_inverted() will be optimized way when CONFIG_CPU_PXA26x isn't selected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02Revert "[ARM] pxa: introduce cpu_is_pxa26x()"Eric Miao
This reverts commit da1a3dc0ebb4f9209a1939eaa6b18901e0cd7bc0. The originally proposed way in the above commit is incorrect. And there is no easy way to distinguish between pxa25x and pxa26x at run-time. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: use 'pxa_last_gpio' instead of 'gpio_nr' in mfp-pxa2xx.cEric Miao
The 'gpio_nr' can really be inferred by 'pxa_last_gpio', and since we already have that variable, remove the unnecessary 'gpio_nr' now. Also, fix the incorrect GPIO number passed in pxa27x_init_irq(). Note: pxa_last_gpio should be initialized earlier, and this is true since it's been assigned in machine_desc->init_irq(). Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add muxed gpio wakeup sources on pxa2xx architecturesRobert Jarzmik
PXA SoC have several GPIOs muxed on only one wakeup source. Add support for these wakeup sources which were missing in mfp core support. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings [ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitz [ARM] pxa: fix I2C controller device being registered twice on Akita pxafb: only initialize the smart panel thread when dealing with a smartpanel pxafb: introduce LCD_TYPE_MASK and use it.
2008-11-20Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] xen: fix xen_get_eflags. [IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case. [IA64] remove duplicate include iommu.h [IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack [IA64] Rationalize kernel mode alignment checking
2008-11-20[IA64] xen: fix xen_get_eflags.Isaku Yamahata
fix xen_get_eflags. It doesn't take any argument. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20[IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case.Isaku Yamahata
pv_cpu_ops.getreg(_IA64_REG_IP) returned constant. But the returned ip valued should be the one in the caller, not of the callee. This patch fixes that. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20[IA64] remove duplicate include iommu.hHuang Weiyi
arch/ia64/kernel/pci-dma.c only needs to include iommu once. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20[IA64] use mprintk instead of printk, in ia64_mca_modify_original_stackHidetoshi Seto
Using printk from MCA/INIT context is unsafe since it can cause deadlock. The ia64_mca_modify_original_stack is called from both of mca handler and init handler, so it should use mprintk instead of printk. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20[IA64] Rationalize kernel mode alignment checkingTony Luck
Itanium processors can handle some misaligned data accesses. They also provide a mode where all such accesses are forced to trap. The kernel was schizophrenic about use of this mode: * Base kernel code ran in permissive mode where the only traps generated were from those cases that the h/w could not handle. * Interrupt, syscall and trap code ran in strict mode where all unaligned accesses caused traps to the 0x5a00 unaligned reference vector. Use strict alignment checking throughout the kernel, but make sure that we continue to let user mode use more relaxed mode as the default. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20x86: Fix interrupt leak due to migrationMatthew Wilcox
When we migrate an interrupt from one CPU to another, we set the move_in_progress flag and clean up the vectors later once they're not being used. If you're unlucky and call destroy_irq() before the vectors become un-used, the move_in_progress flag is never cleared, which causes the interrupt to become unusable. This was discovered by Jesse Brandeburg for whom it manifested as an MSI-X device refusing to use MSI-X mode when the driver was unloaded and reloaded repeatedly. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-20Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol. MIPS: csrc-r4k: Fix spelling mistake. MIPS: RB532: Provide functions for gpio configuration MIPS: IP22: Make indy_sc_ops variable static MIPS: RB532: GPIO register offsets are relative to GPIOBASE MIPS: Malta: Fix include paths in malta-amon.c
2008-11-20Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: uaccess_64: fix return value in __copy_from_user() x86: quirk for reboot stalls on a Dell Optiplex 330
2008-11-20parisc: fix bug in compat_arch_ptraceHelge Deller
Commit 81e192d6ce303b6792aa38ff35f41a1a7357f23a ("parisc: convert to generic compat_sys_ptrace") introduced a bug which segfaults the parisc 64bit kernel when stracing 32bit applications: Kernel Fault: Code=15 regs=00000000bafa42b0 (Addr=00000001baf5ab57) YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001011 Tainted: G W r00-03 000000ff0806ff0b 000000004068edc0 00000000401203f8 00000000fb3e2508 r04-07 0000000040686dc0 00000000baf5a800 fffffffffffffffc fffffffffb3e2508 r08-11 00000000baf5a800 000000000004b068 00000000000402b0 0000000000040d68 r12-15 0000000000042a9c 0000000000040a9c 0000000000040d60 0000000000042e9c r16-19 000000000004b060 000000000004b058 0000000000042d9c ffffffffffffffff r20-23 000000000800000b 0000000000000000 000000000800000b fffffffffb3e2508 r24-27 00000000fffffffc 0000000000000003 00000000fffffffc 0000000040686dc0 r28-31 00000001baf5a7ff 00000000bafa4280 00000000bafa42b0 00000000000001d7 sr00-03 0000000000fca000 0000000000000000 0000000000000000 0000000000fca000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040120400 0000000040120404 IIR: 4b9a06b0 ISR: 0000000000000000 IOR: 00000001baf5ab57 CPU: 0 CR30: 00000000bafa4000 CR31: 00000000d22344e0 ORIG_R28: 00000000fb3e2248 IAOQ[0]: compat_arch_ptrace+0xb8/0x160 IAOQ[1]: compat_arch_ptrace+0xbc/0x160 RP(r2): compat_arch_ptrace+0xb0/0x160 Backtrace: [<00000000401612ac>] compat_sys_ptrace+0x15c/0x180 [<0000000040104ef8>] syscall_exit+0x0/0x14 The problem is that compat_arch_ptrace() enters with an addr value of type compat_ulong_t and calls translate_usr_offset() to translate the address offset into a struct pt_regs offset like this: addr = translate_usr_offset(addr) this means that any return value of translate_usr_offset() is stored back as compat_ulong_t type into the addr variable. But since translate_usr_offset() returns -1 for invalid offsets, addr can now get the value 0xffffffff which then fails the next return-value sanity check and thus the kernel tries to access invalid memory: if (addr < 0) break; Fix this bug by modifying translate_usr_offset() to take and return values of type compat_ulong_t, and by returning the value "sizeof(struct pt_regs)" as an error indicator. Additionally change the sanity check to check for return values for >= sizeof(struct pt_regs). This patch survived my compile and run-tests. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-20MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: csrc-r4k: Fix spelling mistake.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: RB532: Provide functions for gpio configurationPhil Sutter
As gpiolib doesn't support pin multiplexing, it provides no way to access the GPIOFUNC register. Also there is no support for setting interrupt status and level. These functions provide access to them and are needed by the CompactFlash driver. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: IP22: Make indy_sc_ops variable staticDmitri Vorobiev
The indy_sc_ops variable in arch/mips/mm/sc-ip22.c is needlessly defined global, and this patch makes it static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2008-11-20MIPS: RB532: GPIO register offsets are relative to GPIOBASEFlorian Fainelli
This patch fixes the wrong use of GPIO register offsets in devices.c. To avoid further problems, use gpio_get_value to return the NAND status instead of our own expanded code. Also define the zero offset of the alternate function register to allow consistent access. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20MIPS: Malta: Fix include paths in malta-amon.cDavid Daney
On linux-queue, malta doesn't build after the include file relocation. This should fix it. There some occurrences of 'asm-mips' in the comments of quite a few files, but this is the only place I found it in any code. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-19Merge branch 'x86/numa' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/numa' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: make NUMA on 32-bit depend on EXPERIMENTAL again x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set
2008-11-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: more general identifier for Phoenix BIOS AMD IOMMU: check for next_bit also in unmapped area AMD IOMMU: fix fullflush comparison length AMD IOMMU: enable device isolation per default AMD IOMMU: add parameter to disable device isolation x86, PEBS/DS: fix code flow in ds_request() x86: add rdtsc barrier to TSC sync check xen: fix scrub_page() x86: fix es7000 compiling x86, bts: fix unlock problem in ds.c x86, voyager: fix smp generic helper voyager breakage x86: move iomap.h to the new include location
2008-11-19sparc64: wire up accept4()David Miller
This adds the sparc syscall hookups. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19reintroduce accept4Ulrich Drepper
Introduce a new accept4() system call. The addition of this system call matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(), inotify_init1(), epoll_create1(), pipe2()) which added new system calls that differed from analogous traditional system calls in adding a flags argument that can be used to access additional functionality. The accept4() system call is exactly the same as accept(), except that it adds a flags bit-mask argument. Two flags are initially implemented. (Most of the new system calls in 2.6.27 also had both of these flags.) SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled for the new file descriptor returned by accept4(). This is a useful security feature to avoid leaking information in a multithreaded program where one thread is doing an accept() at the same time as another thread is doing a fork() plus exec(). More details here: http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling", Ulrich Drepper). The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag to be enabled on the new open file description created by accept4(). (This flag is merely a convenience, saving the use of additional calls fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result. Here's a test program. Works on x86-32. Should work on x86-64, but I (mtk) don't have a system to hand to test with. It tests accept4() with each of the four possible combinations of SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies that the appropriate flags are set on the file descriptor/open file description returned by accept4(). I tested Ulrich's patch in this thread by applying against 2.6.28-rc2, and it passes according to my test program. /* test_accept4.c Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk <mtk.manpages@gmail.com> Licensed under the GNU GPLv2 or later. */ #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/socket.h> #include <netinet/in.h> #include <stdlib.h> #include <fcntl.h> #include <stdio.h> #include <string.h> #define PORT_NUM 33333 #define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0) /**********************************************************************/ /* The following is what we need until glibc gets a wrapper for accept4() */ /* Flags for socket(), socketpair(), accept4() */ #ifndef SOCK_CLOEXEC #define SOCK_CLOEXEC O_CLOEXEC #endif #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif #ifdef __x86_64__ #define SYS_accept4 288 #elif __i386__ #define USE_SOCKETCALL 1 #define SYS_ACCEPT4 18 #else #error "Sorry -- don't know the syscall # on this architecture" #endif static int accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags) { printf("Calling accept4(): flags = %x", flags); if (flags != 0) { printf(" ("); if (flags & SOCK_CLOEXEC) printf("SOCK_CLOEXEC"); if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK)) printf(" "); if (flags & SOCK_NONBLOCK) printf("SOCK_NONBLOCK"); printf(")"); } printf("\n"); #if USE_SOCKETCALL long args[6]; args[0] = fd; args[1] = (long) sockaddr; args[2] = (long) addrlen; args[3] = flags; return syscall(SYS_socketcall, SYS_ACCEPT4, args); #else return syscall(SYS_accept4, fd, sockaddr, addrlen, flags); #endif } /**********************************************************************/ static int do_test(int lfd, struct sockaddr_in *conn_addr, int closeonexec_flag, int nonblock_flag) { int connfd, acceptfd; int fdf, flf, fdf_pass, flf_pass; struct sockaddr_in claddr; socklen_t addrlen; printf("=======================================\n"); connfd = socket(AF_INET, SOCK_STREAM, 0); if (connfd == -1) die("socket"); if (connect(connfd, (struct sockaddr *) conn_addr, sizeof(struct sockaddr_in)) == -1) die("connect"); addrlen = sizeof(struct sockaddr_in); acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen, closeonexec_flag | nonblock_flag); if (acceptfd == -1) { perror("accept4()"); close(connfd); return 0; } fdf = fcntl(acceptfd, F_GETFD); if (fdf == -1) die("fcntl:F_GETFD"); fdf_pass = ((fdf & FD_CLOEXEC) != 0) == ((closeonexec_flag & SOCK_CLOEXEC) != 0); printf("Close-on-exec flag is %sset (%s); ", (fdf & FD_CLOEXEC) ? "" : "not ", fdf_pass ? "OK" : "failed"); flf = fcntl(acceptfd, F_GETFL); if (flf == -1) die("fcntl:F_GETFD"); flf_pass = ((flf & O_NONBLOCK) != 0) == ((nonblock_flag & SOCK_NONBLOCK) !=0); printf("nonblock flag is %sset (%s)\n", (flf & O_NONBLOCK) ? "" : "not ", flf_pass ? "OK" : "failed"); close(acceptfd); close(connfd); printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL"); return fdf_pass && flf_pass; } static int create_listening_socket(int port_num) { struct sockaddr_in svaddr; int lfd; int optval; memset(&svaddr, 0, sizeof(struct sockaddr_in)); svaddr.sin_family = AF_INET; svaddr.sin_addr.s_addr = htonl(INADDR_ANY); svaddr.sin_port = htons(port_num); lfd = socket(AF_INET, SOCK_STREAM, 0); if (lfd == -1) die("socket"); optval = 1; if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) die("setsockopt"); if (bind(lfd, (struct sockaddr *) &svaddr, sizeof(struct sockaddr_in)) == -1) die("bind"); if (listen(lfd, 5) == -1) die("listen"); return lfd; } int main(int argc, char *argv[]) { struct sockaddr_in conn_addr; int lfd; int port_num; int passed; passed = 1; port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM; memset(&conn_addr, 0, sizeof(struct sockaddr_in)); conn_addr.sin_family = AF_INET; conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); conn_addr.sin_port = htons(port_num); lfd = create_listening_socket(port_num); if (!do_test(lfd, &conn_addr, 0, 0)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0)) passed = 0; if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK)) passed = 0; close(lfd); exit(passed ? EXIT_SUCCESS : EXIT_FAILURE); } [mtk.manpages@gmail.com: rewrote changelog, updated test program] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Tested-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: <linux-api@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-18x86: uaccess_64: fix return value in __copy_from_user()Hiroshi Shimamoto
__copy_from_user() will return invalid value 16 when it fails to access user space and the size is 10. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18x86: quirk for reboot stalls on a Dell Optiplex 330Steve Conklin
Dell Optiplex 330 appears to hang on reboot. This is resolved by adding a quirk to set bios reboot. Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: Steve Conklin <steve.conklin@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18Merge branch 'iommu-fixes-2.6.28' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
2008-11-18x86: more general identifier for Phoenix BIOSPhilipp Kohlbecher
Impact: widen the reach of the low-memory-protect DMI quirk Phoenix BIOSes variously identify their vendor as "Phoenix Technologies, LTD" or "Phoenix Technologies LTD" (without the comma.) This patch makes the identification string in the bad_bios_dmi_table more general (following a suggestion by Ingo Molnar), so that both versions are handled. Again, the patched file compiles cleanly and the patch has been tested successfully on my machine. Signed-off-by: Philipp Kohlbecher <xt28@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18AMD IOMMU: check for next_bit also in unmapped areaJoerg Roedel
Impact: fix possible use of stale IO/TLB entries Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>